Operating and installation instructions for Washer-extractor WS 5427 MC 23 It is essential to read these operating instructions before installing or using the machine, to avoid the risk of accident or damage to the machine. Gi M.-Nr.
Contents Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Caring for our environment Disposal of the packing material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Disposal of your old machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Economy tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Adding detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Water softeners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents After Sales Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Installation View from rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warning and safety instructions Read the operating instructions before using this machine for the first time. They contain important information about the safety, use and maintenance of the machine. This way you will avoid the risk of accidents and damage to the machine. Keep these operating instructions in a safe place and ensure that new users are familiar with the content. Pass them on to any future owner of the machine.
Warning and safety instructions The best materials are used in the manufacture of this machine, and every care is taken to check all parts. However, with time, deterioration of parts can occur, especially with such components as hoses, giving rise to leaks. This should be borne in mind if operating the machine without supervision. Check the hoses regularly for signs of wear, and change in good time, to avoid leaks and subsequent damage.
Warning and safety instructions If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale the machine only use proprietary non-corrosive descaling agents and strictly observe the instructions on the packaging. If in doubt contact the Miele Customer Service Dept. or your Miele Dealer.
Caring for our environment Disposal of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled. Ensure that any plastic wrappings, bags etc. are disposed of safely and kept out of the reach of babies and young children. Danger of suffocation! Rather than just throwing these materials away, please ensure they are offered for recycling.
Guide to the machine Front view Use This washer-extractor is particularly suitable for use in guest houses, hair dressing salons, etc., as well as for heavy domestic use where considerable amounts of soiled laundry are handled.
Guide to the machine Control panel a Door button a Opens the drum door and releases any additional option buttons which have been pushed in.
Guide to the machine Multi function display a Display b Delay start button c Indicator lights for – Temperature %°C After a programme has started the actual suds temperature is displayed in 5°C steps until the temperature set for the main wash is reached. The Temperature %°C indicator lights up. – Time left j min Once the temperature set for the main wash has been reached the time left for the programme to run shows in the display in hours and minutes. The Time left j min indicator lights up.
Before using for the first time Important: the machine must be correctly installed and connected to the electricity and water supplies in accordance with national and local safety regulations. Check that the transit fitting at the rear of the machine has been removed. See "Installation", "Electrical connection" and "Plumbing" at the end of this booklet.
How to wash correctly Brief instructions For brief instructions follows steps (A,B,C ,...). Before washing A Sort the laundry. Dark textiles often contain excess dye and should be washed separately several times before being included in a mixed load. Delicate textiles should be washed separately in a delicates programme (use a washing bag where appropriate). ^ Pre-treating the washing. Badly soiled areas, e.g.
How to wash correctly B Open the drum door. To start the programme C Load the drum. G Turn the programme selector to the required programme (See "Programme chart"). Unfold the laundry and load loosely in the drum. To achieve best results it is advisable to make up mixed loads consisting of both large and small items. This improves the washing effect and helps distribute the load evenly during spinning. Overloading causes creasing and reduces cleaning efficiency.
How to wash correctly Coin-box / time counter Delay start d J If your machine is fitted with a Coin-box / time counter: K Select delay start if required. ^ Insert coins / tokens. ^ Press the h Start button. Failing to follow these instructions will result in coins or tokens being "swallowed". Coins will also be lost if after inserting the coins / tokens and before pressing the h Start button: – the door is opened.
How to wash correctly After washing M Turn the programme selector to r End. N Close the stopcocks. O Press the a door button. P Remove the laundry. Only remove laundry from the machine once the drum has stopped turning. Reaching into a moving drum is extremely dangerous and could result in injury. Make sure the drum is empty, otherwise when the machine is next used, these items may become damaged (e.g. shrink) or cause other laundry to discolour.
How to wash correctly To change a programme To omit a programme stage Programmes A, B, C, D, E can be changed at any time as long as the programme sequence allows for this. ^ Turn the programme selector to r End. ^ Turn the programme selector to the required programme. The new programme will continue from the same stage that the previously selected programme was at.
Textile care symbols Washing / Handwash 9 Cottons 95°C h Do not wash 8 Cottons 60°C apf Dry clean 7 Cottons 40°C D Do not dry clean 5 Minimum iron 95°C y Suitable for chlorine bleaching 4 Minimum iron 60°C z Not suitable for chlorine 2 Minimum iron 40°C 41 Delicates/Synthetics c Machine washable Woollens The significance of the bar beneath the wash tub: e no bar, normal (maximum) agitation, eg Cottons or Minimum iron programme bleaching Tumble dry q At normal temperature r At
Detergent All modern detergents produced for automatic washing machines are suitable, including liquid, compact (concentrated), and special application detergents. Use dispensing aids, e.g. balls, if these are supplied with the detergent. Woollens and knitwear containing wool mixtures should be washed using a detergent specifically designed for washing woollens. Instructions for use and recommended amounts are given on the detergent packaging.
Detergent Adding detergent Water softeners A water softener can be used to cut down on the use of detergents in water hardness ranges II - IV. Dispense according to the amount specified on the packaging. First add detergent and then the water softener. Dispense the detergent as required for soft water.
Detergent Fabric conditioners, texturisers The conditioner or liquid starch is automatically dispensed in the last rinse. At and liquid starch Fabric conditioners make garments soft and fluffy to handle and help prevent static cling when tumble drying. Texturisers are synthetic starch formulations which stiffen items of laundry, e.g. shirts, tablecloths and bed linen. Starch stiffens and gives body to items of laundry, e.g. shirts, tablecloths and bed linen.
Programmes Programme chart Programme Fabric type Temperature max. rpm Cottons Cottons and linen fabrics, e.g. bed linen, 95°C to 30°C table linen, towelling, jeans, T-shirts, underwear, nappies. 1250 Minimum iron Textiles made with synthetic, mixed fibres, or minimum iron cottons, e.g. shirts, blouses, workwear, table linen 95°C to 30°C 900 60°C to 20°C 600 Machine washable curtains. 30°C - 20°C 600 Woollens Machine-washable or hand-washable wool or wool blend fabrics.
Programmes max. load 6 kg 3 kg 1.5 kg Additional opitons – – – – – – Notes With pre-wash For heavily soiled laundry press the "With Starch pre-wash " button. For dark coloured fabNo final spin rics use a liquid detergent. With pre-wash For heavily soiled laundry press the "With Starch pre-wash " button No final spin – With pre-wash Use the woollens programme for any textiles which contain wool.
Programmes Programme sequence The programme sequences outlined below are based on the basic programme with a full load. Additional options which can be selected have not been taken into account. The programme sequence indicator lights show the stage the programme has reached. Cottons Main wash Water level: low Rinses Water level: medium No. of rinses - 3 with a max. load - 2 with a partial load Final spin: max. 1250 rpm Minimum iron Main wash Water level: low Rinses Water level: medium No.
Programmes Additional programmable functions It is possible to have additional programmable functions and / or programme sequence changes carried out by a Miele Service Dealer or Service Engineer. Any changes to the standard machine version must be noted on a card left with the machine as a record for any subsequent servicing work.
Cleaning and care Extra cleaning Disconnect the machine from the mains electricity supply and withdraw the plug from the socket prior to cleaning the machine. Cleaning the machine ^ Clean the casing with a mild non-abrasive detergent or soap and water. Wipe dry with a soft cloth. ^ Clean the control panel with a damp cloth and wipe dry with a soft cloth. ^ The drum and any other stainless steel components can be cleaned using a suitable proprietary stainless-steel cleaning agent.
Cleaning and care Cleaning the drainage system Check the fluff filter, initially after 3 - 4 washes to ascertain how often it is likely to require cleaning. ^ Place a suitable container (2 litres) underneath the drain fixture. Under normal conditions approx. 2 litres of water will drain out of the machine when the fluff filter is removed. However, if the drain outlet is blocked, more water will be retained in the machine (max. 30 litres).
Cleaning and care ^ Once the flow of water ceases, remove the fluff filter completely and clean it. ^ Remove any foreign objects (buttons, coins etc.) and fluff. ^ Turn the impeller by hand to check that it is free to rotate. Any foreign object causing an obstruction must be removed. ^ Clean the inside of fluff filter housing. Remove any deposits of limescale and detergent or foreign objects from the thread of the filter housing and filter unit. ^ Put the fluff filter back in place and secure.
Cleaning and care Cleaning the detergent dispenser drawer Remove detergent residues regularly. ^ Clean the detergent dispenser compartments and the fabric conditioner compartment with warm water. ^ Pull out the detergent dispenser drawer until a resistance is felt. Press down the red release catch and at the same time pull the drawer right out of the machine. ^ Remove the siphon from compartment p and rinse under warm running water. ^ Then clean the tube that it sits over using warm water.
Cleaning and care Cleaning the filters in the water inlet The machine has the following filters to protect the inlet valves: – in the free end of any water inlet hose – in the water inlet valve(s) for connecting the hose(s) to the machine. To clean the filter in the inlet hose: ^ Turn off the stopcock. ^ Carefully unscrew the knurled coupling connecting the inlet hose to the check valve which is attached to the stopcock (see "Plumbing"). ^ Remove the rubber seal from the recess.
Problem solving guide With the help of the following notes minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Service Department. Repair work to electrical machines should only be carried out by a suitably qualified engineer in accordance with local and national safety regulations. Unauthorised repairs could be dangerous. Fault The I/h On/Start indicator light does not light up. The programme does not start.
Problem solving guide Fault Possible cause Remedy The check light p The water inlet is flashes, the r End blocked. indicator light is on, but the laundry in the machine has not been washed. – Turn the programme selector to r End. – Open the stopcock(s). – Select a programme. – Press the h Start button. If little or no water is taken in during the next programme, the water pressure may be too low. If it is adequate there may be a technical fault. In this case, call the Miele Service Dept.
Problem solving guide Fault Possible cause Despite adequate The filters in the water water supply pres- inlet hoses may be sure the machine clogged. takes a long time to fill. The water supply presLarge amounts of unused detergent sure is too low. remain in the dispenser. Washing powder becomes viscous when used together with a water softener. Fabric conditioner The dispenser drawer was opened while fabis not completely ric conditioner was bedispensed or too much water remains ing flushed in.
Problem solving guide Fault Possible cause Remedy There are white residues which look like powder detergent on dark coloured laundry. The detergent contained compounds (zeolites) to aid water softening which are not soluble in water. These have ended up on the laundry. – Try and brush off the residues with a soft brush once the laundry is dry. – Use a liquid detergent to wash dark coloured textiles. Liquid detergents usually contain no zeolites.
Problem solving guide Fault The laundry is either not spun at all or not spun satisfactorily. Possible cause Remedy The "No final spin" k button was pushed in. The spin speed selected was too low. Spin the load using a higher spin speed. The machine was not able to Always make up mixed loads distribute the laundry load consisting of large and small items. evenly. To protect the machine, laundry was either only spun at a reduced speed or not at all. Large items which tangle or roll up in the drum (e.g.
Problem solving guide Opening the drum door in the event of a power failure Drain pump version: ^ Turn the programme selector to r End. Always make sure that the drum is stationary before reaching into the machine to remove laundry. Reaching into a moving drum is extremely dangerous and could cause injury. ^ Open the access panel to the drainage system and drain off any water (see "Cleaning and care" - "Cleaning the drainage system").
After Sales Service In the event of any faults which you cannot remedy yourself please contact – Your Miele dealer or – Your nearest Miele Service Department (see back cover for the address). When contacting the Service Department, please quote the model and serial number of your machine, both of which are shown on the data plate visible at the top inside of the door above the porthole glass when the door is open. Please note that telephone calls may be monitored and recorded to improve our service.
Installation View from rear a Cable entry for extra equipment b Inlet hose (cold water) c Inlet hose (hot water) d Transit fitting (remove before commissioning) e Supply power cable f Drain hose (for drain pump) g Height adjustable feet 38
Installation Installation surface A concrete floor is the most suitable surface for a washing machine, being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note the following points: ^ The machine must be level and securely positioned. Do not install the machine near or directly above an open gully or floor drain. Moisture from these can penetrate the machine and damage the electric components.
Installation Removing the transit fitting A Turn the left-hand transit bar 90°. B Turn the right-hand transit bar 90°. C Withdraw the two bars together with the support plate. D Plug the holes with the plastic caps supplied. The machine must not be moved without the transit fitting in place. The transit fitting should be stored in a safe place for future use. It must be re-fitted if the machine is to be moved again (e.g. when moving house). Re-fitting is carried out by reversing the procedure.
Installation Levelling the machine The machine must stand perfectly level on all four feet to ensure safe and proper operation. ^ Using a screwdriver loosen foot 1 together with counter nut 2 by turning it anti-clockwise, and unscrew to the required height. ^ Put the machine back on all four feet. The four adjustable feet are used to level the machine. All four feet are screwed in when the machine is delivered. Screwing out and adjusting the feet.
Installation Installation on a raised plinth 42
Installation a Cold water inlet hose - blue stripes (see "Plumbing") b Hot water inlet hose - red stripes (see "Plumbing") Washer and Dryer stack A Miele tumble dryer can be stacked with the washing machine. A stacking kit* is necessary. Coin mechanism / Time counter c Electrical connection (see "Electrical connection U.K.") This machine can be equipped with a coin / token box.* d Coin mechanism (optional) Separate installation and wiring instructions are supplied with the coin box.
Installation Electrical connection U.K. All electrical work must be carried out by a suitably qualified and competent person, in strict accordance with national and local safety regulations. Ensure power is not supplied to the machine while installation work is being carried out. The voltage, rated load and fuse rating are given on the data plate. Please ensure these match the site mains supply.
Installation Non-rewireable plugs BS 1363 If this machine is fitted with a non-rewireable plug, the following information applies: If the socket outlets are not suitable for the plug supplied with the product, it must be cut off and an appropriate plug fitted. The fuse carrier and fuse should be removed from the old plug and disposed of. The plug cut from the flexible cord should then be disposed of and on no account be inserted into any socket elsewhere in the house (electric shock hazard).
Installation Plumbing This machine is approved for all UK applications as suitable for category 5. Product is listed in the WRAS regulations advisory scheme directory and is suitable for direct connection to mains drinking water. No special plumbing arrangements e.g. break tanks are required. A Water Council approved check valve is supplied in the accessories pack provided with this machine. It should be fitted in between the stopcock(s) and the water inlet hose(s).
Installation Connection to hot water supply To keep electricity consumption costs down this machine can be connected to a (ring) piped hot water supply. The maximum temperature must not exceed 70°C. It is not economical to run it from an individual hot water supply if it is not in continuous use, as the water in the supply pipes cools down and more energy would be required to reheat the water. For operational reasons the machine must not be connected to hot water only.
Installation Connection to drainage Machines with a drain pump The machine drains via a drain pump with a max. delivery head of 1 metre. The 1.5 metre long drain hose must not be kinked as this would restrict drainage. The hook in the end of the drain hose can be turned or taken off if required. The drain hose may be connected as follows: – Direct into a sink (drain pump version LP). Hook the hose over the edge of the sink and secure .
Technical data Height 85 cm Width 59.5 cm Depth 71.5 cm Depth with door open 107 cm Weight 114 kg max. floor load 2778 Newton (278 kg) Capacity 6 kg dry laundry Connected load see data plate Rated load see data plate Fuse rating see data plate Water flow pressure min. 1 bar Static water pressure max. 10 bar Max. delivery head (drain pump version LP) max. 1m Noise level during spin (sound pressure according to German 3.
Alteration rights reserved/000/0902 M.-Nr.
