Operating instructions for Washing machine W 5780 To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time. en - GB M.-Nr.
Caring for our environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and should be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children.
Contents Caring for our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Operating the washing machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Before using for the first time. . . . . . . . . . . .
Contents Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 The correct detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Screwing out and adjusting the feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Building under a continuous worktop/in a kitchen run . . . . . . . . . . . . . . . . . . . 55 Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 The Miele water protection system . . . . . . . . . . . . . . . . . . . . . .
Warning and Safety instructions This washing machine conforms to current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the washing machine, please read these instructions carefully before using it for the first time. They contain important information on its installation, safety, use and maintenance. Keep these instructions in a safe place and ensure that new users are familiar with the content.
Warning and Safety instructions Safety with children ~ Children 8 years and older may use, clean or maintain the washing machine without supervision only if they have been shown how to do so in a safe way and understand the hazards involved. ~ Children under 8 years of age must be kept away from the machine unless they are constantly supervised. ~ The washing machine is not a toy! To prevent the risk of injury, do not allow children to play with it or near it, or to play with the controls.
Warning and Safety instructions Technical safety ~ Before setting up the washing machine, check it for any externally visible damage. Do not install or use a damaged washing machine. ~ Before connecting the washing machine, ensure that the connection data on the data plate (voltage and frequency) match the mains electricity supply. If in any doubt, consult a qualified electrician. ~ The electrical safety of this washing machine can only be guaranteed when correctly earthed.
Warning and Safety instructions ~ Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be undertaken by a Miele approved service technician. ~ If the connection cable is faulty it must only be replaced by a Miele approved service technician to protect the user from danger. ~ The machine must be isolated from the electricity supply in the event of a fault and during installation, maintenance and repair work.
Warning and Safety instructions Correct use ~ Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point. ~ Before using the washing machine for the first time, check that the transit bars at the rear of the machine have been removed (see section on "Installation and connection").
Warning and Safety instructions ~ If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale the machine only use proprietary non-corrosive descaling agents and strictly observe the instructions on the packaging. A special descaling agent is available to order from the Miele Spare Parts Department or via the internet on www.miele-shop.com.
Warning and Safety instructions Accessories ~ Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, guarantee, performance and product liability claims will be invalidated. Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions.
Operating the washing machine Control panel a Extra option buttons Various extra options can be added to the washing programmes. b Display See the following page for more information. c Delay start button For delaying the start time of a programme. d Temperature button For selecting a temperature. e Spin speed button For selecting the final spin speed or e (Rinse hold) or No . (Without spin).
Operating the washing machine Delay start The delay start time selected will appear in the display. After the machine has started, the delay start time counts down. If the delay start time is more than 10 hours, it will count down by the hour. If it is less than 9 hours and 59 minutes it will count down minute by minute. The following are selected via the display: Once the delay start time has elapsed, the programme will begin and the programme sequence will appear in the display.
Before using for the first time Setting the language Before using the machine for the first time ensure that it is correctly installed and connected. See "Installation and connection". Also check that the drain filter is securely tightened to prevent the risk of water leaks during use. This washing machine has undergone a thorough functional test in the factory and there will be some residual water in the drum from this process.
Washing environmentally and economically Energy and water consumption Detergent – Water consumption and energy usage are determined by the size of the load. To make the most out of your machine, load the maximum dry load for the programme you are using. – Do not exceed the amounts of detergent recommended by the manufacturer on the packaging. – When smaller amounts of laundry are washed, the automatic load recognition system will reduce the amount of water, time and energy used.
How to wash correctly Brief instructions The headings numbered A, B, C, . . . show the operating sequence and can be used as brief instructions. A Sort the laundry ,If you use a solvent-based cleaning agent (e.g. one containing benzene) to pre-treat a stain, make sure that any plastic parts (e.g. buttons) are protected, and that the cleaning agent is rinsed off before washing the garment in the machine. ,Do not use solvent-based cleaning agents in or on this machine.
How to wash correctly B Switch on the washing machine D Select a programme C Load the drum ^ Press the Door button to open the drum door. ^ Unfold the laundry and load loosely into the drum. Mixing both large and small items gives better wash results and also helps distribute the load evenly during spinning. The most efficient use of energy and water is achieved when a full load is washed. However, do not overload as this causes creases and reduces cleaning efficiency.
How to wash correctly F Select an extra option(s) Pre-wash + The Pre-wash + button is used for activating the Pre-wash option on its own as well as a Pre-wash with an additonal soak time of one or two hours. Press the button: x 1 = Pre-wash x 2 = Pre-wash + 1 h soak x 3 = Pre-wash + 2 h soak x 4 = No options selected ^ Select an extra option by pressing the appropriate button. The relevant indicator light will come on to show which extra option has been selected.
How to wash correctly G Select Delay start (if required) The start of a programme can be delayed from 30 minutes up to 24 hours, allowing you to make use of night-time economy electricity rates, for example. See "Delay start" for more information. H Add detergent It is important to dispense the correct amount, because... . . . . . too little detergent results in: – Laundry not getting properly clean and with time it may become grey and hard to the touch.
How to wash correctly I Start the programme ^ Press the flashing Start/Stop button. If a Delay start time has been selected, then this will count down in the display. At the end of the Delay start time or immediately after the programme has started (if a Delay start time has not been selected) the programme sequence will appear in the display. The machine lets you know which section of the programme has been reached. Check that all items have been removed from the drum.
Spinning Final spin speed To omit the final spin (Rinse hold) Proofing 1000 Express 20 1400 ^ Select the Rinse hold (e) setting using the Spin speed button. The laundry will not be spun and will remain suspended in the final rinse water. This reduces creasing if the laundry is not going to be removed from the drum immediately after the end of the programme.
Delay start With Delay start you can choose when you want the programme to end. The start of a programme can be delayed from 30 minutes up to a maximum of 24 hours, allowing you to make use of night-time economy electricity rates, for example. To alter Delay start To select Delay start ^ Press the Delay start button until 24 h is showing in the display. Then press the Delay start button again briefly to cancel delay start. ^ Press the Delay start button.
Programme chart Cottons 9876* cold to 90°C Max. load 7.0 kg Use for Cotton, linen or cotton mix fabrics, e.g. table linen, towelling, underwear, T-shirts etc. Note The 60°/40°C programmes differ from the Eco60/Eco40 programmes as follows: – Shorter programme duration – Longer temperature holding times – Higher energy consumption Where particularly high levels of hygiene are required please select a temperature of 60°C or higher. Eco60/Eco40 Cottons Max. load 7.
Programme chart Woollens /ac* cold to 40°C Max. load 2.0 kg Use for Machine-washable or hand-washable wool or wool blend fabrics. If the care label does not specify a temperature, wash using the cold setting. Note Reduce the spin speed for items which crease easily. Proofing 40°C Max. load 2.5 kg Use for Treating microfibre fabrics, skiwear, and table linen made from mainly synthetic fibres to provide a water and stain resistant finish.
Programme chart Shirts cold to 60°C Notes – Pre-treat collars and cuffs if necessary. – Wash silk shirts and blouses in the Delicates programme. Intensive plus cold to 90°C Max. load 2.0 kg Max. load 7.0 kg Use for Mixed loads of heavily soiled garments suitable for the Cottons and Minimum iron programmes. Sort according to colour. Notes – The pre-wash additional function will be activated automatically. – The duration of the main wash will be longer. Spin Notes – To drain only: Select No .
Extras The following extra options can be selected in addition to the programme: iet qu ak tr a So Ex h+ as -w P re h as -w P re s plu ter Wa ort Sh Cottons X X X X X Minimum iron X X X X X Delicates X X X X Woollens / X Proofing Express 20 X X 1) X X Automatic plus X Dark garments / Denim X Shirts X Intensive plus X X X X X X X X X2) X Spin Separate rinse/Starch X X X1) = The extra option is activated automatically as part of the programme X2) = The extra optio
Programme sequence Main wash Rinses Spinning Water level Wash rhythm Water level Rinses Interim spin Final spin Cottons d a ( 2-41)2) L L Minimum iron ( c e 2-33) L L Delicates e d e 3 – L Woollens / e f e 2 L L Proofing ( d – – – L Express 20 d b d 1-33) L L Automatic plus ( abc e 3) 2-3 L L Dark garments / Denim ( b d 3 – L Shirts e c e 2 – L Intensive plus ( a ( 2-41)2) L L Spin – – – – – L Separate rinse/Starch – –
Programme sequence d = Low water level ( = Medium water level Special features in the programme sequences: e = High water level Anti-crease: a = Intensive rhythm b = Normal rhythm c = Gentle rhythm d = Sensitive rhythm e = Ultra sensitive rhythm f At the end of the programme, the drum continues to turn at intervals for up to 30 minutes to help prevent creasing. Exception: There is no anti-crease phase in the Woollens programme.
Garment care label symbols Washing The figure quoted in the bucket is the maximum temperature the garment can be washed at. The number of bars under the symbol indicates the level of agitation permitted.
Changing the programme sequence Cancelling a programme You can cancel a programme at any time after it has started. ^ Press the Start/Stop button. Making changes to a programme After the start of a programme it is no longer possible to select a different programme. Cancel programme ^ Press the flashing Start/Stop button again. The suds will be pumped away. If you want to remove the laundry: ^ Press the Door button. If you want to select a different programme: ^ Switch the machine off with the K button.
Changing the programme sequence Adding or removing laundry after a programme has started ^ Press the Door button to open the drum door. ^ Add or remove items. Safety lock The safety lock prevents the machine from being opened or the programme cancelled during a wash programme. ^ Close the drum door. To activate the safety lock The programme will continue automatically. ^ Press and hold in the Start/Stop button after the programme has started.
Detergent The correct detergent All modern detergents produced for automatic washing machines are suitable. Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets are suitable for full loads, but note that it may be impractical to reduce tablets for smaller loads. Some tablets do not dissolve as rapidly as others, and may not be suitable for programmes with short durations.
Detergent Universal Detergent Detergent Specialist Proofing Fabric detergent for for detergent* agent** conditioner coloureds delicates Cottons X X – – – X Minimum iron X X – – – X Delicates X X X – – X Woollens / – – – X – X Proofing – – – – X – X X – – – X Automatic plus X X – – – X Dark garments / Denim1) X X X – – X Shirts X X – – – X Intensive plus X X – – – X Separate rinse/ Starch – – – X – X Express 20 1) 1) Liquid deterg
Detergent The right amount to dispense will depend on the following: – The quantity of laundry – The soiling level of the laundry Lightly soiled No visible dirt or stains. Possibly slight body odour. Normally soiled Visibly dirty and/or just a few slight stains. Heavily soiled Visible dirt and stains and/or dried on soiling. – The water hardness level. Check with your local water supplier if you do not know the hardness level in your area.
Detergent Fabric conditioners and liquid starch Starch Stiffens and gives body to items of laundry, e.g. shirts, tablecloths and bed linen. Fabric conditioners Make garments soft to handle and help prevent static cling when tumble drying. Automatic dispensing of fabric conditioner or liquid starch to laundry at the end of a programme If starching frequently, thoroughly clean the dispenser compartment, especially the siphon tube and fabric conditioner channel, regularly.
Cleaning and care A range of Miele branded cleaning and conditioning products is available to order from the Miele Spare Parts Department or via the internet at www.miele-shop.com Cleaning the drum (Hygiene info) Washing at low temperatures and/or using liquid detergent can cause bacteria and unpleasant smells to build up in the machine.
Cleaning and care ^ Clean the siphon. 1. Remove the siphon from compartment § and rinse under hot running water. Clean the siphon tube in the same way. 2. Replace the siphon. If starching frequently, thoroughly clean the siphon and siphon tube regularly. A build-up of starch will cause them to get clogged. 38 Cleaning the detergent dispenser drawer housing ^ Use a bottle brush to remove detergent residues and limescale from the jets inside the detergent dispenser drawer housing.
Cleaning and care Cleaning the water inlet filters The washing machine has two filters to protect the inlet valves. These filters should be checked every six months or so, or more often if there are frequent interruptions to the water supply. To clean the filter in the water inlet valve: ^ Using pliers, carefully loosen the ribbed plastic nut on the inlet valve and unscrew. To clean the filter in the union in the open end of the inlet hose: ^ First turn off the stopcock.
Problem solving guide With the help of the following notes, minor faults in the performance of the machine, some of which may result from incorrect operation, can be put right without contacting the Service Department. ,Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations. Repairs and other work by unqualified persons could be dangerous.
Problem solving guide The following fault messages appear in the display and the programme stops Fault message Possible cause Remedy A ; Drain fault – The water outlet is blocked or restricted. – The drain hose has been fixed too high. ; Water inlet fault The water inlet is blocked Check whether or restricted. – the stopcock is opened properly. – the inlet hose is kinked. – the water pressure is too low. ; Waterproof fault The water protection system has reacted. – Close the stopcock.
Problem solving guide The following advice appears in the display Fault message Possible cause Remedy Chk detergent Excessive foam has built up during washing. Use less detergent next time and follow the manufacturer's instructions on dosage given on the packaging. Hygiene info A programme using a temperature above 60°C has not been run for a long time. In order to prevent bacteria and unpleasant smells building up in the machine, run a Cottons 75°C programme using powder detergent.
Problem solving guide General problems Problem The machine shakes during the spin cycle. Possible cause The machine feet are not level. Remedy Level the machine (see "Installation and connection"). The laundry has not been The machine detected an spun properly and is still imbalance during the final wet. spin and reduced the spin speed automatically. Include both large and small items in the load as this will give better distribution. The laundry has not spun The spin speed selected satisfactorily.
Problem solving guide An unsatisfactory wash result Problem Possible cause Remedy Liquid detergent does not give the required result. Liquid detergents usually – Use a general purpose contain no bleaching detergent containing a agents. They do not bleaching agent. remove fruit, coffee and – Add stain removers into tea stains. compartment j of the detergent dispenser drawer and liquid detergent into a dispenser ball. – Never put stain removers and liquid detergent together in the dispenser drawer.
Problem solving guide The drum door does not open when you press the Door button Possible cause Remedy The machine is not Insert the plug in the socket and switch on and/or connected to the switch the machine on with the K button. electricity supply and/or is not switched on. The safety lock has been activated. Deactivate the safety lock as described in "Changing the programme sequence - Safety lock". Access via a code has been activated.
Problem solving guide Opening the drum door in the event of a blocked drain outlet and/or power failure ^ Switch the washing machine off. There is a lever behind the detergent drawer fascia panel. ,Caution: if laundry has been washed at a high temperature, water draining out of the machine will still be hot. Danger of scalding! Procedure for draining the machine Be careful not to release too much water at once.
Problem solving guide Once the flow of water ceases: ,Make sure the drain filter is securely tightened. Otherwise there is a risk of water leakage during use. To avoid loss of detergent, pour approx. 2 litres of water into the detergent dispenser drawer after cleaning the drain filter. Excess water will be pumped out automatically before the next wash programme. Opening the drum door ^ Remove the drain filter completely. ^ Clean it thoroughly. ^ Remove any foreign objects (e.g. buttons, coins, etc.
After sales service In the event of any faults which you cannot remedy yourself, please contact: – your Miele Dealer or – Miele (see back cover for contact details). When contacting your Dealer or Miele, please quote the model and serial number of your machine, both of which are shown on the data plate visible above the porthole glass when the door is open.
Installation and connection Front view a Inlet hose (tested to withstand pressure of at least 7,000 kPa) b Electricity supply cable c - f Flexible drain hose (with detachable swivel elbow) g Control panel h Detergent dispenser drawer i Drum door j Access to drain filter, drain pump and emergency release k Handle recesses for moving the machine l Four height adjustable feet 49
Installation and connection Rear view a Protruding lid for holding when moving the machine e Transport clip for inlet and drain hoses b Electricity supply cable f Safety cap for transit bars c Inlet hose (tested to withstand pressure of at least 7,000 kPa) g Transport clip for inlet and drain hoses and for storing transit bars when not in use.
Installation and connection Installation surface A concrete floor is the most suitable installation surface for a washing machine, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note: ^ The machine must be level and securely positioned. ^ To avoid vibrations during spinning, the machine should not be installed on soft floor coverings.
Installation and connection ^ Using the spanner supplied, turn the left-hand transit bar 90°, then ^ Turn the right-hand transit bar 90°, then ^ withdraw the transit bar. ^ withdraw the transit bar.
Installation and connection ,To avoid the risk of injury the holes for the transit bars must be covered after the transit bars have been removed. ^ Secure the transit bars to the back of the washing machine. Make sure that the top catch is located above the holder. ^ Plug the holes with the plastic caps as illustrated. ,The machine must not be moved without the transit bars in place. Store them as shown or keep them in a safe place for future use.
Installation and connection Levelling the machine The machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine. All four feet are screwed in when the machine is delivered. ^ Use a spirit level to check the machine is standing level.
Installation and connection Washer and Dryer stack The fitting of building-under kits* and stacking kits* must only be undertaken by qualified and competent persons, in accordance with the instructions supplied with the kit. A Miele tumble dryer can be stacked with the washing machine. A "WTV" stacking kit* is necessary.
Installation and connection The Miele water protection system The Miele water protection system protects the washing machine from water damage. The system consists of three main components: 1) the inlet hose 2) the electronic unit and the washing machine housing 3) the drain hose 1) Inlet hose The inlet hose is tested to withstand pressure of more than 7,000 kPa. 2) Electronic unit and washing machine housing – Sump Any leaking water is collected in a sump in the base of the machine.
Installation and connection Connection to the water supply The machine should be connected to a mains water supply in accordance with local and national safety regulations. The German authorities do not require it to have a non-return valve as the washing machine has been designed to comply with DIN regulations. The machine is designed to operate with a flow pressure of between 100 kPa and 1,000 kPa. If it is higher than 1,000 kPa it is essential to fit a pressure reducing valve.
Installation and connection Connection to the drainage system Please note: The machine drains via a drain pump with a delivery head of 1 metre*. The drain hose must not be kinked as this restricts drainage. The swivel elbow at the end of the hose can be turned in either direction, or can be detached if required, with a sharp twist and pull. If required, the drain hose can be extended to a length of 5 m. The necessary parts can purchased from the Miele Spare Parts Department or your Miele dealer.
Installation and connection Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK). The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained.
Consumption data Load Cottons Energy Water in kWh in litres Duration 90°C 7.0 kg 2.20 52 2 h 29 min 60°C 7.0 kg 1.33 52 1 h 59 min 60°C 3.5 kg 1.00 45 1 h 59 min Eco60* 7.0 kg 0.82 52 2 h 59 min 60 Minimum iron Consumption data Eco * 3.5 kg 0.82 45 2 h 59 min 40°C 7.0 kg 0.84 67 2 h 29 min 40°C 3.5 kg 0.73 45 2 h 29 min Eco40 7.0 kg 0.70 52 2 h 59 min Eco40* 3.5 kg 0.58 45 2 h 59 min 40°C 3.5 kg 0.56 50 1 h 52 min Delicates 30°C 2.0 kg 0.
Technical data Height 850 mm Width 595 mm Depth 615 mm Depth with door open 975 mm Height for building under 820 mm Width for building under 600 mm Depth for building under 650 mm Weight 98 kg Capacity 7 kg dry laundry Voltage see data plate Connected load see data plate Fuse rating see data plate Consumption data see "Consumption data" Minimum water flow pressure 100 kPa (1 bar) Maximum water flow pressure 1000 kPa (10 bar) Inlet hose length 1.60 m Drain hose length 1.
Programmable functions To select a programmable function The programmable functions are used to alter the machine's electronics to suit changing requirements. Programmable functions can be altered at any time. To access programmable functions The programmable functions are accessed via the Start/Stop button and the programme selector. Before you begin, first ensure that: – The washing machine is switched off. – The machine door is closed properly.
Programmable functions Water plus This programmable function is used to select the water intake setting for the Water plus extra option. There are three different options: Water + (the machine is delivered with this option selected) The water level is increased in the wash and rinse stages. Extra rinse An extra rinse is introduced. Water+ & Extra rinse The water intake is increased in the wash and rinse stages and an additional rinse is also introduced.
Programmable functions Code A code can be used to lock the electronics on the washing machine to prevent it being used without your knowledge. When the code has been activated, you have to enter a code after switching the washing machine on. Otherwise the washing machine cannot be operated. Code ... 1 2 5 ^ Press the Start/Stop button. The following will appear in the display: Code activated Once the machine is switched off, it can only be used again if the code is entered.
Programmable functions Temperature unit You can chose for the temperature to be displayed in °C/Celsius or °F/Fahrenheit. The machine is delivered with °C/Celsius as the default setting. Keypad tone An audible tone sounds each time a button is pressed. The machine is delivered with the keypad tone deactivated. Brightness Buzzer When the buzzer function has been activated, an audible tone sounds at the end of a programme or when Rinse hold is reached.
Programmable functions Standby display To save energy, the display goes out and the indicator light for the Start/ Stop button will start flashing slowly. The display will always go out, – if a programme is not selected within 10 minutes of the machine being switched on. – 10 minutes after the end of a programme. Pressing one of the buttons switches the display back on again.
Optional accessories Miele washing machines offer perfect care for your laundry and feature a wide range of special programmes designed to suit the fabric being washed. Miele have also developed a range of specialist CareCollection detergents and conditioning products to offer you a complete package for cleaning and caring for your laundry. The Miele CareCollection detergents and conditioning products are listed below.
Optional accessories "UltraWhite" detergent Liquid detergent "For Delicates" This multi-purpose powder detergent has excellent stain removal properties and is suitable for white and light coloured laundry as well as heavily soiled coloured items. This liquid detergent is ideal for the gentle treatment of delicate fabrics, such as wool and silk. Its special formulation cleans effectively at temperatures as low as 20°C, while protecting the colour of your delicate garments.
Alteration rights reserved/1212/W 5780 M.-Nr.