Product Manual B

4 MM-LPS13 Installation Manual
rev 05.16.13
TOOLS AND MATERIALS
Tools Needed:
 • HammerDrill
 •
3
/
8
” Masonry Drill Bit
 • OpenEndWrenches
 • AdjustableWrench
 • String&StringLevel
 • ChainBreakorPunch
 • PlumbBob
 • HacksaworHeavyDutyBoltCutters
 • SmallFlatBladedScrewdriver
 • LargePhillipsScrewdriver
 • TapeMeasure
 • Level
 • WireStrippers
 • C-Clamps—small,medium,andlarge
 • CenterPunch
 • Extrapersonwillbehelpful
Materials You May Need for the Installation:
These items are NOT included with the gate opener kit.
 • Lowvoltagewire[RB509]willbeneededtorunfromthetransformertotheopenercontrolboard;length
depends upon the distance between the transformer power supply and the control arm.
 • Ifyourgateismorethan1000'awayfromanACpowersourceyouwillneedtouseatleastone10Wattsolar
panel [FM123] to charge the 12 Volt battery.
 • Galvanizedadjustablepad[R4983]orpostmount[R4984]adapter(Seeaccessoriesonpage24).
 • PVCconduitforprotectingwiring.
 • Surgeprotectionfortransformer.(page12)
 • Weatherproofoutletisrequirediftransformerispluggedintooutsideoutlet.(page12)
 • Four
3
/
8
” in diameter concrete mounting anchors.
REQUIRED Items for the Installation:
These items are NOT included with the gate opener kit. These items can be purchased separately.
 • RollerGuards(pagev)
 • SafetyEdges(pagev)
 • PhotoBeams(pagev)