Operation and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Help protect our environment
- Guide to the washer
- Before using for the first time
- 1. Prepare the laundry
- 2. Load the laundry
- 3. Select a program
- 4. Selecting program settings
- 5. Add detergent
- 6. Start the program - Program end
- Spin cycle
- Delay Start
- Program guide
- Changing the programme sequence
- Detergent
- Cleaning and care
- Frequently asked questions
- Problem solving guide
- A wash program cannot be started
- The following fault message appears in the display and the program has been canceled
- A message appears in the display at the end of the program
- General problems with the washer
- Poor wash results
- The drum door cannot be opened
- Opening the drum door during a power failure
- After sales service
- MIELE
- Installation
- Setting the language
Installation
48
If the holes are not covered,
there is a risk of injury.
To avoid the risk of injury the holes
for the shipping struts must be
covered after they have been
removed.
Fit the covers onto the holes.
Secure the shipping struts to the
back of the washing machine. Make
sure the top catch is located above
the holder.
The washing machine must not
be moved without the shipping struts
in place.
Store the shipping struts. They must
be refitted if the machine is to be
moved again (e.g. when moving
house).
Refitting the shipping struts
Refitting is carried out by reversing the
procedure.