SDS

Environment Hazard See Section 12 for additional Ecological Information
3. COMPOSITION/INFORMATION ON INGREDIENTS
.
Chemical Name
CAS-No
Weight %
Lead
7439-92-1
65～75
Sulfuric acid
7664-93-9
10～20
ABS resin
9003-56-9
～5
Tin
7440-31-5
＜0.5
Calcium
7440-70-2
＜0.1
4. FIRST AID MEASURES
General Advice
Eye Contact
Skin Contact
Inhalation
Ingestion
Notes to Physician
Protection of First-aiders
First aid is upon rupture of sealed battery.
Immediate medical attention is required. Rinse immediately with plenty of water, also
under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not
rub affected area.
Immediate medical attention is required. Wash off immediately with soap and plenty
of water removing all contaminated clothes and shoes.
Move to fresh air. Call a physician or Poison Control Center immediately. If not
breathing, give artificial respiration. If breathing is difficult, give oxygen.
Immediate medical attention is required. Call a physician or Poison Control Center
immediately. Do NOT induce vomiting. Drink plenty of water. Never give anything by
mouth to an unconscious person. Remove from exposure, lie down.
Treat symptomatically.
Use personal protective equipment. Avoid contact with skin, eyes and clothing.
5. FIRE-FIGHTING MEASURES
Flammable Properties
Flash Point
Suitable Extinguishing Media
Uniform Fire Code
Hazardous Combustion Products
Explosion Data Sensitivity to Mechanical
Impact Sensitivity to Static Discharge
Specific Hazards Arising from the Chemical
Protective Equipment and Precautions for Firefighters
Not flammable.
Not determined.
Use extinguishing measures that are appropriate to local
circumstances and the surrounding environment.
Corrosive: Acid-Liquid
Hazardous metal fumes and oxides.
No.
No.
The product causes burns of eyes, skin and mucous
membranes. Thermal decomposition can lead to release of
irritating gases and vapors. In the event of fire and/or explosion
do not breathe fumes.