User Manual

Delay start/SmartStart
55
SmartStart (only functional in
selected countries)
The SmartStart function is active when
the  SmartGrid programmable
function is switched on.
The SmartStart function lets you define
a time period during which your
washer-dryer will start automatically
based on an external signal. The
machine will start on receipt of a signal,
e.g. from your energy supplier, that
indicates that the electricity rate is
particularly economical.
The timeframe can be defined between
30minutes and 24hours. During this
period, the washer-dryer waits for the
external signal. If no signal is sent
during the defined period, the washer-
dryer starts the programme.
Setting the timeframe
If the SmartGrid programmable
function is activated, the function of
the sensor changes. The time
display no longer shows the Delay
start period, and instead shows the
time period in which your washer-
dryer can be started automatically
(see “Programmable functions –
SmartGrid”).
The procedure for setting this is the
same as for setting the time for Delay
start.
 Touch the  sensor.
 Set the time period you want using
the  or sensor.
 Touch the Start/Add laundrysensor.
 appears in the time display.