Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the washer
- Before using for the first time
- Environmentally friendly washing
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Loading the washing machine
- 4. Selecting program settings
- 5. Add detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Delay start/SmartStart
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- The program is canceled and a fault indicator light lights up on the control field
- During the program sequence, a symbol appears on the time display
- At the end of the program, an indicator light lights up on the control field
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Programmable functions
- Choosing and selecting programmable functions
- Editing and saving the programmable function
- Exiting the programming level
- Buzzer
- Keypad tone
- PIN code
- switch-off status
- Memory
- Water intake
- Gentle action
- Reducing the temperature
- Maximum rinse level
- Suds cooling
- Anti-crease
- Low water pressure
- Chlorine bleach
- Display brightness dimmed
- Welcome tone
- Networking
- Remote control
- SmartGrid
- RemoteUpdate
- Switching off WiFi
- Detergents and care products
Programmable functions
75
Editing and saving the
programmable function
You can either switch a programmable
function on/off or select different
options.
Touch the or sensor button to
switch the programmable function
on/off or to select an option:
Programmable function
Available options
–
= Can be selected
= Factory default
Confirm the chosen selection with
the Start/Add laundry sensor button.
The number of the programmable
function, e.g., , will then light up
again.
Exiting the programming level
Turn the program selector to .
The setting you have selected are now
stored in the memory. You can alter the
settings again at any time.
Buzzer
The buzzer sounds to let you know the
program has finished.
Options
= Normal buzzer volume
= Loud buzzer volume
(factory setting)
Keypad tone
Each touch of a sensor button is
confirmed with an audible tone.
Options
= Keypad tone is switched off
= Keypad tone is set to normal
volume
= Keypad tone is set to loud
volume (factory default)