Product Manual B
6 MM-LPS13 Installation Manual
rev 05.16.13
Concrete Pad
Operator should be mounted securely on a level
concrete pad. If you do not have an existing pad
to work with, be sure to to install wiring conduit
before pouring concrete. You must use four
³
/
₈
”
diameter mounting anchors, washers and nuts
(not included) to mount the operator to the pad.
Use mounting template provided (see page 9).
Check local building codes for concrete pad depth
below ground level.
Operator
New Pad
Post Mount Adapter Plate (
R4983)
Not included, sold separately.
30”galvanizedpostmountadapter.(Seeaccessories
on page 25).
Check local building codes for concrete pad depth
below ground level.
Adjustable Pad Mount Adapter Plate (
R4984)
Not included, sold separately.
Adjustable galvanized pad mount adapter mounts the
MM-LPS13 to an existing concrete pad or other mounting
surfaces (See accessories on page 25).
Pad Mount Adapter Plate can be adjusted from 6 inches to
maximum height of 10 inches.
Existing
Pad
DETERMINING MOUNTING OPTIONS