User Manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the washer-dryer
- Before the first use
- Environmentally friendly washing and drying
- Washing
- Drying
- Washing and Drying
- Rinse out fluff programme
- Changing the programme sequence
- Delay start/SmartStart
- Cleaning and care
- Problem solving guide
- A programme cannot be started
- Programme cancellation and fault indicator light
- Fault indicator light lights up at the end of a programme
- During the programme, a symbol appears in the time display
- General problems with the washer-dryer
- General problems with the washer-dryer
- General problems with the washer-dryer
- An unsatisfactory wash result
- Unsatisfactory drying result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Garment care label symbols
- Installation
- Technical data
- Consumption data
- Programmable functions
- Choosing and selecting programmable functions
- Editing and saving the programmable function
- Exiting the programming level
- PIN code
- switch-off status
- Memory
- Gentle action
- Temperature reduction
- Maximum rinse level
- Suds cooling
- Display brightness
- Cottons drying levels
- Minimum iron drying levels
- Extended cool down
- Compressed laundry protection
- Remote control
- SmartGrid (only functional in selected countries)
- RemoteUpdate
- Switching off Wi-Fi
- Copyright and licences for the communication module
- Detergents and care products
Warning and Safety instructions
8
The electrical safety of this appliance can only be guaranteed
when continuity is complete between it and an effective earthing
system which complies with current local and national safety
regulations.
It is essential that this standard safety requirement is observed and
regularly tested. If in any doubt, have the electrical installation
inspected by a qualified electrician.
Miele cannot be held liable for the consequences of an inadequate
earthing system (e.g. electric shock).
Do not connect the washer-dryer to the mains electricity supply
by a multi-socket adapter, extension lead or similar. These do not
guarantee the required safety of the machine (fire hazard due to the
risk of overheating).
Unauthorised repairs could result in unforeseen dangers for the
user, for which the manufacturer cannot accept liability. Repairs
should only be carried out by a Miele authorised service technician,
otherwise any subsequent damage will not be covered by the
warranty.
Please observe the instructions in “Installation” and “Technical
data”.
The electrical plug must be easily accessible after installation so
that the washer-dryer can be disconnected from the electricity
supply if necessary.
In the event of a fault or for cleaning purposes, the washer-dryer
must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:
- switched off at the wall socket and the power plug is withdrawn
from the socket
- the mains circuit breaker has been switched off, or
- the screw-out fuse is removed (in countries where this is
applicable).