Operating instructions for washing machines To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en-GB, IE M.-Nr.
Contents Caring for the environment .............................................................................. 6 Warning and Safety instructions ..................................................................... 7 Operating the washing machine ...................................................................... 14 Control panel ....................................................................................................... 14 How the control field works...................................
Contents Programme sequence....................................................................................... 42 Changing the programme sequence .............................................................. 44 Changing a programme (safety lock) .................................................................. 44 Cancelling a programme ..................................................................................... 44 Detergent .....................................................................
Contents Installation.......................................................................................................... Front view ............................................................................................................ Rear view............................................................................................................. Installation surface ..............................................................................................
Contents UltraPhase 1 dispensing quantity ................................................................ UltraPhase 2 dispensing quantity................................................................. TwinDos maintenance .................................................................................. Degree of soiling .......................................................................................... Networking ....................................................................
Caring for the environment Disposing of the packaging material Disposing of your old appliance The packaging material is used for handling and protects the appliance from transport damage. The packaging material used is selected from materials which are environmentally friendly for disposal and can generally be recycled. Electrical and electronic appliances contain many valuable materials.
Warning and Safety instructions This washing machine complies with all current local and national safety requirements. However, inappropriate use can lead to personal injury and damage to property. Read the operating instructions carefully before using the washing machine. They contain important information on safety, installation, use and maintenance. This prevents both personal injury and damage to the washing machine.
Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the washing machine unless they are constantly supervised. Children 8 years and older may only use the washing machine unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation. Children must not be allowed to clean or maintain the washing machine unsupervised.
Warning and Safety instructions Temporary or permanent operation on an autonomous power supply system or a power supply system that is not synchronised with the mains power supply (e.g. island networks, back-up systems) is possible. A prerequisite for operation is that the power supply system complies with the specifications of EN 50160 or an equivalent standard.
Warning and Safety instructions Unauthorised repairs could result in unforeseen dangers for the user, for which the manufacturer cannot accept liability. Repairs should only be undertaken by a Miele authorised service technician, otherwise any subsequent damage will not be covered by the warranty. While the washing machine is under warranty, repairs should only be undertaken by a Miele authorised service technician. Otherwise the warranty will be invalidated.
Warning and Safety instructions Correct use Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point. Before using the machine for the first time, check that the transit bars at the rear of the machine have been removed (see “Installation - Removing the transit bars”).
Warning and Safety instructions If the correct amount of detergent is dispensed, the machine should not need to be descaled. If, however, you do wish to descale it, only use a proprietary natural citric acid based descaling agent. Miele recommends using Miele descaling agent which is available to order online at www.miele.co.uk or from Miele. Strictly observe the instructions on the packaging.
Warning and Safety instructions Accessories and spare parts Only use original Miele accessories. If other parts are used, warranty, performance and product liability claims will be invalidated. A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
Operating the washing machine Control panel a Control field The control field consists of a time display and various sensor controls. The individual sensor controls are explained in the following sections. e Indicator lights Lights up if there are faults affecting the water inlet and drainage. b Sensor controls – temperature for selecting the temperature. c Sensor controls – spin speeds for selecting the spin speed.
Operating the washing machine g Time display After the programme has started, the programme duration will appear in the display in hours and minutes. When Delay start is being used, the programme duration will appear after the Delay start time has elapsed. h Sensor controls The Delay start time selected will appear in the time display. After the programme has started, the Delay start time will begin to count down.
Before using for the first time Damage resulting from incorrect installation and connection. Installing and connecting the washing machine incorrectly will cause serious property damage. See “Installation”. Take the two cartridges and the elbow piece out of the drum. Removing the protective foil and stickers Remove: - Any protective film from the door - Any stickers from the front and the lid Please do not remove any labels (e.g. the data plate) which are visible when you open the door.
Before using for the first time Miele@home Your washing machine is equipped with an integrated WiFi module. In order to use it you need: - a WiFi network - the Miele@mobile App - a Miele user account. The user account can be created via the Miele@mobile App. The Miele@mobile App will guide you as you connect your washing machine to your home WiFi network.
Before using for the first time 1. Remove the transit bars Damage resulting from failure to remove the transit bars. Failure to remove the transit bars can result in damage to the washing machine and to adjacent cabinetry or appliances. Remove the transit bars as described in “Installation and connection”. 2. Setting up Miele@home There are 2 ways of connecting: 1. Via the Miele app (default) 2. Via WPS To do so, you will need a WPS-compatible router.
Before using for the first time 3. Commissioning TwinDos The TwinDos system can only be operated with the Miele UltraPhase 1 and UltraPhase 2 detergent cartridges. It is not possible to use any other detergent in the TwinDos system. The dispensing quantities for UltraPhase 1 and UltraPhase 2 are preset for water hardness level II in the factory default settings. You can change the dispensing quantity. See the “Programmable functions” chapter, “TwinDos” section. Open the access panel for TwinDos.
Before using for the first time 4. Starting the calibration programme For optimum water and energy consumption and excellent wash results, it is important to calibrate the washing machine. To do this, the Cottons programme must be run without laundry and without detergent. Open the stopcock. Opening the door at the end of the programme The door remains locked during the anti-crease phase. The control field lights up for the first 10 minutes.
Washing environmentally and economically Energy and water consumption - To get the most out of your machine, load the maximum dry load size for the wash programme you are using. This will keep the energy and water consumption to a minimum in relation to the size of the load. - Programmes that are more efficient with regard to energy and water consumption generally have a longer running time.
1. Prepare the laundry Tip: Stains (e.g. blood, egg, coffee, tea) can be pre-treated using some handy tricks which can be found in the Miele guide to laundry care. Damage due to solvent-based Empty all pockets. Damage due to foreign objects. Nails, coins, paper clips, and so on can cause damage to garments and components in the machine. Check the laundry before washing and remove any foreign objects. Sort the laundry Sort the laundry by colour and by care label.
2. Select a programme Switching on the washing machine 2. Selecting programmes using the MobileStart programme selector position and the Miele app 1. Selecting wash programmes using the programme selector Tip: To use MobileStart , the washing machine must be logged on to the WiFi network and Remote control must be switched on. Turn the programme selector to a programme. Turn the programme selector to the required programme. The programme running time appears on the time display.
3. Load the washing machine Open the door Close the door Take hold of the door and pull it open. Make sure that no items are caught between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry. The most efficient use of energy and water is achieved when a full load is washed. However, do not overload as this makes cleaning less effective and causes creases. Unfold the laundry and load loosely into the drum.
4. Select programme settings Selecting a temperature and spin speed The wash programme’s preset temperature and spin speed light up brightly. The choice of available temperatures and spin speeds for the wash programme light up dimmed. The temperatures reached inside the washing machine might not be the same as the temperatures selected. Perfect wash results are achieved through a combination of energy use and wash duration.
5. Add detergent There are several options for adding detergent. The washing machine has the TwinDos system. TwinDos has to be activated as described in “Before using for the first time”. The TwinDos system can only be operated with the Miele UltraPhase 1 and UltraPhase 2 detergents. How UltraPhase 1 and UltraPhase 2 work UltraPhase 1 is a liquid detergent which dissolves dirt and removes the most common stains. UltraPhase 2 is a bleaching agent and removes stubborn stains.
5. Add detergent Degree of soiling of the laundry There are 3 different degrees of soiling. The quantity of detergent dispensed via TwinDos and the quantity of water required for rinsing are preset for the normal degree of soiling. - Light No visible soiling or stains - Normal Visibly soiled and/or just a few slight stains. - Heavy Heavily soiled and/or clearly visible stains. Tip: You can change the default degree of soiling using the programmable function.
5. Add detergent Detergent dispenser drawer Adding fabric conditioner Any detergent suitable for automatic front loading washing machines can be used. Please observe the instructions for use and dosage on the detergent packaging. Ensure that TwinDos dispensing is deactivated. Adding detergent Add fabric conditioner or liquid starch to the compartment. Do not exceed the maximum level mark. It will be automatically dispensed in the final rinse.
5. Add detergent Tips on dosing Adjust the detergent dosage to the level of soiling of the laundry and the size of the load. Reduce the amount of detergent with smaller loads (e.g. reduce the amount of detergent by ⅓ when washing a half load). Too little detergent: - Results in laundry not being cleaned properly and may cause it to become grey and hard to the touch over time. - Can lead to a build-up of mould in the washing machine.
5. Add detergent CapDosing Inserting a capsule Three different types of capsule are available: Open the detergent dispenser drawer. = Fabric care (e.g. fabric conditioner, proofing agent) = Additives (e.g. detergent enhancer) = Detergent (for the main wash only) Each capsule contains the correct amount for one wash cycle. Caps are available to order from Miele or from the Miele online shop (see the end of this booklet for contact details). Open the lid of the / compartment.
5. Add detergent The wash programme will dispense the contents of the capsule at the correct time. Water intake to the compartment is solely via the capsule. Do not add any additional fabric conditioner to the compartment. Remove the empty capsule at the end of the programme. Close the lid and press it firmly shut. Close the detergent dispenser drawer. The capsule is opened by the act of inserting it in the detergent dispenser drawer.
6. Starting the programme Starting a programme Adding laundry during a programme sequence (AddLoad) Laundry can be added or removed at any time, provided that the symbol is not illuminated on the control field. Touch the flashing Start/Add laundry sensor control. The door locks and the programme starts. If a Delay start time has been selected, this counts down on the time display.
7. End of programme Opening the door and removing the laundry The door remains locked during the anti-crease phase. The control field lights up for the first 10 minutes. The control field then goes out and the Start/Add laundry sensor control flashes. Items left in the drum could discolour other items in the next wash or become discoloured themselves. Remove all items from the drum. Turn the programme selector to the position. appears on the timer display and the indicator light goes out.
Spinning Final spin speed in wash programmes When a programme is selected, the sensor control for the optimum spin speed for that programme will be brightly lit up in the control field. A faster spin speed can be selected for certain wash programmes. The highest selectable spin speed is indicated in the table.
Delay start/SmartStart Delay start With the Delay start function, you can delay the start of the programme. This function is active when the SmartGrid programmable function is switched off. You can delay the start of a programme from 30 minutes up to a maximum of 24 hours. This allows you to make use of night-time economy electricity rates, for example. Selecting Delay start Select the programme required. Touch the sensor control.
Delay start/SmartStart SmartStart The SmartStart function lets you define a time period during which your washing machine will start automatically based on an external signal. The appliance will start on receipt of a signal, e.g. from your energy supplier, that indicates that the electricity tariff is particularly economical. This function is active when the SmartGrid programmable function is switched on. The time period can be defined between 30 minutes and 24 hours.
Programme chart ECO 40-60 Max. load 8.0 kg Items For normally soiled cotton garments Tip A laundry load consisting of mixed cottons that are intended for washing at 40 °C or 60 °C can be washed in the same wash cycle. This programme is the most efficient in terms of energy and water consumption for washing cottons. Note for test institutes: Test programme for compliance with EU legislation regarding ecodesign No. 2019/2023 and energy labelling in accordance with Regulation No. 2019/2014.
Programme chart Minimum iron Cold to 60 °C Max. load 3.5 kg Items Synthetic and mixed fibre textiles as well as easy care cotton Tip Reduce the spin speed for fabric that creases easily. Delicates Items Cold to 40 °C Max. load 2.0 kg Delicate garments made from synthetic fibre, mixed fibre and viscose Performance outerwear (e.g. jackets and trousers) made from membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®, etc. Curtains specified as machine-washable by the manufacturer.
Programme chart Dark garments/ Denim Cold to 60 °C Max. load 3.0 kg Items Black and dark items made of cotton, mixed fibre or denim Tip - Wash inside out. - Denim often contains excess dye and may run during the first few washes. Therefore, wash light and coloured items separately. Shirts Cold to 60 °C Max. load 1.0 kg/2.0 kg Items Shirts and blouses made of cotton and mixed fibre Tip - Pre-treat collars and cuffs depending on the level of soiling.
Extra options You can use the extra options buttons to augment the wash programmes. Selecting extra options Extra options are selected and deselected using the relevant sensor buttons on the control field. Pre-ironing In order to reduce creasing, the laundry undergoes a smoothing process at the end of the programme. Reducing the maximum load by 50 % will achieve a better result. Small loads achieve a better result.
Garment care label symbols Washing The figure quoted in the bucket is the maximum temperature at which the garment can be washed. Normal agitation Reduced agitation Much reduced agitation Hand wash Programme selection examples Cottons Minimum iron Delicates Woollens Express 20 Do not wash Programme Care symbols Drying Normal temperature Low temperature Do not tumble dry Ironing Approx. 200 °C Approx. 150 °C Approx.
Programme sequence Main wash Water level ECO 40-60 Cottons Minimum iron Delicates Woollens Express 20 Dark garments/Denim Shirts Wash rhythm Proofing – Drain/Spin – – Rinse Water level – Please see the next page for a description of the symbols.
Programme sequence = low water level = medium water level = high water level = intensive rhythm = normal rhythm = sensitive rhythm = handwash rhythm = carried out – Special features in the programme sequence Anti-crease: At the end of the programme, the drum continues to turn at intervals for up to 30 minutes to help prevent creasing. Exception: there is no anti-crease phase in the Woollens programme. The washing machine can be opened at any time.
Changing the programme sequence Changing a programme (safety lock) A programme, temperature, spin speed or selected options cannot be changed once the machine has been successfully started. This prevents the machine being operated unintentionally, e.g. by children. If the washing machine is switched off during active programme operation, the standby function does not switch the washing machine off completely after 15 minutes.
Detergent The correct detergent Dispensing aids All detergents produced for automatic washing machines are suitable. Follow the manufacturer's instructions and dosage recommendations on the packaging. Use dispensing aids, (e.g. balls) if these are supplied with the detergent, particularly when using liquid detergent. For users in Asia: please use a low foaming detergent suitable for use in front-loading machines When purchasing detergent buy refill packs wherever possible.
Detergent Recommended Miele detergents Miele detergents have been specially designed for day-to-day use in Miele washing machines. See “Detergents and care products” for more information about these detergents.
Detergent Recommended detergents in accordance with Directive (EU) Nr. 1015/2010 The recommendations apply to the temperature ranges given in the Programme chart.
Replacing the TwinDos cartridge 1. The Twin Dos whites sensor control will flash at the start of the programme to indicate that the cartridge for compartment 1 is empty. 2. The TwinDos colours sensor control will flash at the start of the programme to indicate that the cartridge for compartment 2 is empty. Preparing the cartridge Remove the cover cap from the cartridge. or Risk of damage from film seal If the film seal is not removed completely, leaks can occur in the TwinDos system.
Cleaning and care Cleaning the external casing and the control panel Risk of electric shock! Mains voltage is present when the washing machine is switched off Disconnect the machine from the electricity supply before cleaning or maintenance. Risk of damage due to ingress of water. The pressure of a water jet can cause water to get into the washing machine, resulting in damage to components. Do not spray the washing machine with a water jet.
Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. If clogged, the siphon in the / compartment will not work and the compartment can overflow. Clean the siphon particularly thoroughly after using liquid starch a few times. Clean the fabric conditioner channel using a brush and warm water. Cleaning the detergent dispenser drawer compartment 1. Remove the siphon from compartment and clean under warm running water.
Cleaning and care Hygiene info (Cleaning the drum) Washing at low temperatures and/or using liquid detergent can cause bacteria and unpleasant odours to build up in the washing machine. Use the Cottons 90 °C programme to clean the washing machine. Clean the drum no later than the point at which the indicator light and light up on the time display. Clean the filter. Reassemble in reverse order.
Cleaning and care TwinDos maintenance Damage resulting from dried laundry detergent. If the system has not been used for a long time (more than two months), detergent in the hoses can become viscous or dry out. The hoses can become blocked and would then need to be cleaned by a service technician. Clean the TwinDos system. To clean the system, you need a “TwinDosCare” cleaning cartridge, which is available from www.shop.miele.com. The washing machine has a cleaning programme for the TwinDos system.
Problem solving guide Many malfunctions and faults that can occur in daily operation can be easily remedied. Time and money will be saved because a service call will not be needed. The following guide may help you to find the reason for a malfunction or a fault, and to correct it. The programme does not start Problem Cause and remedy The control panel remains dark. There is no power to the machine. Check whether the mains plug is plugged in and switched on.
Problem solving guide The programme is cancelled and a fault indicator light lights up in the control panel Problem Cause and remedy The fault indicator light lights up, and appear alternately in the time display and the buzzer sounds. The water outlet is blocked or restricted. The drain hose has been fixed too high. Clean the drain filter and the drain pump. The maximum delivery head is 1 m.
Problem solving guide During the programme sequence, a symbol appears in the time display Message lights up Cause and remedy The programme selector was moved to a different position after the programme had started. Turn the programme selector back to the original position. lights up briefly in The washing machine is indicating that it is netthe time display when a worked. programme is selected. lights up in the time The remote control function is switched off.
Problem solving guide At the end of the programme, an indicator light lights up in the control panel Problem Cause and remedy The indicator light lights up. Excessive foam has built up during washing. Use less detergent next time and follow the manufacturer’s instructions on dosage given on the packaging. The indicator light lights up and appears on the time display. When washing, a wash programme using a temperature above 60 °C has not been run for a long time.
Problem solving guide Messages or faults with the TwinDos system Problem Cause and remedy The Twin Dos whites sensor control flashes. The UltraPhase 1 cartridge is empty. Replace the UltraPhase 1 cartridge while the washing machine is switched on. The TwinDos colours sensor control flashes. The UltraPhase 2 cartridge is empty. Replace the UltraPhase 2 cartridge while the washing machine is switched on. The indicator light lights up and appears on the time display.
Problem solving guide General problems with the washing machine Problem The washing machine smells. Cause and remedy The indicator light lighting up and appearing on the time display was ignored. When washing, a wash programme using a temperature above 60 °C has not been run for a long time. In order to prevent bacteria and unpleasant odours building up in the washing machine, run the Cottons 90 °C programme using Miele machine cleaner or a multi-purpose powder detergent.
Problem solving guide General problems with the washing machine Problem Cause and remedy Large amounts of deter- The water pressure is too low. gent residue remain in Clean the water inlet filter. the detergent dispens- Please note that the water pressure must be at ing drawer. least 100 kPa (1 bar). Powder detergent used in conjunction with water softeners tends to become sticky.
Problem solving guide An unsatisfactory wash result Problem Cause and remedy Liquid detergent does not give the required result. Liquid detergents usually contain no bleaching agents. They do not remove fruit, coffee and tea stains. Use the Miele 2 Phase System. The targeted addition of UltraPhase 2 during the wash process removes stains effectively. Use a general purpose powder detergent containing a bleaching agent.
Problem solving guide The door will not open Problem Cause and remedy The door cannot be pulled open during a programme. The drum is locked during a programme. Follow the description in “5. Starting a programme – Adding or removing laundry”. After the programme is For safety reasons the drum door cannot be opened cancelled, flashing bars if the suds temperature is higher than 55 °C. ......... appear Wait until the temperature in the drum has dein the time display.
Problem solving guide Opening the door in the event of a blocked drain outlet and/ or power cut Switch off the washing machine. Open the access panel for the drain pump. Blocked drain outlet If the drain outlet is blocked, there may be a large quantity of water left behind in the washing machine. Risk of scalding due to hot suds. Escaping suds will be hot if laundry has been washed at high temperatures! Carefully allow all suds to drain off.
Problem solving guide Open the door Danger of injury due to rotating drum! Reaching into a moving drum is extremely dangerous. Always make sure that the drum is stationary before reaching in to remove laundry. Clean the drain filter thoroughly. Remove any foreign objects (e.g., buttons, coins etc.) and clean the interior. Turn the impellers by hand to check that they rotate freely. Replace the drain filter correctly and tighten it securely. Close the drain pump access panel.
Service Contact in the event of a fault Optional accessories In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department. Optional spare parts and accessories for this washing machine are available from your Miele Dealer, the Miele Spare Parts Department or via the internet at www.miele.co.uk. You can book a Miele Customer Service Department call-out online at www.miele.com/service.
*INSTALLATION* Installation Front view a Water inlet hose (pressure tested to 7000 kPa) e Detergent dispenser drawer b Mains connection cable g Access to drain filters, drain pumps and emergency release c Flexible drain hose (with detachable swivel elbow) d Control panel f Door h Access panel for TwinDos cartridges i Four height-adjustable feet 65
*INSTALLATION* Installation Rear view a Drain hose b Transport clips for inlet and drain hoses and mains connection cable c Mains connection cable d Protruding lid for holding when moving the machine 66 e Water inlet hose (pressure tested to 7000 kPa) f Safety caps for transit bars g Transport clips for inlet and drain hoses and for storing transit bars when not in use
*INSTALLATION* Installation Installation surface A concrete floor is the most suitable installation surface. It is far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. Please note: The machine must be level and securely positioned. To avoid vibrations during spinning, the machine should not be installed on soft floor coverings. If installing on a wooden joist floor: Install the machine on a plywood base (at least 59 x 52 x 3 cm).
*INSTALLATION* Installation Removing the transit bars Removing the right-hand transit bar Removing the left-hand transit bar Push the cover out and turn the lefthand transit bar 90° using the spanner supplied. Push the cover out and turn the lefthand transit bar 90° using the spanner supplied. Withdraw the transit bar. Withdraw the transit bar.
*INSTALLATION* Installation Covering holes Securing the transit bars Risk of injury from sharp edges. There is a risk of injury from reaching into holes that are not covered. Cover the holes for the transit bars after they have been removed. Secure the transit bars to the back of the washing machine. Make sure that the top catch is located above the holder. Push the covers in firmly until they engage in position. Risk of damage from incorrect transport.
*INSTALLATION* Installation Fitting the transit bars Opening the covers Press against the retainer with a sharp object (a narrow screwdriver, for example). The cover opens. Fitting the transit bars To fit the bars, follow the instructions for removing them in reverse order. Tip: The bars will slide in more easily if you lift the drum slightly.
*INSTALLATION* Installation Levelling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used for levelling the washing machine. The machine is supplied with all four feet are screwed in. Use a level to check that the washing machine is standing level.
*INSTALLATION* Installation Installing under a continuous worktop Risk of electric shock due to ex- posed cables There is a risk of coming into contact with live parts while the lid is removed. Do not remove the washing machine lid. Washer-dryer stack The washing machine can be combined with a Miele tumble dryer in a washerdryer stack. The appropriate “WTV” stacking kit* to match your dryer is required. All parts marked* are available from your Dealer or Miele.
*INSTALLATION* Installation The water protection system Drain hose The Miele water protection system protects all parts of the washing machine from water damage. The drain hose is protected by a ventilation system which prevents the washing machine from being emptied completely.
*INSTALLATION* Installation Connection to the water supply Maintenance Connecting the water inlet Health risk and risk of damage due to contaminated incoming water. The quality of the incoming water must correspond to the drinking water specification of the country in which the washing machine is being operated. Always connect the washing machine to the mains water supply. The water connection pressure needs to be between 100 and 1000 kPa.
*INSTALLATION* Installation Water drainage Fitting the elbow The suds are drained through a drain pump with a 1 m high delivery head. For the water to drain freely, the hose must be free of kinks. If required, the hose can be extended to a length of up to 5 m. Accessories are available from your Miele dealer or from the Miele Customer Service Department. Use the elbow supplied to stop the drain hose from slipping. For drain heights of more than 1 m (up to a maximum delivery head of 1.
*INSTALLATION* Installation Direct connection to a sink drain outlet a Adapter b Spigot nut c Hose clip d End of the hose Fit adapter to the sink drain outlet using nut . Attach the end of hose to adapter . Use a screwdriver to tighten hose clip up close to the nut.
*INSTALLATION* Installation Electrical connection The washing machine is supplied with an electrical connection cable with moulded plug ready for connection to a switched socket. The socket must be easily accessible after the washing machine has been installed. If that is not possible, ensure that a suitable means of disconnection is provided on the installation side for each pole. Risk of fire from overheating.
Technical data Height 850 mm Width 596 mm Depth 643 mm Depth with door open 1077 mm Height for building under 850 mm Width for building under 600 mm Weight Approx. 85 kg Capacity 8.0 kg dry laundry Supply voltage See data plate Rated load See data plate Fuse rating See data plate Consumption data See “Consumption data” Minimum water flow pressure 100 kPa (1 bar) Maximum water flow pressure 1000 kPa (10 bar) Water inlet hose length 1.60 m Drain hose length 1.
Technical data EU Conformity declaration Miele hereby declares that this washing machine complies with Directive 2014/53/ EU. The complete text of the EU declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.ie - For service, information, operating instructions etc: go to www.miele.ie/domestic/customer-information-385.
Energy Water Running time Temperature Residual moisture kg kWh Litres h:min °C % rpm 8.0 0.77 60 3:39 42 51 1400 4.0 0.40 52 2:39 31 51 1400 2.0 0.20 28 2:39 25 54 1400 60 8.0 1.35 49 2:29 52 53 1400 20 8.0 0.35 69 2:39 20 53 1400 30 3.5 0.45 52 1:59 30 30 1200 40 3.5 0.34 30 0:20 26 60 1200 30 2.0 0.
Programmable functions The programmable functions are used to alter the washing machine’s electronics to suit changing requirements. Programmable functions can be altered at any time. Opening the programming level Programming is carried out in 8 steps (, , ... ) using the sensor controls. Prerequisites: - The washing machine is switched on (the programme selector is pointing to a wash programme). - The washing machine door is open.
Programmable functions Editing and saving a programmable function You can either switch a programmable function on/off or select different options.
Programmable functions Lock code The lock code prevents the washing machine being used without your knowledge. When the code has been activated, you have to enter a code after switching the washing machine on. Otherwise the washing machine cannot be operated. Options = Lock code switched off (factory default setting) = Lock code is switched on Using the washing machine with a lock code The code is 125 and cannot be altered. Switch on the washing machine.
Programmable functions Memory The washing machine will save the last settings (temperature, spin speed and some of the extras) selected for a programme after the programme has started. When this programme is chosen again, these saved settings will appear in the display. Options = Memory is switched off (factory default setting) = Memory is switched on Longer pre-wash Cottons If you require a longer pre-wash you can extend the pre-wash time.
Programmable functions Maximum rinse level The water level in the rinse cycle can be permanently set to the highest value. This function is useful for allergy sufferers as it achieves an excellent rinse result. Water consumption will increase. Options = Maximum rinse level is switched off (factory default setting) = Maximum rinse level is switched on Suds cooling When this is activated, additional water flows into the drum at the end of the main wash to cool the suds down.
Programmable functions Backlight brightness dimmed The brightness of the dimmed sensors in the control panel can be set to one of seven different levels. UltraPhase 1 dispensing quantity The dispensing quantity is preset to 58 ml at the factory (water hardness level II). The brightness changes as soon as you select a different setting. You can adjust the dispensing quantity using this programmable function. Options The set millilitres appear on the time display.
Programmable functions TwinDos maintenance The washing machine has a cleaning programme for the TwinDos system. Running the cleaning programme will clean the hoses inside the washing machine. When the indicator light lights up and appears on the time display, the washing machine must be cleaned. Refer to the “Cleaning and care” chapter, “TwinDos maintenance” section for information on how to perform cleaning.
Programmable functions Networking The , and programmable functions are only displayed if the requirements for using Miele@home have been met (see the “Before using for the first time” chapter, “Miele@home” section). Remote control You can use the Miele app to check the status of your washing machine from anywhere and start it remotely. You can also control it remotely via the MobileStart programme.
Programmable functions RemoteUpdate The RemoteUpdate function is used to update the software in your washing machine. If an update is available for your washing machine, it will automatically download it. Updates will not be installed automatically. They must be initiated manually. If you do not install an update, you can continue to use your washing machine in the usual way. However, Miele recommends installing updates.
Programmable functions Postponing the update After the washing machine is switched on, appears on the time display. Touch the sensor control. The running time of the selected programme appears on the time display. The next time you switch on the washing machine, you will be prompted to start the update again. Switching off WiFi Turn the programme selector to the MobileStart programme. appears on the time display.
Detergents and care products Detergent, fabric care products, additives and machine care products are available for this washing machine. All products have been designed for Miele washing machines. UltraWhite (powder detergent) These and many other products can be ordered from www.shop.miele.com, the Miele Customer Service Department or your Miele dealer.
Detergents and care products Specialist detergents Caps UltraDark These specialist detergents are available as convenient single-use capsules.
Detergents and care products Fabric care Machine care These fabric care products are available as convenient single-use capsules.
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk/service, E-mail: info@miele.co.uk Australia Miele Australia Pty. Ltd. ACN 005 635 398 ABN 96 005 635 398 Level 4, 141 Camberwell Road Hawthorn East, VIC 3123 Tel: 1300 464 353 Internet: www.miele.com.au China Mainland Miele Electrical Appliances Co., Ltd. 1-3 Floor, No.
WWD 660 en-GB, IE M.-Nr.