User's Manual
Table Of Contents
- Con tents
- Guide to the ma chine 3
- Im por tant safety in struc tions 5
- Prep a ra tion for use
- Op er ating In struc tions
- Pre paring the Laun dry 8
- End of Program 10
- Changing the program se quence 11
- Adding de ter gent 12
- Adding fab ric soft ener or starch 13
- Program se lec tion 14
- Program se quence 16
- Tex tile care sym bols 18
- Ad di tional op tions 19
- De lay start/Time re main ing in di ca tor 20
- USER MAIN TE NANCE In struc tions
- Prob lem solv ing guide 25
- Af ter sales ser vi ce 30
- IN STAL LA TION IN STRUC TIONS
- Plumbing Con nec tions 36
- Elec tri cal con nec tion 37
- Pro gram ma ble func tions 38
- Tech ni cal data 43
Opening the drum door during
a power failure
To prevent water from spilling on to
the floor, make certain the machine
is drained before opening the door.
^
Turn off the washing machine.
^
Open the lint trap door and drain any
water as described in the Cleaning
and care section.
^
Pull down the ring in the upper right
corner of the access area, and the
door will open.
Never reach into a rotating drum! Al
-
ways make sure the drum is station
-
ary before reaching in to remove
laundry. Reaching into a moving
drum is extremely dangerous.
To check water pressure
^
Place a bucket under the water sup
-
ply valve.
^
Turn on the valve.
If 1 gallon (3.8 l) of water flows into the
bucket in 15 seconds the water pres
-
sure is adequate.
Electricity
–
If there is any doubt about the electri
-
cal supply or connection, consult a
qualified electrician.
Problem solving guide
29