User Manual

Problem solving guide
60
Programme cancellation and fault indicator light
Problem Possible cause and remedy
The fault indicator
light lights up.  and
 alternate in the time
display and the buzzer
sounds.
The water inlet is blocked or restricted.
 Check whether the tap is turned on properly.
 Check whether the inlet hose is kinked.
 Check whether there is sufficient water pressure.
The filter in the water inlet is blocked.
 Clean the filter.
The fault indicator
light lights up.  and
 alternate in the time
display and the buzzer
sounds.
The water outlet is blocked or restricted.
The drain hose has been fixed too high.
 Clean the drain filter and the drain pump.
 Check whether the maximum delivery height of
1m has been exceeded.
The fault indicator
light lights up.  and
 alternate in the time
display and the buzzer
sounds.
The water protection system has reacted.
 Turn off the tap.
 Call Miele.
 and  alternate in
the time display and the
buzzer sounds.
There is a fault.
 Disconnect the washer-dryer from the electricity
supply. Switch off at the wall and withdraw the
plug from the socket, or switch off the mains
circuit breaker.
 Wait at least 2minutes before reconnecting the
washer-dryer to the electricity supply.
 Switch the washer-dryer back on.
 Restart the programme.
 If the fault message appears again, contact Miele.