Operation and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Help protect our environment
- Guide to the washer
- Before using for the first time
- 1. Prepare the laundry
- 2. Load the laundry
- 3. Select a program
- 4. Selecting program settings
- 5. Add detergent
- 6. Start the program - Program end
- Spin cycle
- Delay Start
- Program guide
- Changing the programme sequence
- Detergent
- Cleaning and care
- Frequently asked questions
- Problem solving guide
- A wash program cannot be started
- The following fault message appears in the display and the program has been canceled
- A message appears in the display at the end of the program
- General problems with the washer
- Poor wash results
- The drum door cannot be opened
- Opening the drum door during a power failure
- After sales service
- MIELE
- Installation
- Setting the language
6. Start the program - Program end
19
Press the flashing Start button.
If the delay start is set, the remaining
times elapses in the display. Once the
delayed start time has elapsed or
immediately after the program start, the
approximate program running time is
displayed. The overall program time
may be shortened or lengthened.
Additionally the sequence cycle is
displayed. The washer shows the
current program step.
The drum light turns off once the
program starts.
Activate the Child Lock (if
desired)
The Child Lock can be activated to
prevent a child from canceling the
program and opening the door at the
end of a program.
Press and hold the Heavy soil button
until the display shows:
Locked
Deactivate the Child Lock
Press the "Heavy soil" button until the
display shows:
Ready to use
Tip: Once the program has finished, the
Child Lock must be deactivated.