User Manual

Programmable functions
87
 PIN code
The PIN code prevents your washer-
dryer being used without your
knowledge.
When the PIN code has been activated,
you have to enter the code after
switching the washer-dryer on.
Otherwise the washer-dryer cannot be
operated.
Options
 = Off (factory default)
 = On
If the option has been selected, you
will have to enter the PIN code before
you can operate the washer-dryer.
Using the washer-dryer when the PIN
code is activated
The code is 125 and cannot be altered.
 Switch the washer-dryer on.
  appears in the time display and
the and sensors light up.
 Touch the  sensor.
 appears in the time display.
 Confirm the number with the Start/
Add laundry sensor.
The first number has been saved.
 Enter the second and third numbers
using the  and sensors and
confirm the numbers with the Start/
Add laundry sensor.
The lock function is deactivated.
 Display switch-off status
To save energy, the time display and
sensors will go out after 10 minutes,
and only the Start/Stop sensor will
flash slowly.
Options
 = Off
The time display and sensors
will remain lit up while the
washer-dryer is switched on.
 = On (factory default)
The time display and sensors
will switch off 10minutes after
the programme has started.
However, the time display and
sensors will remain lit up for 10
minutes after a Delay start time
has elapsed, after the end of a
programme, or at the end of
the Anti-crease phase.