Datasheet

SKU<SPACE>{Type}<SPACE>[Loc]<CR>
Parameter Description
Type The type of the key:
TEMP chooses the temporary key
STAT chooses the static key
Loc Use this parameter only with STAT-Parameter! Specifies the zero
based location of the static key. See SSK command.
Table 3: Set Key to Use parameter description
Response, if successful:
OK!<CR>
Examples:
Use the temporary key
SKU<SPACE>TEMP<CR>
Use the static key in location 2
SKU<SPACE>STAT<SPACE>2<CR>
Possible error codes:
UPA<CR> Unknown parameter
EDX<CR> Location fail, or other characters than 0-9 given
NOR<CR> Location given is higher than 23
KNS<CR> Key Not Set (if temporary key is selected, but not set before)
metraTec MiFare Protocol Guide Page 14 of 38