Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the washer
- Before using for the first time
- Environmentally friendly washing
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Loading the washing machine
- 4. Selecting program settings
- 5. Add detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Delay start/SmartStart
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- The program is canceled and a fault indicator light lights up on the control field
- During the program sequence, a symbol appears on the time display
- At the end of the program, an indicator light lights up on the control field
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Programmable functions
- Choosing and selecting programmable functions
- Editing and saving the programmable function
- Exiting the programming level
- Buzzer
- Keypad tone
- PIN code
- switch-off status
- Memory
- Water intake
- Gentle action
- Reducing the temperature
- Maximum rinse level
- Suds cooling
- Anti-crease
- Low water pressure
- Chlorine bleach
- Display brightness dimmed
- Welcome tone
- Networking
- Remote control
- SmartGrid
- RemoteUpdate
- Switching off WiFi
- Detergents and care products
6. Starting a program
27
Starting a program
Touch the flashingStart/Add laundry
sensor button.
The door will lock and the wash
program will start.
If a delay-start period has been
selected, this counts down on the time
display. At the end of the delay-start
period or immediately after the program
has started, the program duration will
appear on the time display.
Energy savings
After 10minutes, the indicators dim.
The Start/Add laundrysensor button
flashes.
You can reactivate the indicators:
Touch the Start/Add laundrysensor
button (this does not have any effect
on a program that is running).
Adding laundry during a
program sequence (AddLoad)
Laundry can be added or removed at
any time, provided that the symbol
is not illuminated on the control field.
Touch the Start/Add laundrysensor
button.
Rotating bars ...... are
shown in the time display.
If the word appears on the time
display, the door can be opened.
Open the door and add or remove
laundry.
Close the door.
Touch the Start/Add laundrysensor
button.
The wash program will continue.
Laundry cannot usually be added or
removed if:
- The suds temperature is above 130°F
(55°C).
- The water inside the drum is above a
certain level.