Specifications

ManualsBrandsMikroTik ManualsComputers & AccessoriesLoRaWAN Gateway mini PCIe card R11e-LoRa9

Table Of Contents

R11e-LoRa9

R11e-LoRa9 - LoRa mPCIe Gateway module. Can be integrated into RouterBOARD product with mPCIe slot.

Requires LoRa package installation to configure in RouterOS.

Specifications

Low power-consuming with mini PCIe interface, for long-distance data transmit.

• Interface - Mini-PCIe

• Temperature Operating -40 / +70

• Supports Class A,B and C

• Frequency - 902-928MHz (US)

• RF Output power - 902-928MHz (US)

• Range 10km (@ 980bps) Depends on the antenna used.

Installing the module in your device

R11e-LoRa9 for professional use. Each of the cards comes in ESD protective packaging. When handling electrical

equipment please observe the following safety precautions:

• Use a wrist grounding strap when unpacking and working with electrical components to avoid electrical

discharge (ESD) damage.

• After unpacking please place the card on the anti-static mat.

• When installing make sure there are no objects that can damage or touch the PCB plate.

• The card can be installed in your desired device using the factory provided screw holes in a PCB plate.

Pictures added for illustration purposes, the device configuration and the placement of the miniPCIe card may vary.

• Locate miniPCIe slot on your device.

• Unscrew two factory attached screws.

• Place thermal pad to the heat sink plate.

See mikrotik.com/products for the latest version of this document. Page 1, Document #51982 Modified on: 10.SEP.2019

Summary of content (6 pages)

PAGE 1
R11e-LoRa9 R11e-LoRa9 - LoRa mPCIe Gateway module. Can be integrated into RouterBOARD product with mPCIe slot. Requires LoRa package installation to configure in RouterOS. Specifications Low power-consuming with mini PCIe interface, for long-distance data transmit. • • • • • • Interface - Mini-PCIe Temperature Operating -40 / +70 Supports Class A,B and C Frequency - 902-928MHz (US) RF Output power - 902-928MHz (US) Range 10km (@ 980bps) Depends on the antenna used.
PAGE 2
• Install module to the miniPCIe slot and secure with previously removed screws. Tightening torque 0,3 Nm. Connecting to the antenna If your device does not have internal antennas, it is possible to connect to the external antennas by adding cable connectors, product code – ACSMAUFL. https://mikrotik.com/product/acsmaufl Please connect and disconnect the antenna, when the device is turned off! • Attach antenna cables to the installed module.
PAGE 3
Configuration for RouterOS To set the configuration for LoRa please connect to the device and log in with your web browser, Winbox or mobile application. Two easy steps to follow: First step: 1. Once logged in, Quick Set will be selected, please switch to WebFig on the right side of the screen. If the configuration is done through mobile application then click on the gear symbol on the right side of the screen to open up an advanced menu. 2. On the left side menu please find and select section “Lora”. 3.
PAGE 4
Federal Communication Commission Interference Statement FCC ID: TV7LR9 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 5
OEM statement. This module is intended for OEM installations only. As such the OEM integrator is responsible for ensuring that the end-user has no manual instructions to remove install or modify the module. This module is limited to installations in mobile or fixed applications. OEM integrators may utilize antennas of like an equal or lesser gain as appearing in the list in this document (reference 47 CFR, paragraph 15.204(c)(4) for further information on this topic.
PAGE 6
Industry Canada IC:7442A-LR9 This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.