Installation manual

26 Rodeo Gear Medium Duty Dual Gate Opener Installation Manual rev 05.7.13
ACCESS CONTROLS
Accessories
Solar Panel (FM123) 10 watt
If your gate is more than 1000' from an AC power source, you can choose to maintain the
battery charge with the Solar Panel Charging Kit. Installation in some regions of the world will
require multiple solar panels for adequate charging power.
Pin Lock (FM133)
The Pin Lock substitutes for the clevis pin at the front end of the Rodeo Gear gate openers.
Helps prevent theft of the opener from the gate.
Single Button Transmitter (FM135)
The Rodeo Gear entry transmitter, with adjustable settings, is standard equipment with all Rodeo
Gear systems. Purchase one for every vehicle in your family.
Digital Keypad (FM137)
Allow friends and delivery personnel to pen the gate using a personal identification code that
you provide. Easily program up to 25 different personal identification number (PIN) codes. The
digital keypad can be wireless or wired to your opener.
Keypad Mounting Post (FM100)
This black powder coated pedestal is designed to provide convenient access to your keypad,
wireless intercom, or other access control device from your vehicle. Surface Mount Flanges
(F102) and Extensions (F103) for added height are available.
Gate Opening Sensor (FM138)
The Sensor is an electromagnetic sensor, which offers "hands free" operation of the Rodeo
GearGate Openor with a 12 ft. radius of detection of vehicles in motion. A wireless version of the
Gate Opening Sensor is available. (FM130)
Automatic Gate Lock (FM143)
A MUST for added security. Solenoid driven, with a steel housing. Unlocks and locks
automatically as gates open and close. Comes with a keyed manual release. Recommended for
gates over 8 ft. long.
Wireless Driveway Alarm (FM231)
This device alerts you of vehicles entering and exiting your property. When a vehicle passes the
sensor, the receiver emits an audible tone and lets you know someone’s there. Functional range
of up to 400 ft. Easy-to-install.
Low Voltage Wire (RB509)
The 16 gauge, stranded, dual conductor Low Voltage Wire is for connecting the AC powered
transformer, or the Solar Panel to the control board. Also used for the connection of accessories,
such as locks, keypads, push buttons and other wired control devices. This specially designed
wire is UV treated, PVC coated and ready for direct burial.
Push to Open Bracket (FM148)
Required when Rodeo Gear gate opener must push the gate open, such as on a sloping
driveway or where space prevents gate(s) from opening inward (pulled open). Order two
brackets for conversion of a dual swing gate installation.
AUTOMATIC
GATE LOCK
®
ELECTRONIC SECURITY LOCK
1
2
ABC
3
DEF
4
GHI
5
JKL
6
MNO
7
PRS
8
TUV
9
WXY
0
Please call your retailler, or visit www.mightymule.com
for photos and detailed descriptions of Accessories.
Or call 1-800-543-GATE (4283).