Operating instructions for washing machines To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr.
Contents Warning and Safety instructions ......................................................................... 5 Operating the washing machine ........................................................................ 12 Control panel ......................................................................................................... 12 How the control field works................................................................................... 13 Before using for the first time ....................
Contents Detergent ............................................................................................................. The correct detergent............................................................................................ Water softeners ..................................................................................................... Dispensing aids .....................................................................................................
Contents Consumption data ............................................................................................... 68 Note for test institutes ........................................................................................... 68 Technical data...................................................................................................... 69 Data sheet household washing machines............................................................. 70 Programmable functions ......................
Warning and Safety instructions This washing machine complies with all current local and national safety requirements. However, inappropriate use can lead to personal injury and damage to property. Read the operating instructions carefully before using the washing machine. They contain important information on safety, installation, use and maintenance. This prevents both personal injury and damage to the washing machine.
Warning and Safety instructions The washing machine can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst using it or have been shown how to use it safely and recognise and understand the consequences of incorrect operation. Safety with children Children under 8 years of age must be kept away from the washing machine unless they are constantly supervised.
Warning and Safety instructions Before connecting the washing machine, ensure that the connection data on the data plate (fuse rating, voltage and frequency) match the mains electricity supply. If in any doubt, consult a qualified electrician. Reliable and safe operation of this washing machine can only be assured if it has been connected to the mains electricity supply. The electrical safety of this washing machine can only be guaranteed when correctly earthed.
Warning and Safety instructions Unauthorised repairs could result in unforeseen dangers for the user, for which the manufacturer cannot accept liability. Repairs should only be undertaken by a Miele authorised service technician, otherwise any subsequent damage will not be covered by the warranty. If the electrical connection cable is faulty it must only be replaced by a Miele authorised service technician to protect the user from danger.
Warning and Safety instructions Correct use Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point. Before using the machine for the first time, check that the transit bars at the rear of the machine have been removed (see “Installation - Removing the transit bars”).
Warning and Safety instructions Take care when opening the drum door after using the steam function. Danger of burning due to escaping steam and the high temperature of the surface of the drum as well as the porthole glass. Stand back away from the machine and wait until the steam has dissipated. The maximum load for this washing machine is 8 kg (dry weight). See the “Programme chart” for the maximum recommended loads for individual programmes.
Warning and Safety instructions Colour run and dye removers contain sulphur compounds which can cause damage such as corrosion. Do not use these products in this machine. If detergent comes into contact with the eyes, rinse them thoroughly with lukewarm water immediately. If swallowed, seek medical assistance immediately and retain the packaging or label for reference. Those with skin problems or sensitive skin should avoid their skin coming into contact with detergent.
Operating the washing machine Control panel a Control field The control field consists of a time display and various sensor controls. The individual sensor controls are explained in the following sections. b Sensor controls – temperature for selecting the temperature. c Sensor controls – spin speeds for selecting the spin speed. d Sensors for extra options You can supplement wash programmes with extra options.
Operating the washing machine g Time display After the programme has started, the programme duration will appear in the display in hours and minutes. When Delay start is being used, the programme duration will appear after the Delay start time has elapsed. h Sensor controls The Delay start time selected will appear in the time display. After the programme has started, the Delay start time will begin to count down.
Before using for the first time Damage resulting from incorrect installation and connection. Installing and connecting the washing machine incorrectly will cause serious property damage. See “Installation”. Protective foil and stickers removal Remove: – The protective foil from the door – Any stickers from the front and the lid Please do not remove any labels (e.g. the data plate) which are visible when you open the door.
Before using for the first time Running the first programme Open the stopcock. Turn the programme selector to Cottons. The washing machine is now switched on and in the control panel, the temperature 60 °C lights up. Touch the Start/Stop sensor. The programme will start and the symbol lights up in the control panel. After 10 minutes, the indicators dim and the Start/Stop sensor starts flashing. Tip: Leave the door slightly open to allow the drum to dry.
Caring for the environment Disposal of the packing material Disposing of your old appliance The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electrical and electronic appliances often contain valuable materials. They also contain specific materials, compounds and components, which were essential for their correct function and safety.
Washing environmentally and economically Energy and water consumption Detergent – Water consumption and energy usage are determined by the size of the load. To make the most of your machine, load the maximum dry load for the programme you are using. – Do not exceed the amounts of detergent recommended by the manufacturer on the packaging. – When smaller amounts of laundry are washed, the automatic load control will reduce the amount of water and energy used.
1. Prepare the laundry Tip: Stains (e.g. blood, egg, coffee, tea) can be pre-treated using some handy tricks which can be found in the Miele guide to laundry care. Damage due to solvent-based Empty all pockets. Damage due to foreign objects. Nails, coins, paper clips, and so on can cause damage to garments and components in the machine. Check the laundry before washing and remove any foreign objects. Sort the laundry Sort the laundry by colour and by care label.
2. Load the washing machine Open the door Close the door Reach under the door grip and pull the door open. Make sure that no items are caught between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry. The most efficient use of energy and water is achieved when a full load is washed. However, do not overload as this reduces cleaning efficiency and causes creases. Unfold the laundry and load loosely into the drum.
3. Select a programme Programme selection The washing machine is switched on by turning the programme selector to a wash programme. Selecting a temperature and spin speed The wash programme’s preset temperature and spin speed light up brightly. The choice of available temperatures and spin speeds for the wash programme light up dimmed. The temperatures reached inside the washing machine might not be the same as the temperatures selected.
3. Select a programme Selecting Extras The selection of extras available for the wash programme lights up dimly. Touch the sensor for the extra you want. It then lights up brightly. Tip: You can select multiple extras for a wash programme. Please refer to “Extras” for more information.
4. Add detergent Detergent dispenser drawer Adding detergent Any detergent suitable for automatic front loading washing machines can be used. Please observe the instructions for use and dosage on the detergent packaging. Tips on dosing Adjust the detergent dosage to the level of soiling of the laundry and the size of the load. Reduce the amount of detergent with smaller loads (e.g. reduce the amount of detergent by ⅓ when washing a half load).
4. Add detergent CapDosing Inserting a capsule Three different types of capsule are available: Open the detergent dispenser drawer. = Fabric care (e.g. fabric conditioner, proofing agent) = Additives (e.g. detergent enhancer) = Detergent (for the main wash only) Each capsule contains the correct amount for one wash cycle. Caps are available to order from Miele or from the Miele online shop (see the end of this booklet for contact details). Open the lid of the / compartment.
4. Add detergent The wash programme will dispense the contents of the capsule at the correct time. Water intake to the compartment is solely via the capsule. Do not add any additional fabric conditioner to the compartment. Remove the empty capsule at the end of the programme. Close the lid and press it firmly shut. Close the detergent dispenser drawer. The capsule is opened by the act of inserting it in the detergent dispenser drawer.
5. Start the programme Starting a programme Touch the flashing Start/Stop sensor. The door will lock and the programme will start. – As long as the symbol is flashing in the control panel you can add laundry. – When the symbol lights up constantly, the door is locked until the end of the programme. If a delay start time has been selected, then this will count down in the time display.
6. End of programme - unload the drum End of programme The time display shows 0:00. The symbol will remain lit up in the control panel. The door is locked in the anticrease phase. Items left in the drum could discolour other items in the next wash or become discoloured themselves. Remove all items from the drum. Touch the Start/Stop sensor. The door will unlock and the symbol appears in the control panel. Check the folds in the door seal for any small articles, e.g.
Spinning Final spin speed Programme rpm Cottons 1400 Cottons 1400 Minimum iron 1200 Delicates 900 Woollens 1200* Shirts 900 Express 20 1200 Dark garments / Denim 1200 Final spin speed in the programme When a programme is selected, the sensor for the optimum spin speed for that programme will be brightly lit up in the control panel. For programmes marked with a * in the chart, the optimum spin speed is not the maximum spin speed. You can reduce the final spin speed.
Spinning To omit the final spin (Rinse hold) To omit rinse and interim spin and the final spin Touch the sensor (rinse hold). Touch the sensor. The laundry is not spun after the final rinse and remains in the final rinse water. This helps prevent creasing if the laundry is not going to be removed from the drum immediately after the end of the programme. After the last rinse, the water will be pumped away and the anti-crease phase will switch in.
Delay start With Delay start you can choose when you want the programme to start. You can delay the start of the programme by 30 minutes up to a maximum of 24 hours, allowing you to make use of night-time economy electricity rates, for example. Select delay start Delay start cannot be selected with Drain/Spin or Proofing. Select the programme required. Touch the sensor. To begin delay start Touch the flashing Start/Stop sensor. The delay start process starts and counts down in the time display.
Programme chart Cottons 60 °C/40 °C Max. load 8.0 kg Use for Normally soiled cotton garments. Note – These settings are the most efficient in terms of energy and water consumption for washing cottons. – At 60 °C, the actual wash temperature reached will be lower than 60 °C, although the wash performance is the same as with the Cottons 60 °C programme. Note for test institutes: The test programme conforms to EN 60456 and the energy label to Directive 1061/2010. Cottons Cold to 90 °C Max. load 8.
Programme chart Delicates Use for Cold to 40 °C Max. load 2.0 kg Delicate garments made from synthetic fibre, mixed fibre, rayon and viscose. Curtains, including net curtains, specified as machine-washable by the manufacturer. Notes – Dust in curtains usually makes a programme with pre-wash advisable. – Deselect the spin for items which crease easily. Woollens Cold to 40 °C Max. load 2.0 kg Use for Machine-washable or hand-washable wool or wool blend fabric.
Programme chart Outerwear Cold to 40 °C Max. load 2.5 kg Use for Performance outerwear (e.g. jackets and trousers) made from membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER® etc. Notes – Zip up or close jackets before washing. – Do not use fabric conditioner. – If wished, these garments can also be re-proofed using the Proofing programme. Proofing should not be done every time the garment is washed. Proofing 40 °C Max. load 2.
Extra options You can use the extra options buttons to augment the wash programmes. Extras are selected and deselected using the relevant sensors on the control panel. Water plus The water level in the wash and rinse stages is increased and a second rinse is carried out in the “Separate rinse / Starch” programme. You can select other functions for the Water plus sensor. These are described in “Programmable functions”. Pre-wash For laundry with large amounts of dirt, e.g. dust and sand.
Extra options The following Extras can be selected in addition to the programme Short Water plus Pre-wash Pre-ironing These Extras cannot be selected with programmes which are not listed in the chart below.
Garment care label symbols Washing Drying The figure quoted in the bucket is the maximum temperature the garment can be washed at. The number of bars under the symbol indicates the level of agitation permitted. The number of dots indicates the drying temperature No bar under the symbol: = normal agitation One bar under the symbol: = reduced agitation Two bars under the symbol: = much reduced agitation Hot iron (max. sole plate temp. approx.
Programme sequence Main wash Rinses Spinning Water level Wash rhythm Water level Rinses Cottons 2-5 Cottons 2-5 Minimum iron 2-4 Delicates 2-4 Woollens 2 2)3) 1)2)3) 2)3) 2)3) 3) Shirts 3-4 Express 20 1 Dark garments / Denim 3-5 Outerwear Proofing – Drain / Spin – – Separate rinse / Starch 2)3) 3-4 3) 1 – – Please see the next page for a de
Programme sequence = low water level = medium water level = high water level = intensive rhythm = normal rhythm = sensitive rhythm = handwash rhythm = carried out – Special features in the programme sequence Anti-crease: At the end of the programme the drum continues to turn at intervals for up to 30 minutes to help prevent creasing. Exception: there is no anti-crease phase in the Woollens programme. The door can be opened at any time during the anti-crease phase.
Changing the programme sequence Changing a programme (safety lock) Removing laundry after cancelling the programme A programme, temperature, spin speed or selected option cannot be changed once the machine has been successfully started. This is to prevent the operation of the machine being tampered with (by a child, for example). If you want to remove the laundry when it is dripping wet: Cancelling a programme You can cancel a wash programme at any time after it has started.
Changing the programme sequence Adding or removing laundry You can add or remove laundry at the start of a wash programme as long as the symbol is flashing in the control panel. Briefly touch the Start/Stop sensor. The programme will stop and the door will unlock. Pull open the door. Add or remove items. Close the door. Touch the Start/Stop sensor. The programme will continue.
Detergent The correct detergent Dispensing aids All detergents produced for automatic washing machines are suitable. Follow the manufacturer's instructions and dosage recommendations on the packaging. Use dispensing aids, (e.g. balls) if these are supplied with the detergent, particularly when using liquid detergent. For users in Asia: please use a low foaming detergent suitable for use in front-loading machines When purchasing detergent buy refill packs wherever possible.
Detergent Miele recommended detergents Miele detergents and care products have been specially designed for Miele washing machines. They are available to order via the internet at www.miele.co.uk or from Miele.
Detergent Recommended detergents in accordance with Directive (EU) Nr. 1015/2010 The recommendations apply to the temperature ranges given in the Programme chart.
Detergent Dispensing fabric conditioner and liquid starch at the end of the programme Adding fabric conditioner or liquid starch separately Prepare the starch in accordance with the manufacturer's instructions on the packaging. Tip: When adding fabric softener, activate the Water plus extra. Add fabric conditioner to the compartment or insert the appropriate capsule. Add liquid starch to the compartment and powder or viscous starch to the compartment.
Cleaning and care Cleaning the drum (Hygiene info) Washing at low temperatures and/or using liquid detergent can cause bacteria and unpleasant odours to build up in the washing machine. Use the Cottons 90 °C programme to clean the machine. Run this programme at the latest when the indicator lights up.
Cleaning and care Cleaning the siphon tube and the channel Cleaning the detergent dispenser drawer housing Liquid starch can cause the siphon to become clogged. Make sure that you clean the siphon and siphon tube particularly thoroughly after using liquid starch a few times. Use a bottle brush to remove detergent residues and limescale from the jets inside the detergent dispenser drawer housing. Clean the siphon. 1. Remove the siphon from the compartment and rinse under hot running water.
Cleaning and care Cleaning the water inlet filter Cleaning the filter in the inlet valve The washing machine has two filters to protect the inlet valve. You should inspect the filters approximately every 6 months, or more often if there are frequent interruptions to the external water supply. Using pliers, carefully loosen the ribbed plastic nut on the inlet valve and unscrew it. Cleaning the filter in the inlet hose First turn off the stopcock. Unscrew the inlet hose from the stopcock.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it. The programme does not start Problem Cause and remedy The control panel remains dark. There is no power to the machine. Check whether the mains plug is plugged in and switched on.
Problem solving guide The programme is cancelled and a fault indicator light lights up in the control panel Problem Cause and remedy The fault indicator light lights up, and appear alternately in the time display and the buzzer sounds. The water inlet is blocked or restricted. Check whether the stopcock is opened properly. Check whether the inlet hose is kinked. Check whether the water pressure is too low.
Problem solving guide During the programme, a symbol appears in the time display Message Cause and remedy The programme selector was moved to a different position after the programme had started. Turn the programme selector back to the original position. lights up The programme has been interrupted. Open the door. Close the door. At the end of the programme, an indicator light lights up in the control panel Problem Cause and remedy The indicator light lights up.
Problem solving guide General problems with the washing machine Problem Cause and remedy The washing machine smells. The indicator light was ignored. A wash programme using a temperature above 60 °C has not been run for a long time. In order to prevent bacteria and unpleasant odours building up in the washing machine, run the Cottons 90 °C programme using Miele machine cleaner or a universal powder detergent. The door and the detergent dispenser drawer were left shut after washing.
Problem solving guide General problems with the washing machine Problem Cause and remedy Fabric conditioner is not The siphon tube is not correctly positioned or is completely dispensed clogged. or too much water re Clean the siphon, see “Cleaning and care - Cleanmains in the coming the detergent dispenser drawer”. partment. At the end of the programme there is still liquid in the capsule. The small pipe in the detergent dispenser drawer onto which the capsule is placed is blocked.
Problem solving guide An unsatisfactory wash result Problem Cause and remedy Liquid detergent does not give the required result. Liquid detergents usually contain no bleaching agents. They do not remove fruit, coffee and tea stains. Use a general purpose powder detergent containing a bleaching agent. Use the appropriate capsule or add stain removers to the compartment. Never put stain removers and liquid detergent together in the dispenser drawer.
Problem solving guide The door will not open Problem Cause and remedy The door cannot be pulled open during a programme. The door is locked during a programme. Touch the Start/Stop sensor to cancel the programme. The programme is cancelled, the door will unlock and you will be able to pull it open. There is still water in the drum and the machine is unable to drain.
Problem solving guide Opening the door in the event of a blocked drain outlet and/ or power cut Switch off the washing machine. Draining the washing machine Remove the drain filter, though not completely. Place a suitable container under the access panel, e.g. a universal oven tray. Open the drain pump access panel. Blocked drain outlet If the drain outlet is blocked, there may be a large quantity of water left behind in the washing machine. Risk of scalding due to hot suds.
Problem solving guide Open the door Danger of injury due to rotating drum! Reaching into a moving drum is extremely dangerous. Always make sure that the drum is stationary before reaching in to remove laundry. Clean the drain filter thoroughly. Remove any foreign objects (e.g., buttons, coins etc.) and clean the interior. Turn the impellers by hand to check that they rotate freely. Replace the drain filter correctly and tighten it securely. Close the drain pump access panel.
Service Contact in case of malfunction Optional accessories In the event of any faults which you cannot remedy yourself, please contact your Miele Dealer or Miele Service. Optional spare parts and accessories for this washing machine are available from your Miele Dealer, the Miele Spare Parts Department or via the internet at www.miele.co.uk. Contact information for Miele Service can be found at the end of this document.
Installation Front view a Water inlet hose (pressure tested to 7000 kPa) e Detergent dispenser drawer b Mains connection cable g Access to drain filters, drain pumps and emergency release c Flexible drain hose (with detachable swivel elbow) f Door h Four height-adjustable feet d Control panel 57
Installation Rear view a Drain hose b Transport clips for inlet and drain hoses and mains connection cable c Mains connection cable d Protruding lid for holding when moving the machine 58 e Water inlet hose (pressure tested to 7000 kPa) f Safety caps for transit bars g Transport clips for inlet and drain hoses and for storing transit bars when not in use
Installation Installation surface A concrete floor is the most suitable installation surface. It is far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note: The machine must be level and securely positioned. To avoid vibrations during spinning, the machine should not be installed on soft floor coverings. If installing on a wooden joist floor: Install the machine on a plywood base (at least 59 x 52 x 3 cm).
Installation Using the spanner supplied, turn the left-hand transit bar 90°, then Turn the right-hand transit bar 90°, then withdraw the transit bar. withdraw the transit bar.
Installation Risk of injury from sharp edges. There is a risk of injury from reaching into holes that are not covered. Cover the holes for the transit bars after they have been removed. Secure the transit bars to the back of the washing machine. Make sure that the top catch is located above the holder. Risk of damage from incorrect Fit the stoppers onto the two holes. transport. The washing machine may become damaged if moved without the transit bars in place.
Installation Levelling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used for levelling the washing machine. The machine is supplied with all four feet are screwed in. Use a level to check that the washing machine is standing level.
Installation Installing under a continuous worktop Risk of electric shock due to exposed cables There is a risk of coming into contact with live parts while the lid is removed. Do not remove the washing machine lid. Washer-dryer stack The washing machine can be combined with a Miele tumble dryer in a washerdryer stack. The appropriate “WTV” stacking kit* to match your dryer is required. All parts marked* are available from your Dealer or Miele.
Installation The water protection system The Miele water protection system protects all parts of the washing machine from water damage. The system consists of three main components: – the inlet hose – the electronic unit and drainage and overflow protection – the drain hose Inlet hose – Protection against bursting The inlet hose is tested to withstand pressure of at least 7,000 kPa. Electronic unit and washing machine housing – Sump Any leaking water is collected in a sump in the base of the machine.
Installation Connection to the water supply Maintenance The washing machine should be connected to a mains water supply in accordance with current local and national safety regulations. The German authorities do not require it to have a non-return valve as the washing machine has been designed to comply with DIN regulations. The flow pressure must amount to a minimum of 100 kPa (1 bar) and must not exceed an overpressure of 1000 kPa (10 bar).
Installation Water drainage Please note: The suds are drained through a drain pump with a 1 m delivery head. For the water to drain freely, the hose must be free of kinks. If required, the hose can be extended to a length of up to 5 m. Accessories are available from Miele or from your Miele dealer. For a delivery head of more than 1 m (up to a max. of 1.8 m) a replacement drain pump will need to be fitted. Please contact Miele for advice. For a delivery head of 1.
Installation Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out by a suitably qualified and competent person, in strict accordance with current national and local safety regulations (BS 7671 in the UK). The fuse cover must be refitted when changing the fuse, and if the fuse cover is lost, the plug must not be used until a suitable replacement is obtained.
Consumption data Load Energy Water Duration Residual moisture kg kWh Litres h:min % 60 °C 8.0 0.90 49 2:59 53 60 °C 4.0 0.88 48 2:59 53 40 °C 4.0 0.53 39 2:59 53 90 °C 8.0 2.10 49 2:29 53 60 °C 8.0 1.35 49 2:29 53 60 °C 4.0 1.15 48 2:19 53 40 °C 8.0 0.98 54 2:39 53 20 °C 8.0 0.35 54 2:39 53 Minimum iron 30 °C 3.5 0.45 52 1:59 30 Delicates 30 °C 2.0 0.25 30 1:09 – 30 °C 2.0 0.23 35 0:38 – 40 °C 3.5 0.34 30 0:20 – 60 °C 2.
Technical data Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1054 mm Height for building under 850 mm Width for building under 600 mm Weight Approx. 100 kg Capacity 8 kg dry laundry Voltage See data plate Connected load See data plate Fuse rating See data plate Consumption data See “Consumption data” Minimum flow pressure 100 kPa Maximum flow pressure 1000 kPa Inlet hose length 1.60 m Drain hose length 1.50 m Mains connection cable length 2.
Technical data Data sheet household washing machines In acc. with delegated regulation (EU) No.
Technical data 2 3 4 5 6 7 Based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and partial load, and the consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used. Based on 220 standard washing cycles for cotton programmes at 60 °C and 40 °C at full and partial load. Actual water consumption will depend on how the appliance is used.
Programmable functions The programmable functions are used to alter the machine's electronics to suit changing requirements. Programmable functions can be altered at any time. The programming is carried out in eight steps (, , ... ) using the sensor controls. Accessing the programming level Pre-requisites: – The washing machine is switched on (the programme selector is pointing to a wash programme).
Programmable functions Editing and saving the programmable function Exit programming level You can either switch a programmable function on or off or select different options. The option you have selected is now stored in memory. You can change it again at any time. Touch the or sensor control to switch the programmable function on/off or to select an option: Sensor tone Turn the programme selector to .
Programmable functions Lock code The lock code prevents the washing machine being used without your knowledge. When the code has been activated, you have to enter a code after switching the washing machine on. Otherwise the washing machine cannot be operated. Options = Lock code switched off (factory default setting) = Lock code is switched on Using the washing machine with a lock code The code is 125 and cannot be altered. Switch on the washing machine.
Programmable functions Memory The washing machine will save the last settings (temperature, spin speed and some of the extras) selected for a programme after the programme has started. When this programme is chosen again, these saved settings will appear in the display. Options = Memory is switched off (factory default setting) Activating gentle action reduces the drum action and is suitable for washing lightly soiled items more gently.
Programmable functions Water plus You can determine the amount of water used if the Water plus extra is selected. Options = More water is used in the wash and rinse stages (factory default setting) = An extra rinse is carried out = The water level is increased in the wash and rinse stages and an additional rinse is carried out Water plus level There are three different water levels which can be selected by activating the Water plus extra.
Programmable functions Anti-crease The anti-crease function helps prevent creasing if laundry is not going to be removed immediately after the end of the programme. The drum continues to turn at intervals for up to 30 minutes at the end of the programme. The door can be opened at any time. Options Backlight brightness dimmed The brightness of the dimmed sensors in the control panel can be set to one of seven different levels. The brightness changes as soon as you select a different setting.
Optional accessories Detergent, fabric care, additives and machine care products are available for this washing machine. All the products have been designed for Miele washing machines. Specialist detergents These and many other useful products can be ordered via the internet at www.miele.co.uk or from Miele (see end of this booklet for contact details).
Optional accessories WoolCare Additive – Liquid detergent for woollens and delicates Booster – Includes a special wheat protein conditioning formula – Helps prevent felting – Gentle on colours – For removing stains – For white and coloured laundry – Available as capsules in convenient single dose amounts – Only available as capsules Machine care SilkCare Machine cleaner – Liquid detergent for silks – For cleaning the washing machine thoroughly and effectively – Contains a special silk protei
United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600 Internet: www.miele.com Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 1 Gilbert Park Drive Knoxfield, VIC 3180 Tel: 1300 464 353 Internet: www.miele.com.au China Miele (Shanghai) Trading Ltd. 1-3 Floor, No. 82 Shi Men Yi Road Jing' an District 200040 Shanghai, PRC Tel: +86 21 6157 3500 Fax: +86 21 6157 3511 E-mail: info@miele.cn, Internet: www.miele.
WDD 035 Series 120 en-GB M.-Nr.