User's Manual

UV Sterilizer with Wireless Charger
1.Please connect the main device to mikai GS - 551 QC 3.0 wall adapter and connect
the adapter to wall socket.
2. Load wireless charging smartphone on the device, Sterilizing and wireless charging
is started automatically. (There is not any power button)
3. Vertical or horizontal direction can be supported.
4. After 10 minutes sterilizing, the UV LEDs turn off automatically. wireless
charging will be continued.
★ LED indicator Blue : Sterilizing and wireless charging work together
★ LED indicator Green : only wireless charging works
★ LED indicator Cyan : full charging status
★ LED indicator flickering : problem status of wireless charging
This product works with only wireless charging smartphone.
- Powered by UVC and UVA lights, mikai dalbit ss300 series disinfect and
eliminate up to 99.9% of germs, viruses and bacterias.
- Wireless charging outputs for smartphones are supporting :
QC3.0 15W / 10w / 7.5w
Features
- Size : 150 (W) * 126 (H) * 105(D)
- Input : QC 3.0 18W (12V ,1.5A)
- Wireless charging output : QC 3.0 15W (7.5W, 10W, 15W)
- Wireless charging output : 5V ,3A /9V ,1.67A /12V ,1.25A Max
- UV lights : UVC Led 6mW x 2ea / UVA Led 50mW x 4ea
www.mikai.co.kr
Specification
This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential Installation. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions. may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encourage to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experience radio/TV
technician for help.
Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Compliance
Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
FCC
Statement
Change or modification not expressly approved by the party responsible for Compliance could void the user’s
authority to operate the equipment.
User Manual
Usage
Avoid direct exposure to UV light which could be harmful for eye and skin.
Cautions
Components
main device + USB C - type cable + QC3.0 18W Adapter