Short user manual

 fold here  fold here  fold here  fold here  fold here  fold here
OPERATION PREPARING THE LAUNDRY/SELECTING A PROGRAM ADDING LAUNDRY
 Damage from incorrect installation
and connection.
Installing and connecting the washing ma-
chine incorrectly will cause serious dam-
age to property.
See “Installation”.
 Damage resulting from failure to re-
move the shipping struts.
Failure to remove the shipping struts can
result in damage to the washing machine
and to adjacent cabinetry or appliances.
Remove the shipping struts as described
in “Installation and connection”.
3steps must be completed before the
washing machine can be operated.
1. Remove the shipping struts.
2. Set up Miele@home.
3. Start the calibration program.
For additional information, please refer to
the separate operating instructions sup-
plied.

 


 

Operating the sensor buttons
The sensor buttons react to fingertip con-
tact. If a sensor button is illuminated, it can
be selected.
If a sensor button is brightly lit, this means:
currently selected
If a sensor button is dimly lit, this means:
selection possible
a
Control field
b
Temperature sensor buttons
for selecting the temperature.
c
Spin Speed sensor buttons
for selecting the final spin speed.
d
Sensor buttons for options
You can supplement the wash pro-
grams with options. If a wash program
has been selected, the sensor buttons
for the available options light up dimly.
e
Indicator lights
 Faults affecting the water inlet
and drainage
 Excess detergent used
 Reminder about Sanitize informa-
tion
 The Add laundry function cannot
be selected.
f
CapDosing sensor buttons
 Fabric care (e.g., fabric softener,
proofing agent)
 Additives (e.g., detergent en-
hancers)
 Detergent (for the main wash
only)
g
Time display
After the program has started, the pro-
gram runtime will appear on the display
in hours and minutes.
h
Sensor buttons  
For the Delay start function.
i
Start/Add laundrysensor button
 Touching the Start/Add laun-
drysensor button starts the se-
lected program. The sensor but-
ton lights up constantly.
 Once the program has been
started, the Start/Add laun-
drysensor button allows you to
add laundry.
j
Optical interface
This is used by the Service department
as a transmission point.
k
Program selector
For selecting programs and for switch-
ing the machine off. The washing ma-
chine is switched on when you select a
program, and switched off by turning
the program selector to the position.
Environmentally friendly washing
- Make use of the maximum load that the
wash program can accommodate. This
will keep energy and water consumption
to a minimum in relation to the size of the
load.
- Use the Express program for small, lightly
soiled loads.
- Modern detergents make it possible to
wash at lower temperatures (e.g.,
70°F/20°C). Using the corresponding
temperature settings will save energy.
- Washing at low temperatures and/or us-
ing liquid detergents can cause bacteria
and odors to build up in the washing ma-
chine. Miele therefore recommends
cleaning the washing machine once ev-
ery month.
When the indicator light lights up on
the control field and  appears on the
time display, the washing machine must
be cleaned.
1. Preparing the laundry
 Empty all pockets.
 Damage due to foreign ob-
jects.
Nails, coins, paper clips, and so
on can cause damage to gar-
ments and components in the
machine.
Check the laundry before wash-
ing and remove any such foreign
objects.
 Sort the laundry by color and by care label. Most gar-
ments have a textile care label in the collar or side
seam.
 Pre-treat stains and badly soiled areas.
2. Selecting a program
1. Selecting the standard programs with the program
selector dial
 Turn the program selector to the
required program. The selected
program will be shown in the
display. This will then be re-
placed by the standard display.
2. Selecting programs via the
MobileStartprogram selector position and the
Miele app
To use MobileStart, the washing machine must be
logged on to the WiFi network and Remote control must
be switched on.
 Turn the program selector to the
MobileStartposition.
 appears on the time display.
The washing machine can now be operated with the Miele
app.
3
1
2
4
1
Detergent dispenser drawer
2
Control panel
3
Drain filter
4
Door
3. Loading the washing machine
Opening the door
 Take hold of the door and pull it
open.
 Unfold the laundry and load
loosely into the drum.
Closing the door
 Make sure that no items are
caught between the door and
the seal.
 Shut the door gently.
4. Selecting program settings
Selecting a temperature and spin speed
The wash program’s pre-set temperature and spin speed
light up brightly. The choice of temperatures and spin
speeds selectable for the wash program light up dimly.
 Touch the sensor button for the temperature desired. It
will then light up brightly.
 Touch the sensor button for the spin speed desired. It
will then light up brightly.
Selecting options
The selection of options available for the wash program
lights up dimly.
 Touch the sensor button for the required option. It will
then light up brightly.
Tip: You can select multiple options for a single wash pro-
gram.
5. Add detergent
There are several options for adding deter-
gent to the washing machine.
CapDosing
If you selected CapDosing when setting the
program, detergent will be dispensed via
the capsule for this wash program.
Using powder detergent
The detergent drawer contains an insert for
liquid detergent in the compartment.
This insert must be removed to use powder
detergent. It is not possible to use powder
detergent in the compartment.
Filling with detergent
This washing machine requires particularly
efficient detergent. Add detergent in accor-
dance with the value in the pull-down
dosage display.
 Pull out the deter-
gent drawer and
add detergent to
the compart-
ments.


Chlorine bleach for removing
stains or liquid detergent for the
pre-wash
 Detergent for the main wash,
including Soak if selected


Fabric softener, liquid starch, or
caps
Using chlorine bleach
 Damage due to chlorine bleach.
Textiles may be discolored or their fibers
damaged.
Only use chlorine bleach on suitable tex-
tiles.
Chlorination must be activated in the set-
tings before chlorine bleach is first used.
The Pre-washoption must not be se-
lected.
 Pour max. 1/4 cup (60ml) of bleach
into the chamber.
The chlorine bleach is added automatically
10minutes before the end of the main
wash.
6. Start the program
 Touch the flashingStart/Add laundry
sensor button.
The door will lock and the wash program
will start.
Adding laundry during a program
sequence
Laundry can be added or removed at any
time, provided that the symbol is not illu-
minated on the control field.
 Touch the Start/Add laundrysensor but-
ton.
Rotating bars... ...  appear on
the time display.
If the word  appears on the time dis-
play, the door can be opened.
 Open the door and add or remove laun-
dry.
 Close the door.
 Touch the Start/Add laundrysensor but-
ton.
The wash program will continue.
Changing a program (safety lock)
A program, temperature, spin speed, or se-
lected options cannot be changed once the
machine has been successfully started.
This prevents the machine being operated
unintentionally, e.g., by children.
Canceling a program
You can cancel a wash program at any time
after it has started.
 Turn the program selector to the posi-
tion.
 Turn the program selector to any posi-
tion.
Rotating bars  ...  ...  or  ap-
pear on the time display. The water is
pumped away and the door lock is then re-
leased.
7. Program end
The door is locked in the Anti-crease
phase.
 Turn the program selector to the posi-
tion.
appears on the time display and the
indicator light goes out. The door will be
unlocked.
Tip: After the Anti-crease phase, the door
will unlock automatically.
 Take hold of the
door and pull it
open.
 Remove the laun-
dry.
Items left in the drum could discolor other
items in the next wash or become discol-
ored themselves.
Remove all items from the drum.
 Check the folds in
the door seal for
any foreign ob-
jects.
Tip: Leave the door slightly open.
 If you used a capsule, remove it from the
detergent drawer.
Tip: Leave the detergent drawer slightly
open.
Delay Start/SmartStart
You can delay the start of a program from
30minutes up to a maximum of 24hours.
This allows you to make use of night-time
economy electricity rates, for example.
Selecting Delay Start
 Select the wash program required.
 Touch the
sensor but-
ton.
 Touch the  or sensor button re-
peatedly until the required Delay Start
time appears on the time display.
- In the case of settings below 10hours,
the Delay Start time changes in incre-
ments of 30minutes.
- In the case of settings above 10hours,
the delay-start period changes in incre-
ments of 1hour.
 Touch the flashingStart/Add laundry
sensor button.
The Delay Start process starts and counts
down on the time display.
SmartStart – Setting the time period
If the SmartGrid programmable func-
tion is activated, the function of the sensor
button changes. The time display no
longer shows the Delay Start period; in-
stead, it shows the time period in which
your washing machine can be started au-
tomatically. The procedure for setting this
is the same as for setting the time for De-
lay Start. For additional information, please
refer to the separate operating instructions
supplied.
Options
Options are selected and deselected us-
ing the relevant sensor buttons in the con-
trol field.
Heavy soiled
For laundry that is very heavily soiled. The
extended wash duration enhances the
stain-removing effect.
Lightly soiled
For slightly soiled fabrics that are not
stained. The wash duration is reduced.
SoftSteam
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the program. Reducing the maxi-
mum load by 50% will give a better result.
Please note the load information in the
display. Small loads achieve a better re-
sult.
without
SoftSteam
with
SoftSteam
Full load  Half load
Half load  Small load
Small load  Very small load
The garments must be suitable for drying
in a tumble dryer   and suitable for
ironing  .
Buzzer
A buzzer sounds at the end of the pro-
gram. The buzzer sounds until the wash-
ing machine is switched off.
Before the first use Operation Preparing the laundry Selecting a program Starting a program Delay Start/Options
 fold here  fold here  fold here  fold here  fold here  fold here
en-US
M.-Nr. 11 622 790
WWD 160, WXD 160