OPERATION AND PARTS MANUAL SERIES MODEL MTX-60 TAMPING RAMMER (HONDA GX100UKRBF GASOLINE ENGINE) Revision #6 (08/23/11) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING PAGE 2 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
NOTES MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
TABLE OF CONTENTS MTX-60 Rammer Honda GX100KRBF Engine Proposition 65 Warning ........................................... 2 Table Of Contents ................................................... 4 Parts Ordering Procedures ..................................... 5 Safety Information ................................................ 6-9 General Information .............................................. 10 Specifications ........................................................ 11 Controls And Components ......
www.multiquip.com PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Order via Internet (Dealers Only): Best Deal! Effective: January 1st, 2006 If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip. com. Order parts on-line using Multiquip’s SmartEquip website! N View Parts Diagrams N Order Parts N Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
SAFETY INFORMATION Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the safety messages and operating instructions could result in injury to yourself and others. Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.
SAFETY INFORMATION GENERAL SAFETY CAUTION NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations. ALWAYS know the location of the nearest phone or keep a phone on the job site. Also, know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.
SAFETY INFORMATION ENGINE SAFETY DANGER The engine fuel exhaust gases contain poisonous carbon monoxide. This gas is colorless and odorless, and can cause death if inhaled. FUEL SAFETY DANGER DO NOT add fuel to equipment if it is placed inside truck bed with plastic liner. Possibility exists of explosion or fire due to static electricity. The engine of this equipment requires an adequate free flow of cooling air.
SAFETY INFORMATION TRANSPORTING SAFETY CAUTION NEVER allow any person or animal to stand underneath the equipment while lifting. NOTICE Before lifting, make sure that the equipment parts (hook and vibration insulator) are not damaged and screws are not loose or missing. Always make sure crane or lifting device has been properly secured to the lifting bail (hook) of the equipment. ALWAYS shutdown engine before transporting. NEVER lift the equipment while the engine is running.
GENERAL INFORMATION DEFINITION OF TAMPING RAMMER The Mikasa MTX-60 tamping rammer is a powerful compacting tool capable of applying a tremendous force in consecutive impacts to a soil surface. Its applications include soil compacting for road, embankments and reservoirs as well as backfilling for gas pipelines, water pipelines and cable installation work. The impact force of the MTX-60 levels and uniformly compacts voids between soil particles to increase dry density.
SPECIFICATIONS Table 1. MTX-60 Rammer Specifications Overall Height 38.8 in. (985 mm) Overall Width 13.8 in. (350 mm) Over Length 28.1 in. (713 mm) Shoe Size (Wx L) 10.4 x 13.4 in. (265 x 340 mm) Fuel Tank Capacity 2.1 qt. (2 liters) Lubrication Oil Capacity 0.69 qt. (0.65 liter) No. of Blows 644 - 695 vpm (10.7 - 11.6 Hz) Impact Force 3,060 lbf (13.6 kN) Impact Plate Stroke 2 - 3.2 in. (50 - 80 mm) Operating Weight 141 lbs.
CONTROLS AND COMPONENTS 3 10 2 4 1 5 9 6 11 7 12 13 8 Figure 1. MTX-60 Rammer Figure 1 shows the location of the controls and components for the MTX-60 Tamping Rammer. The functions of each control is described below: 1. Combination (Throttle) Lever – Used to adjust engine speed (rpm). Move lever forward (SLOW) to reduce engine speed, move lever back toward operator (FAST) to increase speed. Always operate the rammer at full speed (rpm). 2.
BASIC ENGINE Figure 2. Engine Controls and Components (Honda GX100) The engine (Figure 2) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the engine manufacturer's manual for detailed operation and service information. 1. Choke Lever – Normally used in starting the engine in cold weather conditions. In cold weather, turn the choke lever to the fully closed position. In warm weather, set the choke lever halfway or completely open. 2.
OPERATION This section is intended to assist the operator with the initial start-up of the MTX-60 Tamping Rammer. It is extremely important that this section be read carefully before attempting to operate the rammer. DO NOT use your rammer until this section is thoroughly understood. CAUTION — Understand Operation Failure to understand the operation of the Tamping Rammer could result in severe damage to the unit or personal injury. ENGINE 1. Fill the fuel tank (Figure 3) with unleaded gasoline.
OPERATION INSPECTION 1. Check all nuts, bolts fasteners for tightness. Retighten as necessary. 2. Clean any dirt from the recoil starter and foot pedestal. Wipe the entire unit clean before operating. 3. Replace any missing or damaged Safety Operation decals. 4. Adjust height of handle. Adjust handle by loosening nuts and moving handle to suit operation. Retighten nuts. DO NOT press the primer pump bulb more than four (4) times, as this will cause fuel to flood the carburetor. 3.
OPERATION OPERATION STOPPING THE ENGINE 1. To start the rammer tamping action, move the throttle lever (Figure 8) quickly from IDLE to the START ( ) position. DO NOT move the throttle lever slowly as this may cause damage to the clutch or spring. 1. Move throttle lever quickly from the START to IDLE position (Figure 9) and run the engine for three minutes at low speed. After the engine cools, move the throttle lever to the STOP position (Figure 10).
MAINTENANCE Perform the scheduled maintenance procedures as indicated: EVERY 200 HOURS DAILY Remove the oil drain plug on foot housing (Figure 13) and drain the oil. Refill with approximately 0.69 qt. (0.65 liter) of 10W-30 SE, SF or higher grade motor oil. Oil should be midway in sight glass. Break in oil should be changed after first 50 hours. Thoroughly remove dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessary.
TROUBLESHOOTING TABLE 4. Engine Troubleshooting Symptom Possible Problem Solution Difficult to start Fuel is available but spark plug will not ignite. (Power available at high tension cable). Fuel is available but spark plug will not ignite. (Power NOT available at high tension cable). Fuel is available and spark plug ignites (compression normal). Ignition plug being bridged? Check ignition system. Carbon deposit at ignition? Clean or replace ignition.
TROUBLESHOOTING TABLE 4. Engine Troubleshooting (continued) Symptom Possible Problem Solution Operation not satisfactory Rotational speed fluctuates. Governor adjustment improper? Adjust governor to correct level. Governor spring defective? Clean or replace ignition. Fuel flow erratic? Check fuel line. Air taken in through suction line? Check suction line. Recoil star ter not working properly. Dust in rotating par t? Clean recoil star ter assembly. Spring failure? Replace spiral spring.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. NOTICE The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availability of the parts listed. SAMPLE PARTS LIST NO. 1 2% 2% 3 4 PART NO. PART NAME QTY. REMARKS 12345 BOLT......................1 .....
SUGGESTED SPARE PARTS MTX-60 RAMMER 1 TO 3 UNITS WITH HONDA GX100UKRBF ENGINE Qty. P/N Description 1 ......... 956100062 ............. THROTTLE WIRE 3 ......... 366010070 ............. PRIMARY ELEMENT, AIR CLEANER 3 ......... 366010080 ............. SECONDARY ELEMENT, AIR CLEANER 1 ......... 366345570 ............. CAP, FUEL TANK W/ STRAP 2 ......... 16910Z4ES21 ........ FILTER, IN-LINE FUEL 3 ......... 9805655757 ........... SPARK PLUG 1 ......... 959300770 ............. STRAINER, FUEL TANK 1 .........
NAMEPLATE AND DECALS NAME PLATE AND DECALS ASSY. 1 4 20 0 2 # 2 3 5 STOP 0 2 # 0 7 , 0 6 11 8 k O K R K Q J q g “ i _ … q ‰ _ “ > K q _ l † J e a w † ‡ > a ‚ 1 & ' . 5 ' 4 + # .
NAMEPLATE AND DECALS NAME PLATE AND DECALS ASSY. NO. 1 2 3 4 5 6 7 8 11 20 PART NO. 920212910 920212460 920212470 920212490 920212480 920210310 920212840 920212540 920212520 PART NAME QTY. REMARKS OPERATION DECAL 1 AIR CLEANER DECAL ................................................ 1 ........ NPA-1246 LEVER OPERATION DECAL 1 MAX SPEED DECAL 4100 1 MACHINE STOP DECAL 1 EC NOISE REQ. DECAL LWA107 1 CHOKE OPERATION DECAL 1 QUICK MANUAL 1 SERIAL PLATE NO. .....................................................
CRANKCASE AND ENGINE ASSY. CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY. CRANKCASE AND ENGINE ASSY. NO. 1 2 * 3 4 5 6 7 9 10 11 12 13 14 15 16 17 19 20 21 23 23 24 25-1 25-2 26 28 29 31 32-1 32-2 33 34 35 36 36-1# 36-2# 36-3# 36-4# 36-5# 36-7# 36-8# 36-9# 37 38 39 40 PART NO.
CRANKCASE AND ENGINE ASSY. CRANKCASE AND ENGINE ASSY.
CRANKCASE AND ENGINE ASSY. CRANKCASE AND ENGINE ASSY. (continued) NO. 41 42-1 42-2 42-3 43-1 43-2 44 45 46 47 48 49 50 51 52 53 54-1 54-2 55 56 57 58 61 62 63 64 66 71-1 71-2 71-3 72 73 74 75 76 77 90 101 121 122@ PART NO.
GUIDE CYLINDER ASSY. GUIDE CYLINDER ASSY. 21 2 1 20 3 23 9 36 22 14 29 12 8 30 25 26 18 17 13 15 24 16 9 29 30 27 28 37 7 32 4 6 5-2 5-1 31 34 33 35 PAGE 28 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
GUIDE CYLINDER ASSY. GUIDE CYLINDER ASSY. NO. 1 2 3 4 5-1 5-2 6 7 8 9 12 13 14 15 16 17 18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 PART NO.
FOOT ASSY. FOOT ASSY. 2 3 8 2 3 7 1 4 5 PAGE 30 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
FOOT ASSY. FOOT ASSY. NO. 1 2 3 4 5 7 8 PART NO. 362910150 022711214 030212300 009110034 009110035 368347460 363343390 PART NAME FOOT ASSY 265W M4B NYLON NUT M12 WASHER, LOCK M12 SQUARE NECK BOLT 12X65 SQUARE NECK BOLT 12X95 FOOT COVER HANDLEBAR GRIP (FOOT) QTY. 1 4 4 2 2 1 1 REMARKS MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
FUEL TANK AND HANDLE ASSY. FUEL TANK AND HANDLE ASSY.
FUEL TANK AND HANDLE ASSY. FUEL TANK AND HANDLE ASSY. NO. 1 2-1 2-2 3 4-1 4-2 5 6 7 8 * 9 10 11 12-1 12-2 13 14 15 16 17 17% 18 19 20 21 23 40 41# 42# 43# 51 53 54 55 56 101 102 103 104 106 110 PART NO.
COMBINATION LEVER ASSY. COMBINATION LEVER ASSY. A 4 7 8 3 7 11 1 13 10 2 BODY 5 14 11 6 12 9 NOTES OLD STYLE LEVER NEW STYLE LEVER OLD STYLE LEVER BODY NO LONGER AVAILABLE. NEW STYLE ITEMS 1, 2, AND 9 ARE NOT COMPATIBLE WITH OLD STYLE BODY. IF REPLACEMENT OF ITEMS 1, 2 OR 9 IS REQUIRED, ORDER KIT “A”. TO DETERMINE IF COMBINATION LEVER ASSY IS OLD STYLE OR NEW STYLE, SEE ITEM 2, LEVER. NEW STYLE LEVER HAS MOLDED TAB AT BOTTOM.
COMBINATION LEVER ASSY. COMBINATION LEVER ASSY. NO. A PART NO. 366900032 A 1 1#@ 2 2#@ 3#@ 4#@ 5#@ 6#@ 7#@ 8#@ 9 9#@ 10# 11#@ 12#@ 13#@ 14#@ 956200110 366346260 366349430 366010180 366010310 366010190 366010200 366010210 366010220 020408050 959407650 366010260 366010320 956100062 094010051 094010052 050200150 050200110 PART NAME QTY. REMARKS COMB. LEVER ASSY W/ THROTTLE WIRE ... 1 ...... INCLUDES ITEMS W/ # ..................................................................................
HONDA GX100KRBF ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 36 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 2 * 3 * 5 6 7 8 9 10 11 12 * 13 14 15 16 PART NO. 12000Z0DV00 12201Z0D305 12204Z0D305 12311Z0D000 12355Z0D000 12365Z0D000 15571Z0DV71 15572ZM7000 15721Z0DV70 90014952000 91202KJ9003 93500030050A 9805655757 15171Z0DV00 90008ZM7000 PART NAME QTY. REMARKS BARREL ASSY., CYLINDER ....................................... 1 ........ INCLUDES ITEMS W/ * GUIDE ASSY., EX VALVE (O.S.) 1 GUIDE, INLET VALVE (O.
HONDA GX100KRBF ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 38 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. 1 3 4# 5 * 9 * 10 11 12 13 * 14 15 * 16 * 17 * 18 19 21 * 23 24 26 27 28 PART NO. 11300Z0D409 15600ZM7003 15625ZE1003 16510ZL8000 16531ZE1000 16541Z0D000 90121952000 90131ZE1000 90451ZE1000 90601ZE1000 90602ZE1000 91202KJ9003 9410106800 9425108000 9430108200 91001Z0DV01 11511Z0DV10 91231891003 9430306100 957010804500 934021004000 PART NAME QTY. REMARKS COVER ASSY., CRANK CASE .................................... 1 ........
HONDA GX100KRBF ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. 3 f 8 16.8 85.3 6 PAGE 40 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 3 6 * PART NO. PART NAME QTY. REMARKS 13310Z0DV70 CRANK SHAFT COMP. ............................................... 1 ........ INCLUDES ITEM W/ * 91001Z0DV01 BEARING, RADIAL BALL 2 MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — PISTON/CONN. ROD ASSY. PISTON AND CONNECTING ROD ASSY. PAGE 42 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — PISTON/CONN. ROD ASSY. PISTON AND CONNECTING ROD ASSY. NO. 1 2 3 4 4 5 * 6 PART NO. 13010Z0D003 13101Z0D000 13111ZE0000 13200Z0D000 13200Z0D305 90001ZM7000 90551ZE0000 PART NAME QTY. REMARKS RING SET, PISTON 1 PISTON 1 PISTON PIN 1 CONNECTING ROD ASSY. ........................ 1 ............INCLUDES ITEM W/ * CONNECTING ROD ASSY. ........................ 1 ............
HONDA GX100KRBF ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 44 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 14320Z0D010 14324Z0D000 14400Z0D003 14431Z0D000 14441Z0D000 14461ZL8000 14711Z0D000 14721Z0D000 14751Z0D000 14771ZM3010 90012333000 90206001000 91301ZM0V31 12209KT7013 PART NAME PULLEY, COMP.
HONDA GX100KRBF ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 46 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 PART NO. 28400Z0DV03ZA 28410Z0DV02ZA 28421Z0DV02 28422ZG0W02 28433ZG0W02 28441ZW6003 28442ZH8003 28461ZH8003 28462Z0DV02 28467Z0DV02 28468Z0DV02 90003ZH8003 957010600800 PART NAME QTY. REMARKS RECOIL STARTER ASSY ............................... 1 ........ INCLUDES ITEMS W/ * CASE COMP.
HONDA GX100KRBF ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 48 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. 1 3 PART NO. 19610Z0DV00ZB 90014952000 PART NAME FAN COVER CP. BOLT, FLANGE 6X14 (CT200) QTY. 1 4 REMARKS MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — CARBURETOR ASSY. (S/N T-3423 AND BELOW) CARBURETOR ASSY. (S/N T-3423 AND BELOW) 11 18 9 2 37 17 16 10 35 15 31 19 20 32 21 38 33 36 38 34 24 4 28 26 29 30 5 12 7 31 23 25 27 42 40 39 40 6 1 3 8 14 13 25 PAGE 50 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — CARBURETOR ASSY. (S/N T-3423 AND BELOW) CARBURETOR ASSY. (S/N T-3423 AND BELOW) NO. 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 13 * 14 * 15 * 16 * 17 * 18 * 19 * 20 * 21 * 22 * 23 * 24 * 25 * 26 * 27 * 28 * 29 * 30 * 31 * 32 33 34 35 36 37 38 39 40 42 PART NO.
HONDA GX100KRBF ENGINE — CARBURETOR ASSY. (S/N T-3424 AND ABOVE) CARBURETOR ASSY. (S/N T-3424 AND ABOVE) PAGE 52 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — CARBURETOR ASSY. (S/N T-3424 AND ABOVE) CARBURETOR ASSY. (S/N T-3424 AND ABOVE) NO. 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 * 14 * 15 * 16 * 17 * 18 * 19 * 20 * 21 * 22 * 23 * 24 * 25 * 26 * 27 * 28 * 29 * 30 * 31 32 33 34 35 36 37 38 * 39 40 41 * 41 * 41 * 41 * 42 44 * 45 * 46 * 47 * PART NO.
HONDA GX100KRBF ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. 8 14 10 11 PAGE 54 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 8 10 11 14 PART NO. 17228Z0DV01 90042Z4ES30 9405005000 17410Z4ES30 PART NAME PACKING, AIR CLEANER STUD BOLT 5X95 FLANGE NUT 5MM ELBOW, AIR CLEANER QTY. 1 2 2 1 REMARKS MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 56 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO. 1 2 3 4 5 6 PART NO. 18310Z0DV20 18321Z0DV20 18381Z0D000 90014952000 90048Z0DV00 90343ZE6000 PART NAME MUFFLER COMP. MUFFLER PROTECTOR GASKET, MUFFLER VOLT, FLANGE 6X14 (CT200) STUD BOLT 5X78 NUT, SELF-LOCK 6MM QTY. 1 1 1 3 2 2 REMARKS MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — FLYWHEEL IGNITION ASSY. FLYWHEEL IGNITION ASSY. 3 7 7 12 4 11 1 10 9 PAGE 58 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — FLYWHEEL IGNITION ASSY. FLYWHEEL IGNITION ASSY. NO. 1 3 4 7 9 10 11 12 * PART NO. 13331ZM7000 30564ZA5000 31110Z0D003 90022888010 9405012000 28451Z0DV02 30500Z0DV02 30700Z0DV01 PART NAME QTY. REMARKS WOODRUFF KEY 25X18 1 GROMMET, CORD 1 FLYWHEEL COMP. 1 FLANGE BOLT 6X20 2 FLANGE NUT M12 1 STARTER PULLEY 1 IGNITION COIL ASSY ................................................. 1 ........ INCLUDES ITEMS W/ * TERMINAL ASSY. 1 MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — CONTROL ASSY. CONTROL ASSY. 3 17 5 20 11 15 10 4 9 19 12 6 20 11 8 8 PAGE 60 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — CONTROL ASSY. CONTROL ASSY. NO. 3 4 5 6 * 8 9 10 * 11 * 12 * 15 17 19 20 * PART NO. 16555Z0DV00 16561Z0DV00 16562Z0DV00 16594883010 90014952000 90015ZE5010 90605230000 92301050200A 93500040060H 9405006000 16550Z0DV01 16500Z4ES30 9400105000 PART NAME QTY. REMARKS GOVERNOR ROD 1 GOVERNOR SPRING 1 SPRING, THROTTLE RETURN 1 HOLDER, WIRE 1 VOLT, FLANGE 6X14 (CT200) 2 BOLT, GOVERNOR ARM 1 CIR CLIP 1 BOLT 5X20 1 SCREW 4X6 1 FLANGE NUT 6MM 1 GOVERNOR ARM 1 CONTROL ASSY ..................
HONDA GX100KRBF ENGINE — LABELS ASSY. LABELS ASSY. PAGE 62 — MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
HONDA GX100KRBF ENGINE — LABELS ASSY. LABELS ASSY. NO. 2 4 6 14 PART NO. 87521Z0DV01 87528Z0D000 87601Z4ES30 89216130690 PART NAME LABEL, TRADE MARK MARK, CHOKE MARK, TYPE (KRBF) WRENCH, SPARK PLUG QTY. 1 1 1 1 REMARKS MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
TERMS AND CONDITIONS OF SALE — PARTS PAYMENT TERMS 5. Parts must be in new and resalable condition, in the original Multiquip package (if any), and with Multiquip part numbers clearly marked. 6. The following items are not returnable: Multiquip reserves the right to quote and sell direct to Government agencies, and to Original Equipment Manufacturer accounts who use our products as integral parts of their own products. a. SPECIAL EXPEDITING SERVICE Terms of payment for parts are net 30 days.
NOTES MTX-60 RAMMER • OPERATION AND PARTS MANUAL — REV.
OPERATION AND PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING UNITED STATES Multiquip Corporate Office 18910 Wilmington Ave. Carson, CA 90746 Contact: mq@multiquip.com MQ Parts Department Tel. (800) 421-1244 Fax (800) 537-3927 Mayco Parts 800-427-1244 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Warranty Department 800-306-2926 310-537-3700 Fax: 800-672-7877 Fax: 310-637-3284 Service Department 800-421-1244, Ext. 279 310-537-3700, Ext.
