Operation Manual
5. Start the programme
26
Starting a programme
Touch the flashing Start/Stop sensor.
The door will lock and the programme
will start.
– As long as the symbol is flashing
in the control panel you can add
laundry.
– When the symbol lights up con-
stantly, the door is locked until the
end of the programme.
If a delay start time has been selected,
then this will count down in the time
display. At the end of the delay start
time or immediately after the pro-
gramme has started the programme
duration will appear in the time display.
Energy savings
After 10minutes, the indicators dim.
The Start/Stop sensor flashes slowly.
To reactivate the indicators:
Touch the Start/Stop sensor (this
does not have any effect on a running
programme).