Specifications

Configuration for RouterOS
To set the configuration for LoRa please connect to the device and log in with your web browser, Winbox or mobile
application. Two easy steps to follow:
First step:
1. Once logged in, Quick Set will be selected, please switch to WebFig on the right side of the screen. If the
configuration is done through mobile application then click on the gear symbol on the right side of the
screen to open up an advanced menu.
2. On the left side menu please find and select section “Lora”.
3. On the newly opened window select Servers tab.
1. Click + to add new server configuration.
2. A New window will appear and you will have to enter:
Name: (Server name)
Address: (Server address)
Up port: (Usually it's 1700)
Down port: (Usually it's 1700)
3. Click OK to save.
Second step:
4. Select the Device tab on the previous window.
5. Double-click or tap on the line to configure.
6. Choose previously entered network on the drop-down menu.
7. Click on the button Enable to enable the gateway.
8. Click OK to save.
9. The configuration is done.
Specifications
For more information about this product, specification and pictures please visit our web page:
https://mikrotik.com/product/ R11e-LoRa9
Operating system support
The module supports RouterOS software version v6. Other operating systems have not been tested.
See mikrotik.com/products for the latest version of this document. Page 3, Document #51982 Modified on: 10.SEP.2019