Operating instructions

A fault indicator light comes on but the wash programme
continues as normal.
What to do if . . . Possible cause Remedy
The CHECK LIGHT Drain
is flashing.
The drain outlet is
restricted.
Clean the fluff (drain) filter
and drain pump.
The CHECK LIGHT Water
inlet is flashing.
The water inlet is re
-
stricted or the water
pressure is too low.
–
make sure the stopcock is
opened wide enough.
–
make sure the inlet hose is
not kinked.
The filter in the inlet
hose is dirty.
Clean the filter.
The Final spin indicator
light flashes in the
programme sequence dis-
play.
The final spin has
not taken place.
The machine de-
tected an imbal-
ance.
– Loosen and re-distribute
the washing.
– Select the programme
Drain/Spin .
– Take into account the spin
speed of the relevant
programme.
The CHECK LIGHT
Locked is on.
Programme locking
is switched on.
Switch off the programme
locking.
The CHECK LIGHT Excess
detergent is flashing.
Excessive foam has
built up during
washing.
Use less detergent next time
and follow the recommenda
-
tion on the packaging.
Problem solving guide
44