User Manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the washer-dryer
- Before the first use
- Environmentally friendly washing and drying
- Washing
- Drying
- Washing and Drying
- Rinse out fluff programme
- Changing the programme sequence
- Delay start/SmartStart
- Cleaning and care
- Problem solving guide
- A programme cannot be started
- Programme cancellation and fault indicator light
- Fault indicator light lights up at the end of a programme
- During the programme, a symbol appears in the time display
- General problems with the washer-dryer
- General problems with the washer-dryer
- General problems with the washer-dryer
- An unsatisfactory wash result
- Unsatisfactory drying result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Garment care label symbols
- Installation
- Technical data
- Consumption data
- Programmable functions
- Choosing and selecting programmable functions
- Editing and saving the programmable function
- Exiting the programming level
- PIN code
- switch-off status
- Memory
- Gentle action
- Temperature reduction
- Maximum rinse level
- Suds cooling
- Display brightness
- Cottons drying levels
- Minimum iron drying levels
- Extended cool down
- Compressed laundry protection
- Remote control
- SmartGrid (only functional in selected countries)
- RemoteUpdate
- Switching off Wi-Fi
- Copyright and licences for the communication module
- Detergents and care products
Consumption data
84
Programmes Load Energy Water Duration
Temperature
1
Residual
moisture Spin speed
kg kWh Litres h:min °C % rpm
Washing
Cottons 60 8.0 1.35 57 2:29 54 51 1500
20 8.0 0.35 72 2:39 20 51 1500
Minimum iron 30 3.5 0.32 47 1:59 30 30 1200
Express
2
40 3.5 0.33 30 0:20 27 60 1200
Woollens 30 2.0 0.23 35 0:39 – – –
Drying
Cottons 4.0 2.03 17 2:06 – – –
Minimum iron 3.5 1.22 11 1:21 – – –
1
Maximum laundry temperature reached in main wash.
2
Short Extra activated
Information for customers:
Consumption data can vary from the nominal values listed depending on water pressure, water hardness, water inlet temperature, room
temperature, type and volume of load, fluctuations in the electricity supply and any Extras selected.










