User's Manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the washing machine
- Before using for the first time
- Washing environmentally and economically
- 1. Prepare the laundry
- 2. Select a programme
- 3. Load the washing machine
- 4. Select programme settings
- 5. Add detergent
- 6. Starting the programme
- 7. End of programme
- Spinning
- Programme chart
- Garment care label symbols
- Extra options
- Programme sequence
- Changing the programme sequence
- Detergent
- The correct detergent
- The right amount to dispense will depend on the following:
- Water softeners
- Dispensing aids
- Refill packs of detergent
- Fabric conditioner and liquid starch
- Using fabric conditioner or starch separately
- Colour run and dye removers/dyes
- Recommended Miele detergents
- Recommended detergents in accordance with Directive (EU) Nr. 1015/2010
- Cleaning and care
- Problem solving guide
- The programme does not start
- Fault message after a programme has been interrupted.
- Fault message at the end of a programme
- Fault message at the end of a programme
- General problems with the washing machine
- General problems with the washing machine
- An unsatisfactory wash result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Installation
- Technical data
- Consumption data
- Settings
- Accessing the Settings menu
- Selecting settings
- Changing a setting
- Closing the settings menu
- _
- Buzzer volume
- Keypad tone
- Welcome tone
- Code
- Units
- Brightness
- Disp. switch-off stat.
- Programme info
- Memory
- Long p-wash Cotton
- Soak duration
- Gentle action
- Temp. reduction
- Water plus
- Water plus level
- Maximum rinse level
- Suds cooling
- Low water pressure
- Anti-crease
- Miele@home
- _
- SmartGrid
- RemoteUpdate
- Detergents and care products
Operating the washing machine
14
Control panel
a
Control field
The control field consists of a dis-
play and various sensor controls.
The individual sensors are explained
in the following sections.
b
Display
The following values are shown on
the display and/or selected from it:
1. The temperature, spin speed, and
time left for the selected wash
programme.
2. The individual values for selected
extras and settings.
c
sensors
Values shown in the display can be
changed with the sensors. The
sensor increases the value or
moves up the list; the sensor de-
creases the value or moves down
the list.
d
OKsensor control
The OKsensor control is used for
confirming selected values.
e
PowerWashdisplay with the
and sensor controls
If the PowerWash indicator lights up
when you select a programme, you
can choose between three pro-
gramme sequences. Further inform-
ation can be found in “4. Programme
settings – PowerWash display with
the and sensor controls”.
– PowerWashdisplay: Normal pro-
gramme sequence
– PowerWashdisplay with
sensor control (Quick): Short
programme sequence
– PowerWashdisplay with
sensor control (Eco): Energy-
saving programme sequence