Operation Manual

Programme chart

Hygiene 30°C to 90°C Max. load 7.0 kg

Use for Cotton and linen fabric which have been in direct contact with the

skin, e.g. underwear, nappies, towelling, bed linen, pillow and

mattress covers or where high standards of hygiene are required.

Notes – For optimum hygiene results select a temperature of 60°C or

above.

– Observe the manufacturer's care label.

First wash cold to 40°C Max. load 3.0 kg

Use for New items made of cotton, towelling and polyester fabric.

Note Use this programme to wash any manufacturing residues out of

new items.

Proofing 40°C Max. load 2.5 kg

Use for Treating microfibre fabric, skiwear, and table linen made from

mainly synthetic fibres to provide a water and stain resistant finish.

Notes

–

The items should be freshly laundered and spun or dried before

proofing.

–

For best results, the items should be heat-treated afterwards,

either in a tumble dryer or by ironing.

Outerwear cold to 40°C Max. load 2.5 kg

Use for Outerwear made from membrane fabric such as Gore-Tex

SYMPATEX

, WINDSTOPPER

etc.

Notes

–

Zip up jackets before washing.

–

Do not use fabric conditioner.

–

If wished these garments can also be re-proofed using the

Proofing programme. Proofing should not be done every time

the garment is washed.