Operation Manual
Programme chart
34
Dark garments / Denim cold to 60°C Max. load 3.0 kg
Use for Black and dark items made of cotton, mixed fibre or denim.
Notes – Wash inside out.
– Denim often contains excess dye and may run during the first few
washes. Wash light and dark coloured items separately.
Outerwear cold to 40°C Max. load 2.5 kg
Use for Performance outerwear (e.g. jackets and trousers) made from mem-
brane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®
etc.
Notes – Zip up or close jackets before washing.
– Do not use fabric conditioner.
– If wished, these garments can also be re-proofed using the Proof-
ing programme. Proofing should not be done every time the gar-
ment is washed.
Proofing 40°C Max. load 2.5 kg
Use for Treating microfibre fabric, skiwear and table linen made from mainly
synthetic fibres to provide a water and dirt resistant finish.
Notes – The items should be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards either
in a tumble dryer or by ironing.
Drain / Spin Max. load 8.0 kg
Notes – Drain only: Select 0 rpm for the spin speed.
– Make sure you select the appropriate spin speed.