Operation Manual
DRYING
52
Select "Drying".
Touch theWashing and Drying sensor
until just the Drying indicator light re-
mains on.
The Washing indicator light must not
be lit up, as this would mean that the
relevant washing programme would
begin before the drying process.
The maximum (dry) load for the drying
programme selected will appear in the
display. This will then be replaced by
the standard display.
3. Load the drum
Open the door
Reach under the door grip and pull
the door open.
Check the drum for pets or foreign
objects before loading it with laun-
dry.
Load the laundry loosely in the drum.
Overloading places a strain on the
textiles and affects drying results.
Observe the maximum loads given in
the "Programme chart".
Close the door
Make sure that no items are caught
between the door and the seal.
Shut the door with a gentle swing.
Detergent dispensing aids, e.g.
plastic dispenser balls, can melt dur-
ing the drying programme and cause
damage to the machine and the
laundry.
These dispensing aids must be re-
moved from laundry before drying.
The water supply stopcock must be
kept open for drying.