Operation Manual

Spinning
31
Final spin speed in the pro-
gramme
When a programme is selected, the op-
timum spin speed for this wash pro-
gramme is shown in the display.
A faster spin speed can be selected for
certain wash programmes.
The highest selectable spin speed is in-
dicated in the table.
Programme rpm
Cottons 1400
Minimum iron 1200
Delicates 900
Woollens  1200
Silks  600
Shirts 900
QuickPowerWash 1400
Dark garments / Denim 1200
Outerwear 800
Proofing 1000
Drain / Spin 1400
Express 20 1200
Sportswear 1200
Automatic plus 1400
Separate rinse/Starch 1400
Clean machine 900
Interim spin
There is a spin cycle after the main
wash and between the rinses. A reduc-
tion in the final spin speed will also re-
duce the interim spin speed as appro-
priate.
Omitting the final spin (Rinse
hold)
If Rinse hold is selected, the laundry re-
mains in the water following the final
rinse cycle. This helps prevent creasing
if the laundry is not going to be re-
moved from the drum immediately after
the end of the programme.
 Set the spin speed .
To start the final spin
The washing machine will display the
maximum spin speed possible. You can
reduce the spin speed.
 Touch the Start/Stop sensor.
To end the wash programme
Select this option if you want to remove
the laundry when it is dripping wet and
without spinning.
 Reduce the spin speed to 0.
 Touch the Start/Stop sensor.
The water will be pumped away.
Omitting the interim spin and
the final spin
 Before the start of the wash pro-
gramme, reduce the spin speed to 0.
 Touch the Start/Stop sensor.
After the last rinse, the water will be
pumped away and the anti-crease
phase will switch on.
In some programmes an additional rinse
is introduced with this setting.