Operation Manual

Final spin speed
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above as this is the maximum
suitable for the programme.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.
To omit the final spin (Rinse hold)
^
Select the Rinse hold extra option.
–
To start the final spin
:
Touch the Start sensor to begin the
final spin.
– To end the programme
:
Press the / button. The water will
drain away. Press the / button
again to open the door.
To omit the spin between rinses and
the final spin
^ Set the spin speed to 0.
The laundry is not spun after the final
rinse. The water will drain away and the
machine will go straight into the anti-
crease stage. With some programmes
an additional rinse is introduced if this
setting is selected.
Spinning
45
Programme rpm
Cottons 1600
Minimum iron 1200
Steam care –
Freshen up –
Delicates 600
Automatic plus 1200
Dark garments 1200
Shirts 600
Denim 900
Express 20 1600
Woollens / 1200
Silks / 600
Sportswear 1200
Trainers 1000
Outerwear 800
Hygiene 1600
First wash 1200
Proofing 1000
Curtains 600
Pillows 1200
Soft toys 900
Starch 1600
Separate rinse 1600
Drain –
Spin 1600