Product Manual B

MM-LPS13 Installation Manual vi
rev 05.16.13
IMPORTANT SAFETY INSTRUCTIONS
Required Safety Precautions for Gates
Install Screen Guard Over Gate and Fence
Injuries may occur when people place their hands, arms, legs, etc., through openings in the gate grill when the gate is
operated, trapping them between the grill and the fence post (or fence). All openings of a horizontal slide gate must be
guarded or screened to prevent a 2 ¼” diameter sphere from passing through openings anywhere in the gate. This screen/
guard must also be installed over the portion of adjacent fence that the gate covers in the open position.
Screening will prevent access through openings in areas where the gate may travel.
Roller guard to prevent
pinch point hazard.
Roller guard to prevent
pinch point hazard.
Contact Sensor
Roller Guards
Injuries occur
when people get
their hands caught
between the gate
and the roller. Roller
guards or enclosed
tracks must be
installed to prevent
this pinch point
hazard.
The warning
signs (left) must
be installed on
both sides of
the gate.
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
play in gate area.
3. This gate is for vehicles only. Pedestrians
must use a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING
!
Entrapment Protection
Mighty Mule’s internal obstruction settings, even when properly adjusted, may not be sensitive enough to prevent bodily
injury. For this reason, safety devices such as safety edges or photo beams MUST be installed. Furthermore, a pedestrian
gate must be installed if walk-through traffic is expected near the gate.
Contact Sensor
Warning Sign
Contact Sensor
Contact Sensor
Roller Guard
Roller Guard
Pedestrian Gate
1. KEEP CLEAR! Gate may move at any time.
2. Do not allow children to operate gate or
play in gate area.
3. This gate is for vehicles only. Pedestrians
must use a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING
!
Vehicle Gate
Operator
Photo Beam
Photo Beam