Operating instructions for washing machines To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Contents Warning and Safety instructions ..................................................................... 5 Operating the washing machine ...................................................................... 12 Control panel ....................................................................................................... 12 How the sensor controls work ....................................................................... 13 Caring for the environment .........................................
Contents Detergent ........................................................................................................... The correct detergent.......................................................................................... Water softeners ................................................................................................... Dispensing aids ................................................................................................... Fabric conditioner and liquid starch ....
Contents The water protection system............................................................................... Connection to the water supply .......................................................................... Water drainage .................................................................................................... Electrical connection .......................................................................................... 64 64 66 67 Consumption data ..............................
Warning and Safety instructions This washing machine complies with all current local and national safety requirements. However, inappropriate use can lead to personal injury and damage to property. Read the operating instructions carefully before using the washing machine. They contain important information on safety, installation, use and maintenance. This prevents both personal injury and damage to the washing machine.
Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the washing machine unless they are constantly supervised. Children 8 years and older may only use the washing machine unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation. Children must not be allowed to clean or maintain the washing machine unsupervised.
Warning and Safety instructions Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronised with the mains power supply (e.g. island networks, back-up systems) is possible. A prerequisite for operation is that the power supply system complies with the specifications of EN 50160 or an equivalent standard.
Warning and Safety instructions Unauthorised repairs could result in unforeseen dangers for the user, for which the manufacturer cannot accept liability. Repairs should only be undertaken by a Miele authorised service technician, otherwise any subsequent damage will not be covered by the warranty. While the washing machine is under warranty, repairs should only be undertaken by a Miele authorised service technician. Otherwise the warranty will be invalidated.
Warning and Safety instructions Correct use Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point. Before using the machine for the first time, check that the transit bars at the rear of the machine have been removed (see “Installation - Removing the transit bars”).
Warning and Safety instructions If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale it, only use a proprietary natural citric acid based descaling agent. Miele recommends using Miele descaling agent which is available to order online at www.miele.co.uk or from Miele. Strictly observe the instructions on the packaging.
Warning and Safety instructions Accessories and spare parts Only use original Miele accessories. If other parts are used, warranty, performance and product liability claims will be invalidated. A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
Operating the washing machine Control panel a Sensor control (temperature) for selecting the temperature b Sensor control (spin speed) for selecting the spin speed c Sensor control (extra options) for selecting the extra options d Sensor control (CapDosing) for activating detergent dispensing via a capsule e Optical interface This is used by the Service department as a transmission point. f Sensor control (Delay start) for activating the Delay start function.
Operating the washing machine i Indicator lights lights up if there are faults affecting the water inlet and drainage lights up if excess detergent was used lights up as a reminder about hygiene information The Add laundry function cannot be selected. How the sensor controls work The sensor controls control the values located above them. The , , , , and sensor controls react to fingertip contact. When a programme is selected, values are pre-set for the and sensor controls.
Caring for the environment Disposal of the packing material Disposing of your old appliance The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electrical and electronic appliances often contain valuable materials. They also contain specific materials, compounds and components, which were essential for their correct function and safety.
Before using for the first time Damage resulting from incorrect installation and connection. Installing and connecting the washing machine incorrectly will cause serious property damage. See “Installation”. Remove the drain hose elbow from the drum An elbow piece for the drain hose is stored in the drum. Removing the open spanner Reach under the door grip and pull the door open. Remove the elbow piece.
Before using for the first time Removing the protective foil and stickers Opening the door at the end of the programme Remove: The door remains locked during the anti-crease phase. The indicators light up for the first 15 minutes. - Any protective film from the door - Any stickers from the front and the lid Please do not remove any labels (e.g. the data plate) which are visible when you open the door.
Washing environmentally and economically Energy and water consumption - To get the most out of your machine, load the maximum dry load size for the wash programme you are using. This will keep the energy and water consumption to a minimum in relation to the size of the load. - Programmes that are more efficient with regard to energy and water consumption generally have a longer running time.
1. Prepare the laundry Tip: Stains (e.g. blood, egg, coffee, tea) can be pre-treated using some handy tricks which can be found in the Miele guide to laundry care. Damage due to solvent-based Empty all pockets. Damage due to foreign objects. Nails, coins, paper clips, and so on can cause damage to garments and components in the machine. Check the laundry before washing and remove any foreign objects. Sort the laundry Sort the laundry by colour and by care label.
2. Load the washing machine Open the door Close the door Reach under the door grip and pull the door open. Make sure that no items are caught between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry. The most efficient use of energy and water is achieved when a full load is washed. However, do not overload as this reduces cleaning efficiency and causes creases. Unfold the laundry and load loosely into the drum.
3. Select a programme Programme selection The washing machine is switched on by turning the programme selector to a wash programme. Selecting a temperature and spin speed The wash programme’s pre-set temperature and spin speed light up brightly. The temperatures reached inside the washing machine might not be the same as the temperatures selected. Perfect wash results are achieved through a combination of energy use and wash duration. Turn the programme selector to the required programme.
3. Select a programme Selecting extra options In some programmes, you can combine 2 extra options. In other programmes, you can only select 1 extra option or there are no available extra options. Touch the sensor control: - Once: the Short extra option is selected and lights up. - 2 times: the Water + extra option is selected and lights up. - 3 times: the Soak extra option is selected and lights up. - 4 times: the Short and Water + extra options are selected and light up.
4. Add detergent Detergent dispenser drawer Adding fabric conditioner Any detergent suitable for automatic front loading washing machines can be used. Please observe the instructions for use and dosage on the detergent packaging. Adding detergent Add fabric conditioner or liquid starch to the compartment. Do not exceed the maximum level mark. Pull out the detergent drawer and add detergent to the compartments.
4. Add detergent Tips on dosing Adjust the detergent dosage to the level of soiling of the laundry and the size of the load. Reduce the amount of detergent with smaller loads (e.g. reduce the amount of detergent by ⅓ when washing a half load). Too little detergent: - Results in laundry not being cleaned properly and may cause it to become grey and hard to the touch over time. - Can lead to a build-up of mould in the washing machine.
4. Add detergent CapDosing Inserting a capsule Three different types of capsule are available: Open the detergent dispenser drawer. = Fabric care (e.g. fabric conditioner, proofing agent) = Additives (e.g. detergent enhancer) = Detergent (for the main wash only) Each capsule contains the correct amount for one wash cycle. Caps are available to order from Miele or from the Miele online shop (see the end of this booklet for contact details). Open the lid of the / compartment.
4. Add detergent The wash programme will dispense the contents of the capsule at the correct time. Water intake to the compartment is solely via the capsule. Do not add any additional fabric conditioner to the compartment. Remove the empty capsule at the end of the programme. Close the lid and press it firmly shut. For technical reasons a small amount of water will remain in the capsule. Close the detergent dispenser drawer.
5. Start the programme Starting a programme Adding laundry during a programme sequence (AddLoad) Laundry can be added or removed at any time, provided that the symbol is not illuminated in the display. Touch the sensor control. Touch the sensor control. Rotating bars ... ... are shown on the time display. The door will lock and the programme will start. If the word appears on the time display, the door can be opened.
6. End of programme Opening the door and removing the laundry The door remains locked during the anti-crease phase. The indicators light up for the first 15 minutes. Items left in the drum could discolour other items in the next wash or become discoloured themselves. Remove all items from the drum. appears on the time display. Turn the programme selector to the position. The indicator light will go out. The door will unlock.
Spinning Final spin speed in wash programmes When a programme is selected, the sensor control for the optimum spin speed for that programme will be brightly lit up in the control field. A faster spin speed can be selected for certain wash programmes. The highest selectable spin speed is indicated in the table. Programme rpm Selecting Rinse hold (final spin) Touch the sensor control repeatedly until the indicator (Rinse hold) lights up.
Delay start With Delay start you can choose when you want the programme to start. You can delay the start of the programme by 30 minutes up to a maximum of 24 hours, allowing you to make use of night-time economy electricity rates, for example. Starting Delay start Selecting the Delay start function If the selected Delay start function has started, it is no longer possible to change the time. Delay start is not possible in the Drain/ Spin and Proofing programmes. Select the programme required.
Programme chart ECO 40-60 Max. load 7.0 kg Items For normally soiled cotton garments Tip A laundry load consisting of mixed cottons that are intended for washing at 40 °C or 60 °C can be washed in the same wash cycle. This programme is the most efficient in terms of energy and water consumption for washing cottons. Note for test institutes: Test programme for compliance with EU legislation regarding ecodesign No. 2019/2023 and energy labelling in accordance with Regulation No. 2019/2014.
Programme chart Minimum iron Cold to 60 °C Max. load 3.5 kg Items Synthetic and mixed fibre textiles as well as easy care cotton Tip Reduce the spin speed for fabric that creases easily. Woollens Cold to 40 °C Max. load 2.0 kg Items Wool or wool blend fabric Tip Reduce the spin speed for fabric that creases easily. Delicates Items Cold to 40 °C Max. load 2.
Programme chart Outerwear Cold to 40 °C Max. load 2.5 kg Items Performance outerwear (e.g. jackets and trousers) made from membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®, etc. Tip - Zip up or close any jackets with Velcro before washing. - Do not use fabric conditioner. - If required, these items can also be re-proofed using the Proofing programme. Proofing after each wash cycle is not recommended. Proofing 40 °C Max. load 2.
Extra options You can use the extra options buttons to augment the wash programmes. Use the sensor control to select or deselect extra options. Short For textiles with light soiling with no visible staining. The wash duration is reduced. Water + The water level in the main wash and the rinses will be increased. A second rinse cycle is carried out in the Separate rinse/Starch programme. Touch the sensor control: You can select other functions for the Water + sensor control.
Extra options Short Water + Soak Pre-wash The following extras can be selected in addition to the programmes ECO 40-60 – – – – Cottons Minimum iron – Woollens – – – – Delicates – Express 20 – – – Dark garments/Denim – Outerwear – Proofing – – – – Separate rinse/Starch – – – = can be selected – = cannot be selected 34 = activated automatically
Garment care label symbols Washing The figure quoted in the bucket is the maximum temperature at which the garment can be washed. Drying Normal temperature Low temperature Do not tumble dry Normal agitation Reduced agitation Much reduced agitation Approx. 200 °C Hand wash Approx. 150 °C Do not wash Approx. 110 °C Ironing Ironing with steam can cause irreversible damage.
Programme sequence Main wash Rinses Spinning Water level Wash rhythm Water level Rinses ECO 40-60 2–3 Cottons 2-5 Minimum iron Woollens 2 1,2,3 2-4 2,3 2 2,3 Delicates 2-4 Express 20 1 Dark garments/Denim 3-5 Outerwear Proofing – Drain/Spin – – Separate rinse/Starch 2,3 3-4 3 1 – – Please see the next page for a description of the symbols.
Programme sequence = low water level = medium water level = high water level = intensive rhythm = normal rhythm = sensitive rhythm = handwash rhythm = carried out – Special features in the programme sequence Anti-crease: At the end of the programme, the drum continues to turn at intervals for up to 30 minutes to help prevent creasing. Exception: there is no anti-crease phase in the Woollens programme. The washing machine can be opened at any time.
Changing the programme sequence Changing a programme (safety lock) A programme, temperature, spin speed or selected options cannot be changed once the machine has been successfully started. This prevents the machine being operated unintentionally, e.g. by children. If the washing machine is switched off during active programme operation, the standby function does not switch the washing machine off completely after 15 minutes.
Detergent The correct detergent Dispensing aids All detergents produced for automatic washing machines are suitable. Follow the manufacturer's instructions and dosage recommendations on the packaging. Use dispensing aids, (e.g. balls) if these are supplied with the detergent, particularly when using liquid detergent. For users in Asia: please use a low foaming detergent suitable for use in front-loading machines When purchasing detergent buy refill packs wherever possible.
Detergent Using fabric conditioner or starch separately Prepare the starch in accordance with the manufacturer's instructions on the packaging. Tip: When adding fabric conditioner, activate the Water + extra option. Add fabric conditioner to the compartment or insert the appropriate capsule. Add liquid starch to the compartment and powder or viscous starch to the compartment. Select the Separate rinse/Starch programme. Change the spin speed if necessary.
Detergent Recommended Miele detergents Miele detergents have been specially designed for day-to-day use in Miele washing machines. See “Detergents and care products” for more information about these detergents.
Detergent Recommended detergents in accordance with Directive (EU) Nr. 1015/2010 The recommendations apply to the temperature ranges given in the Programme chart.
Cleaning and care Cleaning the external casing and the control panel Risk of electric shock! Cleaning the detergent dispenser drawer Washing at low temperatures and the use of liquid detergent can lead to a build-up of mould and bacteria in the detergent dispenser drawer. Mains voltage is present when the washing machine is switched off Disconnect the machine from the electricity supply before cleaning or maintenance. For hygiene reasons, clean the entire drawer at regular intervals.
Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. If clogged, the siphon in the / compartment will not work and the compartment can overflow. Clean the siphon particularly thoroughly after using liquid starch a few times. Clean the fabric conditioner channel using a brush and warm water. Cleaning the detergent dispenser drawer compartment 1. Remove the siphon from compartment and clean under warm running water.
Cleaning and care Hygiene info (Cleaning the drum) Washing at low temperatures and/or using liquid detergent can cause bacteria and unpleasant odours to build up in the washing machine. Use the Cottons 90 °C programme to clean the washing machine. Clean the drum at the latest when the indicator light comes on. Cleaning the filter in the inlet valve Using pliers, carefully loosen the ribbed plastic nut on the inlet valve and unscrew it.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it. The programme does not start Problem Cause and remedy The control panel remains dark. There is no power to the washing machine. Check whether the plug is plugged in. Check whether the fuse has tripped.
Problem solving guide The programme is cancelled and a fault indicator light lights up in the control panel Problem Cause and remedy The fault indicator light lights up, and appear alternately in the time display and the buzzer sounds. The water outlet is blocked or restricted. The drain hose has been fixed too high. Clean the drain filter and the drain pump. The maximum delivery head is 1 m.
Problem solving guide During the programme, a symbol appears in the time display Message Cause and remedy lights up The programme selector was moved to a different position after the programme had started. Turn the programme selector back to the original position. At the end of the programme, an indicator light lights up in the control panel Problem Cause and remedy The indicator light lights up. Excessive foam has built up during washing.
Problem solving guide General problems with the washing machine Problem Cause and remedy The washing machine smells. The indicator light was ignored. When washing, a wash programme using a temperature above 60 °C has not been run for a long time. In order to prevent bacteria and unpleasant odours building up in the washing machine, run the Cottons 90 °C programme using Miele machine cleaner or a universal powder detergent. The door and the detergent drawer were closed after washing.
Problem solving guide General problems with the washing machine Problem Cause and remedy Fabric conditioner is not The siphon tube is not correctly positioned or is completely dispensed clogged. or too much water re Clean the siphon, see “Cleaning and care - Cleanmains in the coming the detergent dispenser drawer”. partment. At the end of the programme there is still liquid in the capsule. The small pipe in the detergent dispenser drawer onto which the capsule is placed is blocked.
Problem solving guide An unsatisfactory wash result Problem Cause and remedy Liquid detergent does not give the required result. Liquid detergents usually contain no bleaching agents. They do not remove fruit, coffee and tea stains. Use a general purpose powder detergent containing a bleaching agent. Use the appropriate capsule or add stain removers to the compartment. Never put stain removers and liquid detergent together in the dispenser drawer.
Problem solving guide The door will not open Problem Cause and remedy The door cannot be pulled open during a programme. The drum is locked during a programme. Follow the description in “5. Starting a programme – Adding or removing laundry”. After the programme is For safety reasons the drum door cannot be opened cancelled, flashing bars if the suds temperature is higher than 55 °C. ......... appear Wait until the temperature in the drum has dein the time display.
Problem solving guide Opening the door in the event of a blocked drain outlet and/ or power cut Switch off the washing machine. Draining the washing machine Remove the drain filter, though not completely. Place a suitable container under the access panel, e.g. a universal oven tray. Open the drain pump access panel. Blocked drain outlet If the drain outlet is blocked, there may be a large quantity of water left behind in the washing machine. Risk of scalding due to hot suds.
Problem solving guide Open the door Danger of injury due to rotating drum! Reaching into a moving drum is extremely dangerous. Always make sure that the drum is stationary before reaching in to remove laundry. Clean the drain filter thoroughly. Remove any foreign objects (e.g., buttons, coins etc.) and clean the interior. Turn the impellers by hand to check that they rotate freely. Replace the drain filter correctly and tighten it securely. Close the drain pump access panel.
Service Contact in the event of a fault Optional accessories In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department. Optional spare parts and accessories for this washing machine are available from your Miele Dealer, the Miele Spare Parts Department or via the internet at www.miele.co.uk. You can book a Miele Customer Service Department call-out online at www.miele.com/service.
*INSTALLATION* Installation Front view a Water inlet hose (pressure tested to 7000 kPa) e Detergent dispenser drawer b Mains connection cable g Access to drain filters, drain pumps and emergency release c Flexible drain hose (with detachable swivel elbow) d Control panel 56 f Door h Four height-adjustable feet
*INSTALLATION* Installation Rear view a Drain hose b Transport clips for inlet and drain hoses and mains connection cable c Mains connection cable d Protruding lid for holding when moving the machine e Water inlet hose (pressure tested to 7000 kPa) f Safety caps for transit bars g Transport clips for inlet and drain hoses and for storing transit bars when not in use 57
*INSTALLATION* Installation Installation surface A concrete floor is the most suitable installation surface. It is far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note: The machine must be level and securely positioned. To avoid vibrations during spinning, the machine should not be installed on soft floor coverings. If installing on a wooden joist floor: Install the machine on a plywood base (at least 59 x 52 x 3 cm).
*INSTALLATION* Installation Removing the transit bars Removing the right-hand transit bar Removing the left-hand transit bar Push the cover out and turn the lefthand transit bar 90° using the spanner supplied. Push the cover out and turn the lefthand transit bar 90° using the spanner supplied. Withdraw the transit bar. Withdraw the transit bar.
*INSTALLATION* Installation Covering holes Securing the transit bars Risk of injury from sharp edges. There is a risk of injury from reaching into holes that are not covered. Cover the holes for the transit bars after they have been removed. Secure the transit bars to the back of the washing machine. Make sure that the top catch is located above the holder. Risk of damage from incorrect Push the covers in firmly until they engage in position. 60 transport.
*INSTALLATION* Installation Fitting the transit bars Opening the covers Press against the retainer with a sharp object (a narrow screwdriver, for example). The cover opens. Fitting the transit bars To fit the bars, follow the instructions for removing them in reverse order. Tip: The bars will slide in more easily if you lift the drum slightly.
*INSTALLATION* Installation Levelling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used for levelling the washing machine. The machine is supplied with all four feet are screwed in. Use a level to check that the washing machine is standing level.
*INSTALLATION* Installation Installing under a continuous worktop Risk of electric shock due to exposed cables There is a risk of coming into contact with live parts while the lid is removed. Do not remove the washing machine lid. Washer-dryer stack The washing machine can be combined with a Miele tumble dryer in a washerdryer stack. The appropriate “WTV” stacking kit* to match your dryer is required. All parts marked* are available from your Dealer or Miele.
*INSTALLATION* Installation The water protection system The Miele water protection system protects all parts of the washing machine from water damage. The system consists of three main components: - the inlet hose - the electronic unit and drainage and overflow protection - the drain hose Inlet hose - Protection against bursting The inlet hose is tested to withstand pressure of at least 7,000 kPa.
*INSTALLATION* Installation Maintenance Only use a genuine Miele hose that has been pressure tested to withstand at least 7,000 kPa should you ever need a replacement. Damage caused by dirty water. A filter is located in the open end of the inlet hose and another in the intake point to protect the inlet valve in the washing machine. These filters must not be removed. Hose extension Longer hoses 2.5 or 4.0 m in length are available from your Miele Dealer or Miele as optional extras.
*INSTALLATION* Installation Water drainage Please note: The suds are drained through a drain pump with a 1 m delivery head. For the water to drain freely, the hose must be free of kinks. If required, the hose can be extended to a length of up to 5 m. Accessories are available from Miele or from your Miele dealer. For a delivery head of more than 1 m (up to a max. of 1.8 m) a replacement drain pump will need to be fitted. Please contact Miele for advice. For a delivery head of 1.
*INSTALLATION* Installation Electrical connection The washing machine is supplied with an electrical connection cable with moulded plug ready for connection to a switched socket. The socket must be easily accessible after the washing machine has been installed. If that is not possible, ensure that a suitable means of disconnection is provided on the installation side for each pole. Risk of fire from overheating.
2.0 3.5 0.23 0.34 0.45 0.35 1.20 35 30 52 69 50 26 50 55 Litres Water 0:39 0:20 1:59 2:39 2:29 2:39 2:39 3:19 h:min Running time – 27 33 24 54 29 35 38 °C Temperature 1 – 60 30 53 53 54 51 51 % Residual moisture 1200 1200 1200 1400 1400 1400 1400 1400 rpm Speed Test programme for compliance with EU legislation regarding ecodesign 2019/2023 and energy labelling in accordance with Regulation No. 2019/2014 30 40 3.5 7.0 30 7.0 0.27 2.0 20 0.
Technical data Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1054 mm Height for building under 850 mm Width for building under 600 mm Weight Approx. 85 kg Capacity 7.0 kg dry laundry Supply voltage See data plate Rated load See data plate Fuse rating See data plate Consumption data See “Consumption data” Minimum water flow pressure 100 kPa (1 bar) Maximum water flow pressure 1000 kPa (10 bar) Water inlet hose length 1.60 m Drain hose length 1.
Programmable functions The programmable functions are used to alter the machine's electronics to suit changing requirements. Programmable functions can be altered at any time. Opening the programming level Programming is carried out in 8 steps (, , ... ) using the sensor controls. Choosing and selecting a programmable function The number of the programmable function will appear in the time display as and a number: e.g. .
Programmable functions Editing and saving a programmable function Exit programming level You can either switch a programmable function on/off or select different options. The option you have selected is now stored in memory. You can change it again at any time. Touch the sensor control to switch the programmable function on/off or to select an option: Keypad tone Programmable function Available options Turn the programme selector to .
Programmable functions Lock code The lock code prevents the washing machine being used without your knowledge. When the code has been activated, you have to enter a code after switching the washing machine on. Otherwise the washing machine cannot be operated. Options = Lock code switched off (factory default setting) = Lock code is switched on Using the washing machine with a PIN code The code is 125 and cannot be altered. Switch on the washing machine.
Programmable functions Memory The washing machine will save the last settings (temperature, spin speed and some of the extras) selected for a programme after the programme has started. When this programme is chosen again, these saved settings will appear in the display. Options = Memory is switched off (factory default setting) = Memory is switched on Longer pre-wash Cottons If you require a longer pre-wash you can extend the pre-wash time.
Programmable functions Reduce temperature The boiling point for water is lower at high altitudes. In order to avoid water boiling, Miele recommend activating the reduce temperature setting at altitudes of more than 2000 m above sea level. The maximum temperature is reduced to 80 °C even when a higher temperature is selected.
Programmable functions Suds cooling When this is activated, additional water flows into the drum at the end of the main wash to cool the suds down. Hot suds can damage plastic drainage pipes. Anti-crease The anti-crease function helps prevent creasing if laundry is not going to be removed immediately after the end of the programme. Suds cooling takes place when a temperature of 70 °C or higher is selected for the Cottons programme.
Detergents and care products Detergent, fabric care, additives and machine care products are available for this washing machine. All the products have been designed for Miele washing machines. These and many other useful products can be ordered via the internet at www.miele.co.uk or from Miele (see end of this booklet for contact details).
Detergents and care products Specialist detergents Caps UltraDark These specialist detergents are available as convenient single-use capsules.
Detergents and care products Fabric care Machine care These fabric care products are available as convenient single-use capsules.
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Level 4, 141 Camberwell Road Hawthorn East, VIC 3123 Tel: 1300 464 353 Internet: www.miele.com.au China Mainland Miele Electrical Appliances Co., Ltd. 1-3 Floor, No.
WCA 030 Active en-GB M.-Nr.