User Manual

1.
2.
1.
2.
3.
GPEN21
GPEN21
GPEN21 allows powering a PoE capable device over the Ethernet, using the same voltage, as provided with the DC input jack.
Powering
The device accepts power from a direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) 12-57 V DC.
Max power consumption 50 W.
Power output
The device supports PoE out from the Ethernet port located under the cover. You can power Mikrotik devices that support passive powering through
Ethernet.
GPEN21 has an Ethernet and SFP port for fiber connectivity. Customers can choose to use GPEN21 to power the optical module for uplink to provider, or
to power Ethernet uplink to the provider (that uses our GPeR and/or netPower products), which cannot be used together.to provide PoE
Mode button
Reserved for future use.
Mounting
Step 1:
Remove the cover screw using a PH2 screwdriver;
Remove the cover to access mounting points.
Step 2:
Drill holes using drill bit;
Insert dowels if needed;
Attach the unit to the wall and secure it with screws.