Operation and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Help protect our environment
- Guide to the washer
- Before using for the first time
- 1. Prepare the laundry
- 2. Load the laundry
- 3. Select a program
- 4. Selecting program settings
- 5. Add detergent
- 6. Start the program - Program end
- Spin cycle
- Delay Start
- Program guide
- Changing the programme sequence
- Detergent
- Cleaning and care
- Frequently asked questions
- Problem solving guide
- A wash program cannot be started
- The following fault message appears in the display and the program has been canceled
- A message appears in the display at the end of the program
- General problems with the washer
- Poor wash results
- The drum door cannot be opened
- Opening the drum door during a power failure
- After sales service
- MIELE
- Installation
- Setting the language
Changing the programme sequence
27
Canceling a program
A program can be canceled any time
after the program start.
Press and hold the Cancel button
until the display shows:
Cancel
The wash water will be drained away.
To add or remove laundry
Open the drum door.
To select another program
The display requests the program
selection.
Press the desired program button.
Interrupting a program
Turn the washer off.
To continue:
Turn the washer on again.
Changing a program
A program change is not possible once
the program has started. The program
must be canceled.
Adjusting the temperature
The temperature can be changed up to
6 minutes after the program start.
Adjusting the spin speed
The spin speed can be adjusted
anytime until the beginning of the final
spin.
Adjusting the options
The options Extended or Sensitive can
be selected or deselected up to 6
minutes after the program start.
The Buzzer option can be selected or
deselected at any time.