Operation and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Help protect our environment
- Guide to the washer
- Before using for the first time
- 1. Prepare the laundry
- 2. Load the laundry
- 3. Select a program
- 4. Selecting program settings
- 5. Add detergent
- 6. Start the program - Program end
- Spin cycle
- Delay Start
- Program guide
- Changing the programme sequence
- Detergent
- Cleaning and care
- Frequently asked questions
- Problem solving guide
- A wash program cannot be started
- The following fault message appears in the display and the program has been canceled
- A message appears in the display at the end of the program
- General problems with the washer
- Poor wash results
- The drum door cannot be opened
- Opening the drum door during a power failure
- After sales service
- MIELE
- Installation
- Setting the language
Changing the programme sequence
28
Adding/removing laundry
during a wash program
Press and hold the door button until
the door opens.
Add or remove laundry.
Close the door.
The program continues automatically.
Note:
Once the program has started the
washer can not make adjustments of
the load size.
The drum door cannot be opened if:
– the water temperature is greater than
130°F (55°C).
– the water level is too high.
– the program has reached the "Final
Spin".
– The Child Lock function is activated.
If you attempt to open the door while
the washer is in one of the above
statuses "Machine locked" will appear
in the display.
Machine locked
Preparing your appliance for
an extended vacation
If you elect to turn off the water to your
home for an extended period of time,
please note that this may not be
enough to reduce the risk of a leak.
To be completely safe, you must turn
off the water supply to each
individual appliance.
This means under the sink for a
dishwasher, at the laundry bib for
your washer, etc.