GPEN (Gigabit Passive Ethernet Network) Concept Cut costs, not speed – forget about the expensive GPON! This is the cheapest way for any ISP to deliver high-speed internet to individual apartments.
GPEN Concept MikroTik GPEN concept can replace any existing or future GPON solution. It provides all the benefits of GPON, but utilizes well-proven, simple and inexpensive Ethernet solutions.
GPEN Concept GPEN11 The GPEN11 is a power injector that can power your uplink devices via PoE. It is part of the GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy Ethernet alternative. It also has a designated space for an ISP sticker on the front. Sticker size: 66 x 25 mm (2,5 x 1 Inches). GPEN11 can be mounted inside customer premises, next to the wireless router which provides connectivity to the users.
GPEN Concept GPEN21 The GPEN21 is a smart power injector that serves as an advanced software controlled repeater. Not only can it power your uplink devices via PoE, it can also provide a range of useful software features: • Interface management and monitoring It also has a designated space for an ISP sticker on the front. Sticker size: 66 x 25 mm (2,5 x 1 Inches).
GPEN Concept GPEN21 software provides Interface management and monitoring GPEN link fault detection VLAN support Basic Traffic Shaping GPEN Concept 5
GPEN Concept GPeR The Gigabit Passive Ethernet Repeater (GPeR) is part of our new GPEN (Gigabit Passive Ethernet Network) concept, which aims to replace GPON installations with lower cost and more easy to deploy Ethernet alternative. The GPeR unit allows to extend Ethernet cable by additional hop (< 100 - 150 m to regular network devices, and up to 210 m to another GPeR unit) up to 1,500 m.
GPEN Concept GPeR IP67 Case We bring you a sturdy and affordable outdoor enclosure for GPeR units. It can be easily mounted on walls and poles. Despite the name, meticulous testing revealed that in real life the enclosure has an IP68 rating with protection from immersion in water, as well as protection from dust. Get an outdoor enclosure for the GPeR to safely extend Ethernet network in mines, caves, maintenance shafts or outdoors.
GPEN Concept netPower 15FR With netPower 15FR switch you can forget about expensive GPON base stations and optical splitters. This switch is a part of our GPEN concept – aimed to bring the speed and versatility of fiber networking while using the advantages of Ethernet. It is a cheap and easy to deploy way for any ISP to deliver internet to individual apartments. You don’t have to worry about power options in the attic or the utility room – netPower 15FR has 15 reverse PoE-in ports.
GPEN Concept Specifications Product Code CRS318-1Fi-15Fr-2S-OUT CPU 98DX224S 800 MHz Size of RAM 256 MB Storage type Flash Storage size 16 MB Switch chip model 98DX224S Number of 100 Mbps Ethernet ports 16 SFP ports 2 Operating system SwOS / RouterOS (Dual boot) RouterOS license level 5 PoE-in Yes Supported input voltage 18 - 57 V (DC jack); 36 - 57 V (PoE-in) Number of DC jacks 1* Dimensions 304 x 212 x 71 mm Operating temperature -40°C to +70°C tested Max power consumption
GPEN Concept To power netPower from a single GPEN To power netPower that provides PoE-out to uplink from a single GPEN Examples Power adapters 48POW 48 V, 1.46 A, 70 W 24HPOW 24 V, 2.5 A, 60 W 48V2A96W 48 V, 2 A, 96 W MT48-480095-11DG 48 V, 0.95 A, 45.6 W MT48-570080-11DG 57 V, 0.8 A, 45.
