Dialog Plus User Guide v.1.
Table of Contents Introduction System Requirements Package Contents Safety Message 3 3 3 4 Software Installation Software Installation for Macintosh Software Installation for Windows 5 6 6 Hardware Installation 8 Using Dialog+ 12 Turning Phone ON/OFF 13 Volume Control 13 Setting System Audio I/O 13 Setting Audio Input and Output 15 for iChat 15 Setting Audio Input and Ouput for Skype 16 Making and Answering Skype Calls 16 Making and Answering Calls from the Skype window 16 Making calls from t
Introduction Miglia Dialog+ is a simple phone handset for making iChat and Skype calls. It allows you to make conversations while walking away from the computer. System Requirements • • • • • Macintosh G4 or faster 256MB RAM iChat or Skype account USB2 port Mac OS X 10.
Safety Message Your phone is designed to use only AAA Ni-MH rechargeable batteries. Warning! Never attempt to charge non-rechargeable batteries. • The battery can be charged and discharged hundreds of times, but it will gradually wear out, when the operation time (standby time and talk time) is noticeably shorter than normal, then it is probably time to purchase batteries. • Replace all the batteries at the same time.
Software Installation Miglia Dialog+ User Guide
Software Installation for Macintosh Insert the CD Open the Install Miglia Dialog Plus installer. Click on Install Supply your administrator password to allow the installer to proceed. If iChat and Skype are open, the installer will ask you for permission to quit them. Once the software has installed, you may press Quit to quit the installer. Open Skype and iChat. Skype may ask you to allow Skype to use the software. Select the option to always allow and click Ok.
Once the installer has completed, open and sign into Skype. You will be asked to allow Dialog Plus to use Skype. Click the option to always allow this program to use Skype.
Hardware Installation Miglia Dialog+ User Guide
Hardware Installation Installing the Dialog+ hardware is relatively simple. Install batteries in the handset. Insert the Dongle into a free USB port. Turn on the phone by pressing the red on the handset until the screen backlight turns on.
Note: You only need to pair the phone and USB dongle the first time you use the phone computer. Refer to the following instructions to pair the phone and USB dongle: Press the square connect button on the USB dongle until the light turns on. Hold the phone 10cm from the dongle until the light on the dongle blinks.
Please wait 5 seconds and check that the indicator is shown on the handset display. Note: Please do not use other Cordless VoIP Phones after connecting the USB dongle on your computer. 1 2 3 4 5 Icon 1 shows the location of the wireless signal indicator on the LCD. Note: Please do not remove the dongle from the USB port while a call is in progress.
Using Dialog+ Miglia Dialog+ User Guide 12
Using Dialog+ Turning Phone ON/OFF Hold down the red key on the handset for one second to turn phone on or off. Volume Control Use the Volume keys on the left side of the handset to increase or decrease the volume. Press and hold for one second to maximize volume. Press and hold for one second to mute volume. Setting System Audio I/O Playing system sounds through speakers, keeping phone calls through the handset. Macintosh Open System Preferences, Sound. Click on the Output tab.
Windows You may find that all Windows sounds play through the handset. If this is the case, do the following: Open Control Panel by clicking on Start->Settings->Control Panel Click on Sound Click on the Audio tab Select the default device to be your desired sound device, such as the built-in sound card or a PCI card. Make sure to uncheck “Use only default devices” at the bottom of the Sounds and Audio Devices window. Click Apply and OK.
Setting Audio Input and Output for iChat In iChat preferences, on the Video pane, see that Microphone and Sound Output are set to USB Headset.
Setting Audio Input and Ouput for Skype In Skype’s preferences, on the audio pane, make sure that Audio output and Audio input are both set to USB Headset. Making and Answering Skype Calls Making and Answering Calls from the Skype window Pressing the C button on the handset toggles between the Contacts, History, and Dial Pad on the computer screen Skype window. Stay in Contacts or History tab, press the scroll up/down online contact you want, and then press to make the call.
Making calls from the LCD From the handset you can browse Contacts, History, or simply Dial a number. Press the once and the Online Contacts are ready to scroll through. Press and the LCD will show you All Contacts. Then press again to place the call. Note: In Contacts mode, the icon on the left of each contact’s name shows the online status of the contact: means online contact; Calling History from the Phone Press Press Press Press Press Press Press and the Incoming Calls list appears.
SkypeOut SkypeOut is a low cost way to make international calls from Skype to friends who still use traditional landlines or mobile phones. That means calling anyone, anywhere in the world at local rates. You will need to buy Skype Credit to make international calls. Making and Answering Calls from the iChat Window To make a call in iChat, click on the or to the right of the contact you wish to speak with.
Recording Controls To Chat Window” option in the Recorder preferences in iChat’s preferences. To access the Recorder window at any time, select “Conference Recorder” from the Audio or Video menu on the iChat menu bar.The controls provide the following options: Record: Click the center button to start recording the current AV chat. Pause: When a conference is being recorded, the center button changes to a pause symbol. You choose to pause the recording.
Appendix Handset Keys Description Miglia Dialog+ User Guide 20
Handset Icon Description History Press to enter History mode. You can check your call history and loop through Incoming, Outgoing and Missed calls on the display screen. (Use scroll up/down keys to scroll list of calls.) Contacts Press to enter Contacts mode. You can access your SkypeTM contact list and switch between Online contacts and All contacts on the display screen. Use the scroll up/down keys to scroll your contacts. Dial/Answer Press to answer or make calls.
• • Press this button to end calls or exit Contacts and History mode. 0-9, * # • Use these keys for dialing SkypeOut numbers. Press and hold for one second to maximize volume. Press and hold for one second to mute volume. LCD Indicators 1 No. 1 Indictors 2 3 5 4 Meaning Description Phone-to-PC Connection Connected, vertical bars show the signal strength.
3 Volume Level The bar goes lower as the volume goes down. Boost speaker volume (by pressing volume up key over 1 second) Speaker mute (by pressing volume down key over 1 second) 4 SkypeTM Status Online SkypeMe™ Away Not Available Don’t Disturb Invisible 5 Battery Level The bar goes lower as the battery charge runs lo w.
LCD Indicators for History mode 6 No. Indictors 7 Meaning Description 6 History Indicate the phone is in History mode. 7 Missed Calls Show missed calls. Incoming Calls Show incoming calls. Outgoing Calls Show outgoing calls. LCD Indicators for Contacts mode 8 No.
8 Contacts Indicate the phone is in Contacts mode. 9 Online contacts Show all online contacts. All contacts Show all contacts. The icon on the left of each entry shows online the contact. LCD Indicator for SkypeOut mode 10 No. 10 Indictors Meaning Description SkypeOutTM Indicate the phone is in SkypOutTM mode.
Warranty Agreement Hardware Products: Miglia Technology warrants your hardware product against any defect in material and workmanship, under normal use, for the designated warranty period. The warranty becomes effective from the date of purchase by the end user. If the product is found to be defective within the warranty period, Miglia Technology Ltd will, at its sole option, repair or replace the defective product.
