Operating instructions for Washing machine W 3164 WSS Edition 111 To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. en - GB M.-Nr.
Caring for our environment Disposal of the packing material The packaging is designed to protect the machine from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Recycling the packaging reduces the use of raw materials in the manufacturing process and also reduces the amount of waste in landfill sites. Ensure that any plastic wrappings, bags etc.
Contents Caring for our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operating the washing machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Before using for the first time. . . . . . . . . . . .
Contents Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Cancelling a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Making changes to a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Adding or removing laundry after a programme has started . . . . .
Contents Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Installation surface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warning and Safety instructions This machine complies with current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time. They contain important information on its safety, use and maintenance. Keep these instructions in a safe place and ensure that new users are familiar with the content. Pass them on to any future owner.
Warning and Safety instructions Safety with children ~ Children under 8 years of age must be kept away from the machine unless they are constantly supervised. ~ Children 8 years and older may only use the machine unsupervised if they have been shown how to use it in a safe way and recognise and understand the consequences of incorrect operation. ~ Children must not be allowed to clean or maintain the machine unsupervised.
Warning and Safety instructions Technical safety ~ Before setting up the washing machine, check it for any externally visible damage. Do not install or use a damaged machine. ~ Before connecting the machine, ensure that the connection data on the data plate (fuse rating, voltage and frequency) match the mains electricity supply. If in any doubt, consult a qualified electrician. ~ The electrical safety of this washing machine can only be guaranteed when correctly earthed.
Warning and Safety instructions ~ Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele approved service technician, otherwise any subsequent damage will not be covered by the guarantee. ~ If the electrical connection cable is faulty it must only be replaced by a Miele approved service technician to protect the user from danger.
Warning and Safety instructions Correct use ~ The maximum load of dry laundry for this machine is 7 kg. See the "Programme chart" for the maximum recommended loads in individual programmes. ~ Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
Warning and Safety instructions ~ If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale it, only use proprietary non-corrosive descaling agents and strictly observe the instructions on the packaging. A special descaling agent is available to order from Miele (see "Optional accessories").
Warning and Safety instructions Accessories ~ Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, guarantee, performance and product liability claims will be invalidated. ~ A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
Operating the washing machine Control panel a Display The display shows the programme duration (time left). b Start button Starts the wash programme. c Additional option buttons Additional options can be added to the basic programme. Use the top button to select either Soak, Pre-wash, or Short. Use the lower button to select the Water plus option.
Before using for the first time Before using the machine for the first time, ensure that it is correctly installed and connected. See "Installation and connection". Also check that the drain filter is securely tightened to prevent the risk of water leaks during use. This washing machine has undergone a complete functional test at the factory and there will be some residual water in the drum from this process.
Washing environmentally and economically Energy and water consumption Detergent – Water consumption and energy usage are determined by the size of the load. To make the most out of your machine, load the maximum dry load for the programme you are using. – Do not exceed the amounts of detergent recommended by the manufacturer on the packaging. – When smaller amounts of laundry are washed, the automatic load recognition system will reduce the amount of water and energy used.
How to wash correctly Brief instructions The headings numbered A, B, C, . . . show the operating sequence and can be used as brief instructions. A Sort the laundry ,If you use a solvent-based cleaning agent (e.g. one containing benzene) to pre-treat a stain, make sure that any plastic parts (e.g. buttons) are protected, and that the cleaning agent is rinsed off before washing the garment in the machine. ,Do not use solvent-based cleaning agents in or on this machine.
How to wash correctly B Switch on the washing machine D Select a programme C Load the drum ^ Press the Door button to open the drum door. ^ Unfold the laundry and load loosely into the drum. Mixing both large and small items gives better wash results and also helps distribute the load evenly during spinning. The most efficient use of energy and water is achieved when a full load is washed. However, do not overload as this causes creases and reduces cleaning efficiency.
How to wash correctly E Select any additional option(s) F Select a spin speed Each press of the top button selects the additional options in the following order: Soak, Pre-wash or Short or no option. Use the lower button to select the Water plus option. ^ Press the Spin button repeatedly until the indicator light for the spin speed you want comes on. ^ Select the option(s) you want. Not all the additional options are suitable for use with every programme.
How to wash correctly G Add detergent It is important to dispense the correct amount, because . . . . . . too little detergent results in: – Laundry not getting properly clean and with time it may become grey and hard to the touch. – Greasy particles clinging to the laundry. – Limescale deposits on the heater elements. . . . too much results in: – Excessive foam which causes a low level of agitation and poor wash, rinse and spin results.
How to wash correctly H Start the programme ^ Press the flashing Start button. I Unload the drum 0 will appear in the display at the end of the programme. ^ Press the Door button to open the drum door. ^ Remove the laundry. Check that all items have been removed from the drum. Items left in the drum could discolour other items in the next wash or become discoloured themselves. ^ Check the folds in the door seal for any small articles, e.g. buttons, which might be lodged there.
Extras You can use the extra option buttons to augment the wash programmes. Short For light to normal soiling with no visible staining. The following extra options can be selected in addition to the programme: Only one of the following can be selected at a time: Short, Pre-wash or Soak. s plu ter Wa ak So h as -w Pre ort Sh This shortens the programme running time. Pre-wash For laundry with large amounts of dirt e.g. dust, sand.
Spinning Final spin speed Programme Rinse and interim spin rpm Cottons 1400 Minimum iron 1200 Delicates 400 Automatic 1200 Dark garments 1200 Shirts 600 Denim 900 Express 1400 Silks / 600 Woollens / 1200 Drain/Spin 1400 Separate rinse/Starch 1200 You can reduce the final spin speed. However, you cannot select a final spin speed higher than that shown in the chart above.
Programme chart Cottons 90°C / 30°C Max. load 7.0 kg Use for Cotton, linen or cotton mix fabric, e.g. table linen, towelling, underwear, T-shirts etc. Note Where particularly high levels of hygiene are required please select 90°C. r/s Cottons Max. load 7.0 kg Use for Normally soiled cotton garments Note – These settings are the most efficient in terms of energy and water consumption for washing cottons.
Programme chart Automatic cold to 40°C Max. load 3.5 kg Use for Mixed loads of garments suitable for the Cottons and Minimum iron programmes. Sort according to colour. Note The wash parameters (e.g. water level, wash rhythm and spin speed) are adjusted automatically in this programme to ensure the best possible care and wash result for each item. Dark garments 40°C Max. load 3.0 kg Use for Black and dark garments made from cotton or mixed fibre. Note Wash inside out.
Programme chart Woollens / cold to 40°C Max. load 2.0 kg Use for Machine-washable or hand-washable wool or wool blend fabrics. If the care label does not specify a temperature, wash using the cold setting. Note Reduce the spin speed for items which crease easily. Drain / Spin Notes – Drain only: Select No . (No spin). – Make sure you select the appropriate spin speed. Separate rinse/Starch Max. load 7.0 kg Use for – Rinsing hand-washed items.
Programme sequence Main wash Rinses Spinning Water level Wash rhythm Water level Rinses Interim spin Final spin Cottons d a ( 2-41)2) L L Minimum iron ( c e 2-33) L L Delicates e d e 3 Automatic ( abc Dark garments ( Shirts – L e 3) 2-3 L L b d 3-43) L L e c e 2 – L Denim ( c e 3 – L Express d b d 2-3 L L Silks / e f e 2 – L Woollens / e f e 2 L L Drain/Spin – – – – – L Separate rinse/Starch – – e 1 – L Please see
Programme sequence d = Low water level ( = Medium water level Special features in the programme sequences: e = High water level Anti-crease: a = Intensive rhythm b = Normal rhythm c = Gentle rhythm d = Sensitive rhythm e = Ultra sensitive rhythm f At the end of the programme, the drum continues to turn at intervals for up to 30 minutes to help prevent creasing. Exception: There is no anti-crease phase in the Woollens programme.
Garment care label symbols Washing The figure quoted in the bucket is the maximum temperature the garment can be washed at. The number of bars under the symbol indicates the level of agitation permitted.
Changing the programme sequence Cancelling a programme You can cancel a programme at any time after it has started. Making changes to a programme Turn the programme selector to Finish. After the start of a programme it is no longer possible to select a different programme. The water will drain away. The laundry can be unloaded when 0 appears in the display. Temperature Interrupting a programme ^ Switch the machine off with the _ button.
Changing the programme sequence Adding or removing laundry after a programme has started ^ Press the Door button in until the drum door springs open. ^ Add or remove items. ^ Close the door. The programme will continue automatically. Please note: Once a programme has started the machine cannot recognise any adjustment to the load.
Detergent The correct detergent All modern detergents produced for automatic washing machines are suitable. Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets are suitable for full loads, but note that it may be impractical to reduce tablets for smaller loads. Some tablets do not dissolve as rapidly as others, and may not be suitable for programmes with short durations.
Detergent Universal Detergent Detergent Specialist Proofing Fabric detergent for for detergent* agent** conditioner coloureds delicates Cottons X X – – – X Minimum iron X X – – – X Delicates X X X – – X X X – – – X X X X – – X X X – – – X X X X – – X X X – – – X Silks / – – – X – X Woollens / – – – X – X Separate rinse/ Starch – – – X – X Automatic Dark garments 1) Shirts Denim 1) Express 1) 1) Liquid detergent For programmes wit
Detergent The right amount to dispense will depend on the following: – The quantity of laundry. – The soiling level of the laundry. Lightly soiled No visible dirt or stains. Possibly slight body odour. Normally soiled Visibly dirty and/or just a few slight stains. Heavily soiled Visible dirt and stains and/or dried on soiling. – The water hardness level. Check with your local water supplier if you do not know the hardness level in your area.
Detergent Fabric conditioners and liquid starch Fabric conditioners make garments soft to handle and help prevent static cling when tumble drying. Starch stiffens and gives body to items of laundry, e.g. shirts, tablecloths and bed linen. Automatic dispensing of fabric conditioner or liquid starch to laundry at the end of a programme If starching frequently, the dispenser compartment and especially the siphon tube and fabric conditioner channel will need regular cleaning to remove any residual starch.
Cleaning and care ,Disconnect the machine from the mains electricity supply and withdraw the plug from the socket before cleaning the machine. ,The washing machine must not be hosed down. A range of Miele branded cleaning and conditioning agents is available to order from the Miele Spare Parts Department, or via the internet on www.miele-shop.com. External casing and control panel Extra cleaning Carry out a hot wash (60°C or above) with powder detergent approx.
Cleaning and care Cleaning the detergent dispenser drawer housing ^ Clean the siphon. 1. Remove the siphon from compartment § and rinse under hot running water. Clean the siphon tube in the same way. 2. Replace the siphon. If starching frequently, thoroughly clean the siphon and siphon tube regularly. A build-up of starch will cause them to get clogged. 36 ^ Use a bottle brush to remove detergent residues and limescale from the jets inside the detergent dispenser drawer housing.
Cleaning and care Cleaning the water inlet filters The washing machine has two filters to protect the inlet valves. These filters should be checked every six months or so, or more often if there are frequent interruptions to the water supply. To clean the filter in the water inlet valve: ^ Using pliers, carefully loosen the ribbed plastic nut on the inlet valve and unscrew. To clean the filter in the union in the open end of the inlet hose: ^ First turn off the stopcock.
Problem solving guide With the help of the following notes, minor faults in the performance of the machine, some of which may result from incorrect operation, can be put right without contacting the Service Department. ,Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous.
Problem solving guide The wash programme stops and a fault code appears in the display. Problem Possible cause The Check inlet/ The water outlet is drainage light flashes blocked. and F10 or F11 shows in the display. Remedy A Clean the drain filter and the drain pump as described in "Problem solving guide – Opening the drum door in the event of a blocked drain outlet and/or a power failure". The drain hose has been fixed too high. The maximum delivery head is 1 m. The water inlet is blocked.
Problem solving guide A fault code appears but the wash programme continues as normal. Problem Possible cause The fault code F63 Excessive foam has shows in the display. built up during washing. ~§~ shows in the display. Remedy A Use less detergent next time and follow the manufacturer's instructions on dosage given on the packaging. The position of the programme selector was altered after the start of the programme. Turn the programme selector back to the programme previously chosen.
Problem solving guide General problems Problem Possible cause Remedy The machine shakes during the spin cycle. The machine feet are not level. Level the machine (see "Installation and connection"). The laundry has not been spun properly and is still wet. The machine detected an imbalance during the final spin and reduced the spin speed automatically. Include both large and small items in the load as this will give better distribution.
Problem solving guide An unsatisfactory wash result Problem Possible cause Remedy Liquid detergent does not give the required result. Liquid detergents usually contain no bleaching agents. They do not remove fruit, coffee and tea stains. Grey, greasy particles cling to washed laundry. Insufficient amounts of – Use more detergent. detergent were used – Before washing the next load to break down the run a Cottons 90°C programme particles of grease in with powder detergent but heavily soiled laundry.
Problem solving guide The drum door does not open when you press the Door button Possible cause Remedy The washing machine is Insert the plug in the socket and switch on and / or not connected to the switch the machine on with the _ button. electricity supply and/or is not switched on. Power cut. Open the drum door as described in "Opening the drum door in the event of a blocked drain outlet and/or power failure". The door was not correctly engaged.
Problem solving guide Opening the drum door in the event of a blocked drain outlet and/or power failure ^ Switch the washing machine off. ,Caution: if laundry has been washed at a high temperature, water draining out of the machine will still be hot. Danger of scalding! There is a lever behind the detergent drawer fascia panel. Procedure for draining the machine ^ Remove the lever. ^ Place a suitable container under the access flap.
Problem solving guide Once the flow of water ceases: ,Make sure the drain filter is securely tightened. Otherwise there is a risk of water leakage during use. To avoid loss of detergent, pour approx. 2 litres of water into the detergent dispenser drawer after cleaning the drain filter. Excess water will be pumped out automatically before the next wash programme. Opening the drum door ^ Remove the drain filter completely. ^ Clean it thoroughly. ^ Remove any foreign objects (e.g. buttons, coins, etc.
After sales service In the event of any faults which you cannot remedy yourself, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your machine, both of which are shown on the data plate visible above the porthole glass when the door is open.
Installation and connection Front view a Inlet hose (tested to withstand pressure of at least 7,000 kPa) b Electricity supply cable c - f Flexible drain hose (with detachable elbow) g Control panel h Detergent dispenser drawer i Drum door j Access to drain filter, drain pump and emergency release k Handle recesses for moving the machine l Four height adjustable feet 47
Installation and connection Rear view a Protruding lid for holding when moving the machine e Transit bar covers b Electricity supply cable f Retaining clip for inlet hose and drain hose c Inlet hose (tested to withstand pressure of at least 7,000 kPa) g Retaining clips for transit bars when removed d Drain hose 48
Installation and connection Installation surface Installing the washing machine A concrete floor is the most suitable installation surface for a washing machine, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. To manoeuvre the machine out of its packing case to its installation site hold it by the edge of the lid where it protrudes to the rear of the washing machine as well as by the handle recesses at the front.
Installation and connection ^ Using the spanner supplied turn the left-hand transit bar 90°, then ^ Turn the right-hand transit bar 90°, then ^ withdraw the transit bar. ^ withdraw the transit bar.
Installation and connection ,To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed. ^ Secure the transit bars to the back of the washing machine. Make sure that holes b are fitted over retainers a. ,The washing machine must not ^ Fit the covers on to the two holes. Then plug the holes as shown with the caps. be moved without the transit bars in place. Store them as shown or keep them in a safe place for future use.
Installation and connection Levelling the machine The machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine. All four feet are screwed in when the machine is delivered. ^ Use a spirit level to check the machine is standing level.
Installation and connection Washer and Dryer stack The fitting of building-under kits* and stacking kits* must only be undertaken by qualified and competent persons, in accordance with the instructions supplied with the kit. A Miele tumble dryer can be stacked with the washing machine. A "WTV" stacking kit* is necessary.
Installation and connection The Miele water safety system The Miele water safety system protects the washing machine from water damage. The system consists of three main components: 1) the inlet hose 2) the electronic unit 3) the drain hose 1) Inlet hose The inlet hose is tested to withstand pressure of more than 7,000 kPa.
Installation and connection Connection to the water supply The machine should be connected to a mains water supply in accordance with local and national safety regulations. The German authorities do not require it to have a non-return valve as it has been designed to comply with DIN regulations. The machine is designed to operate with a flow pressure of between 100 kPa and 1,000 kPa. If it is higher than 1,000 kPa it is essential to fit a reducer valve.
Installation and connection Connection to the drainage system Please note: The machine drains via a drain pump with a delivery head of 1 metre*. The drain hose must not be kinked as this restricts drainage. The elbow at the end can be detached. If required, the drain hose can be extended to a length of 5 m. The necessary parts can purchased from the Miele Spare Parts Department or your Miele dealer. * For a delivery head of more than 1 m (up to a max. of 1.
Installation and connection Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK). The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained.
Consumption data Load Cottons Consumption data Energy Water in kWh in litres Duration Residual moisture 90°C 7.0 kg 2.20 51 2 h 09 min 52% r* 7.0 kg 1.10 51 2 h 14 min 52% r* 3.5 kg 0.89 38 1 h 58 min 52% s 7.0 kg 0.72 56 2 h 29 min 52% s* 3.5 kg 0.59 56 2 h 15 min 52% Minimum iron 40°C 3.0 kg 0.50 55 1 h 19 min 30% Delicates 30°C 2.0 kg 0.38 69 59 min Automatic 40°C 3.5 kg 1 h 13 min – Dark garments 40°C 3.0 kg 0.
Technical data Height 850 mm Width 595 mm Depth 580 mm Depth with door open 975 mm Height for building under 820 mm Width for building under 600 mm Depth for building under 600 mm Weight 101 kg Capacity 7 kg dry laundry Voltage see data plate Connected load see data plate Fuse rating see data plate / plug Consumption data see "Consumption data" Water flow pressure minimum 100 kPa (1 bar) Water flow pressure maximum 1000 kPa (10 bar) Inlet hose length 1.
Programmable functions Before you begin, ensure that: The programmable functions can be used to alter the machine's electronics to suit changing requirements. Programmable functions can be altered at any time. The programmable functions are accessed via the Start button and the programme selector. Water plus system This setting is used to specify one of three options for the Water plus button. P2: (Factory default) The water level is increased in the wash and rinse stages.
Programmable functions Gentle action Activating Gentle action reduces the drum action and is suitable for washing slightly soiled items more gently. It should be activated for garments with a single bar under the "bucket" in the care label and for articles which feel too hard after they have been dried. Gentle action can be activated for the Cottons and the Minimum iron programmes. The washing machine is delivered with the Gentle action setting deactivated.
Programmable functions Suds cooling When this is activated, additional water flows into the drum at the end of the main wash to cool the suds down. Hot suds can damage plastic drainage pipes. Suds cooling takes place when the Cottons 90°C programme is selected. Suds cooling should be activated: – to prevent the danger of scalding if the drain hose is hooked over the edge of a sink or basin. – where the drainage pipes do not comply with DIN 1986. The machine is delivered with Suds cooling deactivated.
Programmable functions Memory function If an extra option is selected for a programme, and / or the spin speed is altered, the machine stores these changes in memory at the start of a programme. When that particular programme is chosen again, the washing machine will display the extra option and / or spin speed which have been stored for that programme in the memory. A Press the Start button and keep it pressed in whilst carrying out steps B-C. B Switch the machine on with the _ button.
Programmable functions Soak duration A length of time of between 30 minutes and 2 hours can be programmed in 30 minute increments for the soak process. A Press the Start button and keep it pressed in whilst carrying out steps B-C. B Switch the machine on with the _ button. If the Soak option is pressed, the selected soak time will be carried out for the period selected before the wash programme is run. C Wait until the indicator light for the Start button lights up constantly . . .
Optional accessories Miele washing machines offer perfect care for your laundry and feature a wide range of special programmes designed to suit the fabric being washed. Miele have also developed a range of specialist CareCollection detergents and conditioning products as well as descaling agent and water softening tablets to offer you a complete package for looking after your machine and caring for your laundry. The Miele CareCollection detergents and conditioning products are listed below.
Optional accessories "UltraWhite" detergent Liquid detergent "For Delicates" This multi-purpose powder detergent has excellent stain removal properties and is suitable for white and light coloured laundry as well as heavily soiled coloured items. This liquid detergent is ideal for the gentle treatment of delicate fabrics, such as wool and silk. Its special formulation cleans effectively at temperatures as low as 20°C, while protecting the colour of your delicate garments.
Alteration rights reserved/1013/W 3164 WSS Edition 111 M.-Nr.