Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the washer
- Before using for the first time
- Environmentally friendly washing
- 1. Prepare the laundry
- 2. Selecting a program
- 3. Loading the washing machine
- 4. Selecting program settings
- 5. Add detergent
- 6. Starting a program
- 7. Program end
- Spin cycle
- Delay start/SmartStart
- Program guide
- Extra options
- Wash program overview – extra options
- Program sequence
- Changing the program sequence
- Detergent
- Cleaning and care
- Frequently Asked Questions
- A wash program cannot be started
- The program is canceled and a fault indicator light lights up on the control field
- During the program sequence, a symbol appears on the time display
- At the end of the program, an indicator light lights up on the control field
- General problems with the washer
- General problems with the washing machine
- Poor wash results
- The drum door cannot be opened
- Opening the door in the event of a blocked drain outlet and/or power outage
- Customer Service
- Installation
- Front view
- Rear view
- Installation surface
- Transporting the washing machine to its installation site
- Removing the shipping struts
- Installing the shipping struts
- Leveling the machine
- Additional installation requirements
- Product Dimensions
- The water protection system
- Water intake
- Water drainage
- Electrical connection
- Technical data
- Programmable functions
- Choosing and selecting programmable functions
- Editing and saving the programmable function
- Exiting the programming level
- Buzzer
- Keypad tone
- PIN code
- switch-off status
- Memory
- Water intake
- Gentle action
- Reducing the temperature
- Maximum rinse level
- Suds cooling
- Anti-crease
- Low water pressure
- Chlorine bleach
- Display brightness dimmed
- Welcome tone
- Networking
- Remote control
- SmartGrid
- RemoteUpdate
- Switching off WiFi
- Detergents and care products
Programmable functions
77
Memory
The washing machine will save the
last settings (temperature, spin speed,
and some of the extra options)
selected for a wash program after the
program has started.
When the program is chosen again, the
saved settings will appear on the
display.
Options
= Memory is switched off
(factory setting)
= Memory is switched on
Water intake
You can program 2 options for the
water intake. The water intake is
controlled by the two intake hoses.
Options
= Cold water
The washing machine will be
operated with cold water only.
= Hot water (factory setting)
Hot water is used in the main
wash.
Risk of damage from incorrect
water connection.
Connection to a hot water supply
only is not permitted. When being
operated with hot water, the washing
machine always requires a cold
water connection as well in order to
control the temperature of the water
used for washing the laundry.
The washing machine must always
be connected to cold water.
Gentle action
When Gentle action is activated, drum
rotation is reduced. In this way, lightly
soiled items can be washed more
gently.
Gentle action can be activated for the
Normal and Wrinkle-free programs.
Options
= Gentle action is switched off
(factory setting)
= Gentle action is switched on