Operation Manual
Table Of Contents
- Contents
- Caring for our environment 2
- Warning and Safety instructions 6
- Operating the washing machine 13
- Before using for the first time 15
- Washing environmentally and economically 16
- How to wash correctly 17
- Spinning 22
- Programme chart 23
- Extras 26
- Garment care label symbols 27
- Programme sequence 28
- Changing the programme sequence 30
- Detergent 32
- Cleaning and care 36
- Problem solving guide 39
- The programme does not start 39
- The following fault messages appear in the display and the programme stops 40
- The following fault messages appear in the display at the end of the programme 41
- General problems 42
- An unsatisfactory wash result 43
- The drum door does not open when you press the Door button 44
- Opening the drum door in the event of a blocked drain outlet and/or power failure 45
- After sales service 47
- Installation and connection 48
- Consumption data 59
- Technical data 60
- Programmable functions 61
- To access programmable functions 61
- To select a programmable function 61
- To alter a programmable function 61
- To come out of programmable functions 61
- Language ! 61
- Water plus 62
- Gentle action 62
- Suds cooling 62
- Code 63
- Temperature unit 64
- Buzzer 64
- Keypad tone 64
- Brightness 64
- Contrast 64
- Standby display 65
- Memory 65
- Anti-crease 65
- Optional accessories 66
The programmable functions are
used to alter the machine's
electronics to suit changing
requirements.
Programmable functions can be
altered at any time.
To access programmable functions
The programmable functions are
accessed via the Start/Stop button
and the programme selector.
Before you begin, first ensure that:
– The washing machine is switched off.
– The machine door is closed properly.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B to C.
B Press the _ button in.
C As soon as...
Language ! ...
. . . appears in the display, release
the Start/Stop button.
To select a programmable function
D Turn the programme selector until
the programmable function you
require appears in the display.
E Press the Start/Stop button to confirm
your selection.
To alter a programmable function
You can see the different options
available for a programmable function
by turning the programme selector.
The option which is currently set will
have a tick L beside it.
F Turn the programme selector until
the option you want appears in the
display.
G Press the Start/Stop button to
activate this option.
To come out of programmable
functions
H Turn the programme selector until
Back
A appears in the display.
I Press the Start/Stop button.
Language !
The display can be set to appear in
one of several different languages.
The flag
! after the word Language acts
as a guide to prevent a language which
will not be understood from being set.
The language selected is saved to
memory.
Programmable functions
61