Datasheet

Programming PIC Microcontrollers in BASIC - mikroElektronika
routines are intented for use with CF that have FAT16 and FAT32 file system. Note: routines for file
handling (CF_File_Write_Init, CF_File_Write_Byte,
CF_File_Write_Complete) can only be used with FAT16 file system, and only with PIC18
family!
File accessing routines can write file. File names must be exactly 8 characters long and written in
uppercase. User must ensure different names for each file, as CF routines will not check for possible
match. Before write operation, make sure you don't overwrite boot or FAT sector as it could make
your card on PC or digital cam unreadable. Drive mapping tools, such as Winhex, can be of a great
assistance.
http://www.mikroelektronika.co.yu/english/product/books/picbasicbook/08.htm (8 sur 12)05/11/2004 02:28:30