Operating instructions Washer-dryer To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-AU, NZ M.-Nr.
Contents Caring for the environment .............................................................................. 5 Warning and Safety instructions ..................................................................... 6 Operating the washer-dryer ............................................................................. Control panel ....................................................................................................... How the control panel works ....................................
Contents 4. Selecting programme settings ........................................................................ 5. Adding detergent............................................................................................. 6. Programme start/finish .................................................................................... After each washing or drying programme ........................................................... 49 50 50 50 Rinse out fluff programme....................................
Contents Refitting the transit bars ...................................................................................... Installing under a continuous worktop ................................................................ Levelling the washer-dryer .................................................................................. The Miele water protection system .................................................................... Water intake ............................................................
Caring for the environment Disposal of the packing material Disposing of your old appliance The transport and protective packaging has been selected from materials which are environmentally friendly for disposal, and can normally be recycled. Electrical and electronic appliances often contain valuable materials. They also contain specific materials, compounds and components, which were essential for their correct function and safety.
Warning and Safety instructions It is essential to read these instructions. This washer-dryer complies with all current local and national safety requirements. However, inappropriate use can lead to personal injury and damage to property. Read the operating instructions carefully before using the washerdryer. They contain important information on safety, installation, use and maintenance of the appliance. This prevents both personal injury and damage to the washer-dryer.
Warning and Safety instructions All other types of use are not permitted. Miele cannot be held liable for damage resulting from incorrect or improper use or operation. The washer-dryer is not intended for outdoor use. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning its use by a person responsible for their safety.
Warning and Safety instructions The electrical safety of this appliance can only be guaranteed when continuity is complete between it and an effective earthing system which complies with current local and national safety regulations. It is essential that this standard safety requirement is observed and regularly tested. If in any doubt, have the electrical installation inspected by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g.
Warning and Safety instructions The Miele water protection system protects from water damage provided the following conditions are met: - The machine is correctly plumbed in and connected to the electricity supply. - If a fault or damage has been identified, the washer-dryer must be repaired by a competent person before further use. The machine must only be connected to the on-site water supply using a new hose kit. Old hose kits must not be re-used.
Warning and Safety instructions The manufacturer’s warranty will be invalidated if the washer-dryer is not repaired by a service technician authorised by Miele. In areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the machine and its surroundings in a clean condition at all times. Any damage which may be caused by cockroaches or other vermin will not be covered by the machine warranty.
Warning and Safety instructions Correct use Warning: Risk of fire / Flammable materials. To avoid the possible danger of fire, please read these warnings carefully. Do not install the washer-dryer in rooms that are subject to frost. Frozen hoses may burst or split, and the reliability of the electronic control unit may be impaired at temperatures below freezing point.
Warning and Safety instructions Risk of burning or scalding due to hot temperatures. The metal cap located on the inside of the door glass will be hot after drying. Open the door wide after drying. Do not touch the metal cap. Fabric softener and similar products must be used according to the instructions on the manufacturer's packaging. If the correct amount of detergent is dispensed, the washer-dryer should not need to be descaled.
Warning and Safety instructions To prevent the risk of fire, the following textiles must never be dried in this washer-dryer: - Items which have been cleaned using chemicals (e.g. professional dry-cleaning agents). - Fabrics which contain a large proportion of rubber, foam rubber or rubber-like materials. For example, products made from latex foam rubber, shower caps, waterproof textiles, rubberised articles and items of clothing and pillows with foam rubber filling.
Warning and Safety instructions Fabrics that have been pre-treated in solvent-based cleaning agents must be thoroughly rinsed in clean water before being placed in the machine. Never use solvent based cleaning agents (e.g. one containing benzine) in this washer-dryer. This may result in damage to component parts and create toxic fumes. Risk of fire and explosion! If detergent has come into contact with the eyes, rinse out immediately with plenty of lukewarm water.
Warning and Safety instructions Accessories Only use genuine Miele spare parts and accessories with this machine. Using spare parts or accessories from other manufacturers will invalidate the warranty, and Miele cannot accept liability. Miele will guarantee to supply functional spare parts for a minimum of 10 years and up to 15 years following the discontinuation of your washer-dryer. Miele cannot be held liable for damage caused by non-compliance with these Warning and Safety instructions.
Operating the washer-dryer Control panel 2 1 3 4 5 6 7 8 9 10 11 a Control panel The control panel consists of a time display and various sensors. The individual sensors are explained in the following. b Temperature sensors For selecting the temperature c Spin speed sensors For selecting the spin speed d Extras sensors You can supplement programmes with Extras. When a programme is selected, the sensors for the possible Extras light up.
Operating the washer-dryer i Start/Add laundry sensor – The programme can be started as soon as the sensor is flashing on and off. Touching the Start/Add laundry sensor starts the selected programme. The sensor lights up constantly. – Once the programme has been started, the Start/Add laundry sensor allows you to add laundry. j Optical interface For service technicians. How the control panel works k Delay start sensor with arrow sensors and With Delay start you can delay the start of a programme.
Before the first use Damage resulting from incorrect installation and connection. Installing and connecting the washer-dryer incorrectly will cause serious property damage. Please observe the instructions in “Installation”. Remove the drain hose elbow from the drum An elbow piece for the drain hose is stored in the drum. This washer-dryer has undergone a complete functional test at the factory and there will be some residual water in the drum from this process.
Before the first use Miele@home Your washer-dryer is equipped with an integrated Wi-Fi module. To use this feature, you will need: - a Wi-Fi network - the Miele App - a Miele user account. The user account can be created via the Miele App. The Miele App will guide you as you connect your washer-dryer to your home Wi-Fi network.
Before the first use Setting up Miele@home There are 2 ways of connecting: 1. Via the Miele@mobile App (default) 2. Via WPS Signing on via the Miele@mobile App Useful tip: If the connection has not been set up when the timeout has finished counting down, repeat the process. Running the first wash programme Damage resulting from failure to remove the transit bars. Failure to remove the transit bars can result in damage to the washer-dryer and to adjacent cabinetry or appliances.
Before the first use Opening the door at the end of the programme The door remains locked during the Anti-crease phase. The control panel lights up for the first 10 minutes. The control panel then goes out and the Start/Add laundry sensor flashes. Turn the programme selector to the position. appears in the time display and the indicator light goes out. The door will unlock. Useful tip: After the Anti-crease phase, the washer-dryer switches off. The door is unlocked automatically.
Environmentally friendly washing and drying Energy and water consumption Detergent - Use the maximum load size for the current programme. The energy and water consumption will then be the lowest in relation to the size of the load. - Do not exceed the amounts of detergent recommended by the manufacturer on the packaging. - Programmes that are more efficient with regard to energy and water consumption generally have a longer programme running time.
Washing 1. Preparing the laundry Useful tip: Stains (e.g. blood, egg, coffee, tea) can be pre-treated using some handy tricks which can be found under the "ABC of Stains" on the Miele website. Damage due to solvent-based Empty all pockets. Damage due to foreign objects. Foreign objects (e.g. nails, coins, paper clips etc.) can cause damage to garments and to components in the machine. Check the laundry before washing and remove any foreign objects.
Washing 2. Loading the drum Closing the door Opening the door Reach under the door grip and pull the door open. Make sure that no items are caught between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry. Unfold the laundry and load loosely in the drum. Mixing both large and small items gives better wash results and helps distribute the load evenly during spinning. The most efficient use of energy and water is achieved when a full load is washed.
Washing 3. Selecting a programme Switching the washer-dryer on Turn the programme selector to a programme. The control panel lights up. Selecting a programme Useful tip: In order to use MobileStart , the washer-dryer must be logged on to the Wi-Fi network and Remote control must be switched on. appears in the time display. Once the programme has started, the washer-dryer can be operated with the Miele@mobile App.
Washing Selecting the temperature and spin speed The wash programme's preset temperature and spin speed light up brightly. The choice of temperatures and spin speeds selectable for the wash programme light up dimly. The temperatures reached in the wash programme might not be the same as the temperatures selected. The combination of energy input and washing time achieves an optimum washing result. Gentle Drum rotation and wash duration are reduced. Lightly soiled fabrics are washed more gently.
Washing 4. Adding detergent Adding fabric softener Detergent can be dispensed via the detergent dispenser drawer or via CapDosing . Detergent dispenser drawer Any detergent suitable for automatic front loading washing machines can be used with this appliance. Please observe the instructions for use and dosage on the detergent packaging. Adding detergent Add the fabric softener or the liquid starch to the compartment. Do not exceed the maximum level mark.
Washing Tips on dosing Using detergent tablets or pods Adjust the detergent dosage to the level of soiling of the laundry and the size of the load. Reduce the amount of detergent with smaller load sizes (e.g. reduce the amount of detergent by ¹⁄₃ when washing a half load). Always put detergent tablets or pods directly in the drum with the laundry. They cannot be added via the detergent dispenser drawer.
Washing CapDosing CapDosing can only be activated via the Miele@mobile App. Inserting a capsule Open the detergent dispenser drawer. Three different types of capsules are available: = Fabric care (e.g. fabric softener, proofing agent) = Additives (e.g. detergent enhancers) = Detergent (for the main wash only) Each capsule contains the correct amount for one wash cycle. Open the lid of the / compartment. Caps are available from shop.miele.
Washing Remove the empty capsule at the end of the wash programme. For technical reasons, a small amount of water will remain in the capsule. Close the lid and press it firmly shut. Close the detergent dispenser drawer. The capsule is opened by the act of inserting it in the detergent dispenser drawer. The contents can run out of the capsule if you then remove it from the detergent drawer before it is used. In this case, dispose of the capsule and do not re-use it.
Washing 5. Starting the programme Touch the flashing Start/Add laundry sensor. The door will lock and the programme will start. If a Delay start time has been selected, this counts down in the time display. At the end of the Delay start period or immediately after the programme has started, the programme running time will appear in the time display.
Washing Check the folds in the door seal for any small articles, e.g. buttons, which might be lodged there. Useful tip: For safety reasons, close the door when the machine is not in use. Otherwise there is a danger of objects being placed inadvertently in the drum. If these remain unnoticed and were washed in the next load, they could damage the laundry. An open door is also a danger to pets and children. If applicable, remove the used capsule from the detergent dispenser drawer.
Washing Omitting the final spin (Rinse hold) Touch the sensor (Rinse hold). The laundry is not spun after the final rinse and remains in the rinse water. This helps prevent creasing if the laundry is not going to be removed from the drum immediately after the end of the programme. Deselecting the interim spin and the final spin Touch the sensor (no spin). After the last rinse, the water will be pumped away and the Anti-crease phase will switch on.
Washing Programme chart ECO 40-60 Max. load 8.0 kg Items Normally soiled cotton garments. Notes - A laundry load consisting of mixed cottons that are intended for washing at 40°C or 60°C can be washed in the same wash cycle. - This programme is the most efficient in terms of energy and water consumption for washing cottons. Energy labelling programme according to AS/NZS 2040.1 & AS/NZS 2040.2 (refer to www.energyrating.gov.au website for consumption data), with default settings (i.e.
Washing Rinse/Spin Max. load 8.0 kg Items Rinsing and spinning hand-washed items Notes - Make sure you select the appropriate spin speed. - Spin only: select the Short Extra. - Rinse only: set spin speed to . MobileStart Notes The Miele App is used for selecting programmes and operating the machine. Express Items Cold to 40°C Max. load 3.5 kg Cotton garments that have hardly been worn or are only very lightly soiled. Dark garments/ Denim Cold to 60°C Max. load 3.
Washing Programme sequence Main wash ECO 40-60 Cottons Rinses Spin cycle Water level Wash rhythm Water level Rinses 2–3 2 1,2 2 2 2-4 Minimum iron 2-3 Delicates 2-3 Woollens 2 – – 1 1 Rinse/Spin Express 2 Dark garments 3-4 Shirts 3 Please see the next page for a description of the symbols.
Washing = low water level = medium water level = high water level = intensive rhythm = normal rhythm = sensitive rhythm = handwash rhythm = carried out – = not carried out This washer-dryer has fully electronic controls with automatic load recognition. It takes in the right amount of water required for the programme depending on the amount of laundry and its absorbency rate.
Washing Detergent Detergent dispensing aids Any detergent suitable for automatic front loading washing machines can be used with this appliance. Follow the manufacturer's instructions and dosage recommendations on the packaging. Use dispensing aids (e.g. balls) if these are supplied with the detergent, particularly when using liquid detergent.
Washing Using fabric softener, liquid starch or starch separately Prepare the starch in accordance with the manufacturer's instructions on the packaging. Add fabric softener to the compartment. Add liquid starch to the compartment and powder or viscous starch to the compartment. Select the Rinse/Spin programme. Change the spin speed if necessary. Touch the Start/Add laundry sensor. Colour run and dye removers/dyes Damage due to colour run/dye removers.
Washing Miele detergents Miele detergents have been specially designed for everyday use in Miele washing machines. See “Detergents and care products” for more information about these detergents.
Washing The recommendations apply to the temperature ranges given in the section "Washing" in the Programme chart.
Drying Separate drying The separate drying programme should be run if the load in the wash programme is greater than the maximum load permitted for drying, or if you only want to dry part of the load that was washed. 1. Preparing the laundry Sorting the laundry Sort the laundry according to type of fibre/weave, size, garment care label symbol, and the drying level required. This will help you to achieve an even drying result. Before drying, check the drying symbol on the care label.
Drying 2. Loading the drum 3. Selecting a programme Opening the door Switching the washer-dryer on Reach under the door grip and pull the door open. Turn the programme selector to a programme. Check the drum for pets or foreign objects before loading it with laundry. The control panel lights up. Selecting a programme Load the laundry loosely in the drum. Overloading places a strain on the textiles and affects drying results. Observe the maximum loads listed in the Programme chart.
Drying Useful tip: In order to use MobileStart , the washer-dryer must be logged on to the Wi-Fi network and Remote control must be switched on. appears in the time display. Once the programme has started, the washer-dryer can be operated with the Miele@mobile App. Selecting a thermospin spin speed The preset spin speed for the thermospin can be changed if required. Touch the sensor for the spin speed you want. The sensor lights up brightly.
Drying 5. Starting the programme Touch the flashing Start/Add laundry sensor. The door will lock and the drying programme will start. If a Delay start time has been selected, this counts down in the time display. At the end of the Delay start period or immediately after the programme has started, the programme running time will appear in the time display.
Drying Programme chart * Weights are based on the weight of dry laundry. ECO 40-60 Max. load 4.0 kg* Drying levels: Cotton textiles: T-shirts, underwear, baby clothes, workwear, jackets, covers, aprons, overalls, hand towels, bath towels, bathrobes and flannelette/bed linen. Energy labelling programme according to AS/NZS 2442.1 & AS/NZS 2442.2 (refer to www.energyrating.gov.au website for consumption data). Cottons Max. load 4.
Drying Delicates Max. load 1.0 kg* Drying levels: , , Items Delicate items with the symbol on the care label made of synthetic fibres, easy care cotton or blended fabric, e.g. shirts, blouses, lingerie and evening wear with sequins and beading. Notes Reducing the load will reduce creasing. Woollens Max. load 2.0 kg* 3 minutes Items Woollen garments and textiles containing wool blends, e.g. pullovers, cardigans, stockings.
Drying Shirts Max. load 1.0 kg* Drying levels: , , Items Shirts and blouses. Notes Turn shirts and blouses inside out, do up buttons and turn collars and cuffs inwards. Warm air Max. load 4.0 kg* 20–120 minutes Items - Multi-layered items whose layers have different drying characteristics, e.g. jackets, pillows, sleeping bags and other voluminous items. - For drying and airing individual items. Notes Do not select the longest drying time to start with.
Washing and Drying Washing and drying in one continuous sequence It is advisable to wash and dry in a continuous sequence when the amount of laundry to be washed does not exceed the amount to be dried, and the amount to be dried does not exceed the permitted dry weight for the programme. It is essential to read the sections “Washing” and “Drying”. 1. Preparing the laundry Empty all pockets. Sort the laundry according to colour and type of fibre/weave. Check the symbols on the care labels. 2.
Washing and Drying 5. Adding detergent Dispense detergent with CapDosing or via the detergent dispenser drawer. After each washing or drying programme Open the drum door fully. 6. Programme start/finish Risk of burning due to hot metal. Touch the flashing Start/Add laundry sensor. The metal cap located on the inside of the door glass will be hot after drying. Do not touch the metal cap. The door will lock. The programme will start. The Anti-crease phase will start at the end of the programme.
Rinse out fluff programme During drying, fluff is developed and can collect in the drum and suds container. Run the Rinse out fluff programme before the machine is used again so that fluff cannot be deposited on the next load or cause a blockage. The Rinse out fluff programme must not be used for rinsing laundry. Ensure there are no items of laundry in the drum before starting the programme. Turn the programme selector to the Rinse out fluff programme. Do not use detergent.
Changing the programme sequence Changing the programme (safety lock) Pull the door open and unload the drum. It is not possible to change the programme, the temperature, the spin speed or the selected Extras after the programme has started. This prevents the appliance being operated unintentionally, e.g. by children. Selecting another programme If the washer-dryer is switched off during active programme operation, the standby function does not switch the washer-dryer off completely after 15 minutes.
Changing the programme sequence Adding laundry - AddLoad You can add or remove items during the first few minutes after the programme has started. Laundry cannot be added if the symbol is illuminated in the display. Touch the Start/Add laundry sensor. Rotating bars ... ... appear in the time display. appears in the time display. Open the door. Add or remove laundry. Close the door. Touch the Start/Add laundry sensor. The programme will continue.
Delay start/SmartStart Delay start Delay start is active when the SmartGrid programmable function is switched off. With Delay start you can delay the start of a programme from 30 minutes up to a maximum of 24 hours. This allows you to make use of night-time economy electricity rates, for example. Setting the Delay start time Select the programme required. Touch the sensor. Starting Delay start Touch the flashing Start/Add laundry sensor.
Delay start/SmartStart SmartStart (only functional in selected countries) The SmartStart function is active when the SmartGrid programmable function is switched on. The SmartStart function lets you define a time period during which your washer-dryer will start automatically based on an external signal. The machine will start on receipt of a signal, e.g. from your energy supplier, that indicates that the electricity rate is particularly economical.
Cleaning and care Cleaning the external casing and fascia panel Risk of electric shock. The mains voltage is applied to the washer-dryer even if it is switched off. Disconnect the machine from the electricity supply before cleaning or maintenance. Cleaning the detergent dispenser drawer Washing at low temperatures and the use of liquid detergent can lead to a build-up of mould and bacteria in the detergent dispenser drawer. For hygiene reasons, clean the entire drawer at regular intervals.
Cleaning and care Cleaning the siphon and the channel Pull the siphon out of the compartment and clean it under warm running water. Clean the siphon tube in the same way. Refit the siphon. Cleaning the detergent dispenser drawer housing Use a bottle brush to remove detergent residues and limescale from the jets inside the detergent dispenser drawer housing. Replace the detergent dispenser drawer. Useful tip: Leave the detergent dispenser drawer slightly open to allow it to dry.
Cleaning and care Cleaning the porthole glass Clean the inside of the porthole glass from time to time and the metal cap inside the porthole glass with a suitable mild cleaning agent or with soapy water. Dry both with a soft cloth. Cleaning the drum Washing at low temperatures and/or using liquid detergent can cause bacteria and unpleasant odours to build up in the washer-dryer. Use the Cottons 90°C programme to clean the washerdryer.
Problem solving guide With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you won't need a service call. Please note that a call-out charge will be applied to unnecessary service visits where the problem could have been rectified as described in these operating instructions.
Problem solving guide Programme cancellation and fault indicator light Problem Possible cause and remedy The fault indicator light lights up. and alternate in the time display and the buzzer sounds. The water inlet is blocked or restricted. Check whether the tap is turned on properly. Check whether the inlet hose is kinked. Check whether there is sufficient water pressure. The fault indicator light lights up. and alternate in the time display and the buzzer sounds.
Problem solving guide Fault indicator light lights up at the end of a programme Problem Possible cause and remedy The indicator light lights up. Excessive foam has built up during washing. Use less detergent next time and follow the manufacturer's instructions on dosage given on the packaging. The indicator light lights up and appears in the time display. A wash programme using a temperature above 60°C has not been run for a long time.
Problem solving guide During the programme, a symbol appears in the time display Message Possible cause and remedy lights up briefly in The washer-dryer is indicating that it is networked. the time display when a programme is selected. lights up in the time display when the MobileStart programme is selected. The remote control function is switched off. Activate the remote control programmable function to operate the washer-dryer via the App.
Problem solving guide General problems with the washer-dryer Problem Possible cause and remedy The display is dark. The display has switched off automatically to save energy (Standby mode). Press any button. This switches Standby off. The washer-dryer is not The machine feet are not level. steady during a spin Level the machine and adjust the feet correctly. cycle. Unusual pumping noises. This is not a fault. Slurping noises occur at the end of the pump sequence as a normal part of operation.
Problem solving guide General problems with the washer-dryer Problem Possible cause and remedy Fabric softener is not completely dispensed or too much water remains in the compartment. The siphon tube is not correctly positioned or clogged. Clean the siphon (see “Cleaning and care Cleaning the detergent dispenser drawer”). There is water in the fabric softener compartment next to the capsule. CapDosing was not activated or an empty capsule was not removed at the end of the last wash programme.
Problem solving guide General problems with the washer-dryer Problem Possible cause and remedy Foam comes out of the detergent dispenser drawer while the Rinse out fluff programme is running. There is residual detergent from the last programme in the suds container. Make sure you always dispense the correct amount of detergent. Follow the detergent manufacturer's dosage recommendations. There is foam in the drum at the end of the Rinse out fluff programme.
Problem solving guide An unsatisfactory wash result Problem Possible cause and remedy White residues which look like powder detergent are seen on dark textiles after washing. The detergent contains compounds (zeolites) to aid water softening which are not soluble in water. These have ended up on the laundry. Try and brush off the residues with a soft brush once the laundry is dry. In the future, wash dark textiles with a detergent which contains no zeolites.
Problem solving guide Unsatisfactory drying result Problem Possible cause and remedy The laundry is too damp The load is too small. The electronics could not after a drying cycle. assess the residual moisture correctly. In the future, use the Warm air programme for small amounts of laundry. During the spin cycle, the laundry formed a ring in the drum because the laundry was distributed unevenly.
Problem solving guide The door will not open Problem Possible cause and remedy The door cannot be opened while a programme is running. The door is locked during a programme. Follow the instructions in “Changing the programme sequence – Adding laundry”. There is still water in the drum and the washer-dryer is unable to drain. Clean the drain filter and the drain pump as described in “Opening the door in the event of a blocked drain outlet and/or power cut”. The water level in the drum is too high.
Problem solving guide Opening the door in the event of a blocked drain outlet and/ or power cut Switch the washer-dryer off. Open the drain pump access panel. Blocked drain outlet If the drain outlet is blocked, a large quantity of water can remain in the washer-dryer. Risk of scalding due to hot suds. Escaping suds will be hot if laundry has been washed at high temperatures. Drain the suds carefully. Slowly and carefully unscrew the filter to let the water out.
Problem solving guide Cleaning the drain filter Clean the drain filter thoroughly. Remove any foreign objects (e.g. buttons, coins, etc.) and clean the interior. Turn the impeller by hand to check that they rotate freely. Put the drain filter back in place and secure it. Risk of damage from leaking water. Water will escape from the washerdryer if you forget to replace the drain filter. Replace the drain filter correctly and tighten it securely.
Service Contact in case of fault Warranty In the event of any faults which you cannot remedy yourself, please contact Miele. The manufacturer's warranty for this appliance is 2 years. You can book a Miele customer service call-out online at www.miele.com.au/service or www.miele.co.nz/service. Contact information for Miele can be found at the end of this booklet. For further information, please refer to your warranty booklet.
Garment care label symbols Washing The figure quoted in the bucket is the maximum temperature at which the garment can be washed. Drying Normal temperature Low temperature Do not tumble dry Normal agitation Reduced agitation Much reduced agitation Approx. 200 °C Hand wash Approx. 150 °C Do not wash Approx. 110 °C Programme selection examples Programme Ironing Ironing with steam can cause irreversible damage.
*INSTALLATION* Installation Front view a Water inlet hose e Detergent dispenser drawer b Electrical connection f Door c Flexible drain hose (with detachable swivel elbow) g Access to drain filter, drain pump and emergency release d Control panel h 4 height-adjustable feet 73
*INSTALLATION* Installation Rear view a Protruding lid for holding when moving the machine d Safety caps for transit bars b Drain hose e Transport clips for water inlet hoses and drain hoses c Water inlet hose f Electrical connection 74
*INSTALLATION* Installation Installation surface A concrete floor is the most suitable installation surface. It is far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note: The washer-dryer must be level and securely positioned. To avoid vibrations during spinning the washer-dryer must not be installed on soft floor coverings. If installing on a wooden joist floor, please note: Check for the presence of pipes and cables first.
*INSTALLATION* Installation Then pull the transit bar out. Then pull the transit bar out. Removing the right transit bar Covering the holes Risk of injury from sharp edges! There is a risk of injury from reaching into holes that are not covered. The holes for the transit bars must be covered after the transit bars have been removed. Push the flap outwards and turn the transit bar 90° using the enclosed spanner. Press the flaps firmly shut until they click into place.
*INSTALLATION* Installation Refitting the transit bars Risk of damage from incorrect transport. The washer-dryer may become damaged if moved without the transit bars in place. Keep the transit bars in a safe place. Fit them again if the washer-dryer is to be moved (e.g. when moving house). Opening the flaps Installing under a continuous worktop Building under kits* must only be installed/dismantled by a specialist. - A special building under kit* is required.
*INSTALLATION* Installation Levelling the washer-dryer The washer-dryer must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. The appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the appliance, in such a way that a full opening of the appliance door is restricted.
*INSTALLATION* Installation The Miele water protection system The water protection system protects all parts of the washer-dryer from water damage. The system consists of three main components: - the inlet hose - the electronic unit, and the drainage and overflow protection - the drain hose Inlet hose - Protected from bursting The inlet hose can withstand pressure of more than 7000 kPa. Electronic unit and machine housing - Sump Any leaking water is collected in a sump in the base of the machine.
*INSTALLATION* Installation Water intake Health risk and risk of damage due to contaminated incoming water. The quality of the water used must correspond to the drinking water specification of the country in which the appliance is being operated. Always connect the appliance to potable water. The washer-dryer must be connected to a mains water supply in accordance with current local and national safety regulations.
*INSTALLATION* Installation Drainage Connecting to a washbasin The suds are drained through a drain pump with a 1 m delivery head. For the water to drain freely, the hose must be installed free of kinks. The elbow piece supplied hooks onto the end of the hose. If required, the hose can be extended to a length of up to 5 m. The necessary parts can be purchased from Miele. For a delivery head of more than 1 m (up to a max. of 1.8 m) a replacement drain pump will need to be fitted.
*INSTALLATION* Installation Electrical connection The washer-dryer is supplied with a mains cable with moulded plug ready for connection to a 230V electricity supply. The voltage, rated load and plug rating are given on the data plate. Please ensure these match the household mains supply. The socket must be easily accessible after the washer-dryer has been installed. If the switch is not accessible after installation an additional means of disconnection must be provided for all poles.
Technical data Height 850 mm Width 596 mm Depth 637 mm Depth with door open 1055 mm Height for building under 820 (+8/-2) mm Width for building under 600 mm Weight Approx. 95 kg Capacity, washing Capacity, drying 8.0 kg dry laundry 4.0 kg dry laundry Supply voltage see data plate Rated load see data plate Fuse rating see data plate Minimum water flow pressure 100 kPa (1 bar) Maximum water flow pressure 1000 kPa (10 bar) Water inlet hose length 1.55 m Drain hose length 1.
1.22 2.03 0.23 0.33 0.32 0.35 1.35 Short Extra activated Maximum laundry temperature reached in main wash.
Programmable functions The programmable functions are used to alter the washer-dryer’s electronics to suit changing requirements. Programmable functions can be altered at any time. Programming is carried out in 9 steps (, , ... ) using the sensors. Opening the programming level Choosing and selecting programmable functions The number of the programmable function will appear in the display as and a number: e.g. .
Programmable functions Editing and saving the programmable function The number of the programmable function, e.g. , will light up again. You can switch a programmable function on/off or select different options. Exiting the programming level Turn the programme selector to the position. Touch the or sensor to switch a programmable function on/off or to select an option.
Programmable functions PIN code The PIN code prevents your washerdryer being used without your knowledge. When the PIN code has been activated, you have to enter the code after switching the washer-dryer on. Otherwise the washer-dryer cannot be operated. Options = Off (factory default) = On If the option has been selected, you will have to enter the PIN code before you can operate the washer-dryer. Using the washer-dryer when the PIN code is activated The code is 125 and cannot be altered.
Programmable functions Memory The washer-dryer will save the last settings selected for a programme (temperature, spin speed) after the programme has started. Gentle action With Gentle action activated, drum agitation is reduced. In this way, lightly soiled items can be washed more gently. The next time the programme is selected these saved settings will appear in the display. Gentle action can be activated for the Cottons and the Minimum iron wash programmes.
Programmable functions Maximum rinse level The water level in the rinses can be permanently set to the highest value in the Cottons and Minimum iron programmes. This function is important for allergy sufferers as it achieves excellent rinse results. The water consumption will be increased. Options Display brightness The brightness of the dimmed sensors in the control panel can be set to one of 7 different levels. The brightness will change as soon as a different setting is chosen.
Programmable functions Minimum iron drying levels You can adjust the drying levels for the Minimum iron programme if needed. Options = damper Compressed laundry protection The maximum final spin speed can be limited to prevent laundry forming a ring around the drum. = drier The Compressed laundry protection setting is only effective with continuous washing and drying.
Programmable functions Remote control You can use the Miele@mobile App to check the status of your washer-dryer from anywhere and start it remotely. You can also control it remotely via the MobileStart programme. You can switch off the programmable function if you do not want to operate the washer-dryer with your mobile device. If the programmable function is not switched on, the App can still be used to cancel the programme.
Programmable functions The message will appear in the time display if an update is available. You can install the update immediately or postpone this until later. When the washer-dryer is switched on again, you will be reminded about the update. The update may take several minutes. Please note the following about the RemoteUpdate function: - You will only receive a message when an update is available. - Once an update has been installed, it cannot be undone.
Programmable functions Switching off Wi-Fi Turn the programme selector to the MobileStart programme. appears in the time display. Touch and hold the sensor until the countdown in the time display has finished. appears in the time display. - The Wi-Fi is switched off. - The Wi-Fi connection will be reset to the factory setting. The network configuration should be reset whenever a washer-dryer is being disposed of or sold, or if a used washer-dryer is being put into operation.
Detergents and care products Detergent, fabric care, additives and machine care products are available for this machine. All the products have been designed for Miele appliances. These and many other useful products can be ordered via the internet at shop.miele.com (depending on country) or from Miele (see end of this booklet for contact details).
Detergents and care products Specialist detergents Caps CottonRepair These specialist detergents are available as convenient single-use capsules.
Detergents and care products Additive Machine care products The additive is available as a convenient single-use capsule.
Miele Australia Pty. Ltd.
WTD 160 en-AU, NZ M.-Nr.
