Datasheet

MCU Cards

for BIGAVR2

™

development system

Manual

All Mikroelektronika’s development systems feature a large number of peripheral

modules expanding microcontroller’s range of application and making the

process of program testing easier. In addition to these modules, it is also

possible to use numerous additional modules linked to the development system

through the I/O port connectors. Some of these additional modules can operate

as stand-alone devices without being connected to the microcontroller.

Additional Board

PAGE 1
for BIGAVR2™ development system All Mikroelektronika’s development systems feature a large number of peripheral modules expanding microcontroller’s range of application and making the process of program testing easier. In addition to these modules, it is also possible to use numerous additional modules linked to the development system through the I/O port connectors. Some of these additional modules can operate as stand-alone devices without being connected to the microcontroller.
PAGE 2
MCU Cards for BIGAVR2 Development System The BIGAVR2 development system is supported by empty 64- and 100-pin MCU cards. Schematics provided herein show these MCU cards with soldered microcontrollers. Instead of microcontrollers used in these examples, you can choose and solder another ones. Prior to soldering, check which microcontrollers can be placed on the respective MCU card just to be sure that they are compatible.
PAGE 3
Figure 2: 100-pin MCU card and microcontroller connection schematic Figure 3: Empty MCU card Figure 1-4: Dimensions of MCU card for BIGAVR2 MikroElektronika
PAGE 4
If you have any questions, comments or business proposals, do not hesitate to contact us at office@mikroe.com If you are experiencing some problems with any of our products or just need additional information, please place your ticket at www.mikroe.com/en/support If you want to learn more about our products, please visit our website at www.mikroe.