User's Manual
Table Of Contents
- Contents
- Caring for the environment
- Warning and Safety instructions
- Operating the washing machine
- Before using for the first time
- Washing environmentally and economically
- 1. Prepare the laundry
- 2. Select a programme
- 3. Load the washing machine
- 4. Select programme settings
- 5. Add detergent
- 6. Starting the programme
- 7. End of programme
- Spinning
- Programme chart
- Garment care label symbols
- Extra options
- Programme sequence
- Changing the programme sequence
- Detergent
- The correct detergent
- The right amount to dispense will depend on the following:
- Water softeners
- Dispensing aids
- Refill packs of detergent
- Fabric conditioner and liquid starch
- Using fabric conditioner or starch separately
- Colour run and dye removers/dyes
- Recommended Miele detergents
- Recommended detergents in accordance with Directive (EU) Nr. 1015/2010
- Cleaning and care
- Problem solving guide
- The programme does not start
- Fault message after a programme has been interrupted.
- Fault message at the end of a programme
- Fault message at the end of a programme
- General problems with the washing machine
- General problems with the washing machine
- An unsatisfactory wash result
- The door will not open
- Opening the door in the event of a blocked drain outlet and/or power cut
- Service
- Installation
- Technical data
- Consumption data
- Settings
- Accessing the Settings menu
- Selecting settings
- Changing a setting
- Closing the settings menu
- _
- Buzzer volume
- Keypad tone
- Welcome tone
- Code
- Units
- Brightness
- Disp. switch-off stat.
- Programme info
- Memory
- Long p-wash Cotton
- Soak duration
- Gentle action
- Temp. reduction
- Water plus
- Water plus level
- Maximum rinse level
- Suds cooling
- Low water pressure
- Anti-crease
- Miele@home
- _
- SmartGrid
- RemoteUpdate
- Detergents and care products
6.Starting the programme
34
Touch the flashingStart/Add laundry
sensor control.
The door will lock and the programme
will start.
The programme status will appear in
the display.
The washing machine will keep you up-
dated on the programme status and the
time remaining for the programme to
run.
If a delay start period has been selec-
ted, this will appear in the display.
Energy savings
After 10minutes, the indicators dim.
The sensor controlStart/Add laundry
flashes.
To reactivate the indicators:
Touch theStart/Add laundrysensor
control (this does not have any effect
on a programme that is running).
Adding laundry during a pro-
gramme sequence
Laundry can be added or removed at
any time, provided that the symbol
is not illuminated in the display.
Touch theStart/Add laundry sensor
control.
The following appears in the display:
Please wait
Wait until the following display lights
up:
Door can be opened
Open the door and add or remove
laundry.
Close the door.
Touch theStart/Add laundry sensor
control.
The programme will continue.
Laundry cannot usually be added or re-
moved if:
– The suds temperature is above 55°C
– The water inside the drum is above a
certain level