Operation Manual

5. Add detergent
29
There are several options for adding de-
tergent.
TwinDos
Before using TwinDos for the first time
the display will show information about
the factory default settings for TwinDos.
The following will appear in the display:
UltraPhase 1+2 set for medium water hard-
ness level. Change in "Settings"/ "TwinDos"
 Touch the sensor repeatedly until
until you have read all the rows of
text.
The OK sensor will light up.
 Touch the OKsensor to confirm.
Miele 2 Phase system
UltraPhase1 and UltraPhase2 need to
be dispensed in different ratios depend-
ing on the colour mix of the laundry
load.
 Touch the Dos  sensor.
For whites

 Use the andsensors to select
the colour mix of the laundry and
confirm with the OKsensor.
UltraPhase1 and UltraPhase2 will be
dispensed accordingly.
Liquid detergent/Fabric conditioner
It is possible to use other types of liquid
detergent/fabric conditioner. Refillable
TwinDos containers (optional accessor-
ies) are required for this.
The washing machine's electronic set-
tings need to be adjusted accordingly.
See "Settings - TwinDos".
 Touch the Dos  sensor.
Both agents


 Confirm the option displayed with the
OK button or select another deter-
gent or fabric conditioner with the 
and  sensors.
Tip: The recommended detergent(s) is
shown in the display and marked with a
tick().
The appropriate amount of detergent
and/or fabric conditioner for the pro-
gramme will now be dispensed.
Adding stain remover
There are two options for adding stain
remover in addition to using the auto-
matic dispensing system:
– Use the Booster cap
– Add stain remover to the com-
partment.