User's Manual
Table Of Contents
- Con tents
- Guide to the ma chine 3
- Im por tant safety in struc tions 5
- Prep a ra tion for use
- Op er ating In struc tions
- Pre paring the Laun dry 8
- End of Program 10
- Changing the program se quence 11
- Adding de ter gent 12
- Adding fab ric soft ener or starch 13
- Program se lec tion 14
- Program se quence 16
- Tex tile care sym bols 18
- Ad di tional op tions 19
- De lay start/Time re main ing in di ca tor 20
- USER MAIN TE NANCE In struc tions
- Prob lem solv ing guide 25
- Af ter sales ser vi ce 30
- IN STAL LA TION IN STRUC TIONS
- Plumbing Con nec tions 36
- Elec tri cal con nec tion 37
- Pro gram ma ble func tions 38
- Tech ni cal data 43
WOOLENS Starch Spin Fine rinse
– ß ––
ß –––
––––
––––
2––2
––––
–––
max. 1200 max. 1200 max. 1200 max. 900
(2),
ßß– ß
– ß ––
Woolens normal – –
low
low
low
–
–
–
–
high
38 min 18 min 7 min 14 min
Graduated spin:
The speed is gradually increased, until the final spin speed is reached.
Final spin:
The maximum spin speed is held constant for a fixed period of time.
In the program PERMANENT PRESS, WOOLENS and Fine rinse the spin speed is automatically limited
to 900 rpm and in the FINE/DELICATES program to 600 rpm, even if the selector has been set to a
higher speed. A lower speed can also be selected.
Woolens:
Wool is susceptible to damage when it is wet. Agitation times during this program are shorter, and the
drum rotation is slower.
„Without final spin“:
At the end of the final rinse the wash remains suspended in water if the SPIN SPEED SETTING is set to
„Without final spin“. This helps to reduce creasing if the laundry will not be removed immediately upon
completion of the cycle.
Program sequence
17