User Manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the washer-dryer
- Before the first use
- Environmentally friendly washing and drying
- Washing
- Drying
- Washing and Drying
- Rinse out fluff programme
- Changing the programme sequence
- Delay start/SmartStart
- Cleaning and care
- Problem solving guide
- A programme cannot be started
- Programme cancellation and fault indicator light
- Fault indicator light lights up at the end of a programme
- During the programme, a symbol appears in the time display
- General problems with the washer-dryer
- General problems with the washer-dryer
- General problems with the washer-dryer
- An unsatisfactory wash result
- Unsatisfactory drying result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Garment care label symbols
- Installation
- Technical data
- Consumption data
- Programmable functions
- Choosing and selecting programmable functions
- Editing and saving the programmable function
- Exiting the programming level
- PIN code
- switch-off status
- Memory
- Gentle action
- Temperature reduction
- Maximum rinse level
- Suds cooling
- Display brightness
- Cottons drying levels
- Minimum iron drying levels
- Extended cool down
- Compressed laundry protection
- Remote control
- SmartGrid (only functional in selected countries)
- RemoteUpdate
- Switching off Wi-Fi
- Copyright and licences for the communication module
- Detergents and care products
Problem solving guide
69
Opening the door in the event
of a blocked drain outlet and/
or power cut
Switch the washer-dryer off.
Open the drain pump access panel.
Blocked drain outlet
If the drain outlet is blocked, a large
quantity of water can remain in the
washer-dryer.
Risk of scalding due to hot suds.
Escaping suds will be hot if laundry
has been washed at high
temperatures.
Drain the suds carefully.
Draining water from the machine
Remove the drain filter, though not
completely.
Place a suitable container under the
access panel, e.g. a universal oven
tray.
Slowly and carefully unscrew the filter
to let the water out. Be careful not to
release too much water at once. If the
flow of water is too strong, some
water can seep into the machine
base and activate the water
protection float switch. This will
prevent the machine from
functioning.
Tighten the drain filter back up again
if you need to interrupt the flow of
water.
Once the flow of water ceases:
Remove the drain filter completely.










