Product Manual B

MM-LPS13 Installation Manual 17
rev 05.16.13
MOUNTING THE RECEIVER
Mount Receiver as
high as possible for
optimum range.
PVC Conduit.
Receiver Installation
Check the range of the receiver before permanently mounting
it. You may have to try dierent locations before permanently
mounting the receiver. The receiver range can vary from 50 to
100 feet depending upon weather, topography, and external
interference.
Mount the receiver:
 •Ensuringaline-of-sightbetweentransmitterandantenna.
 •Atleast3feetawayfromACvoltage.
 • Ashighaspossibleforoptimumrange.
 • DONOTmountreceiverupsidedown.
The receiver cable:
 • NEVERsplicereceivercable!
 • RunthereceivercablethroughPVCconduittoprotectit
from damage.
 • DONOTruncableinconduitcontainingACwiring.
This device complies with FCC rules Part 15. Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept an interference that may cause undesired operation.
Transmitter distance may vary due to circumstances beyond our control.
NOTE:ThemanufacturerisnotresponsibleforanyradioorTVinterferencecausedbyunauthorized
modications to this equipment. Such modications could void the user’s authority to
operate the equipment.
Install the receiver on the outside
of the fence, clear of the moving
path of the gate.